Heat energy - Import export

FOR THE INTERMEDIATE STORAGE OF RENEWABLE ENERGIES – FROM 200 TO 2,000 M³ The LIPP® thermal storage tank is the tailored thermal storage solution for renewable energies with an effective volume ranging from 200 to 2,000 m3 which is suitable for individual customisation. Expedient thermal storage is a prerequisite for the effective utilisation of heat from biogas plants, biomass cogeneration plants, solar plants or other heat sources. The flexible capacity LIPP® buffer storage tank provides the ideal solution for this application. The tanks are fabricated on site using the tried and tested LIPP® Double Seam System and the stainless steel VERINOX®. Insulation can be tailored to the intended application in order to produce large volume, above ground storage tanks with an individually customised interior. The tanks are designed for non pressurised operation with an operating temperature of up to 95 °C and are suitable for use with heating water. No additional nitrogen system necessary.

The RotathermCarat achieves particularly highquality baking results thanks to the special rotation technology. The innovative rotation of the trolley in the air flow focusing at the centre ensures products of unparalleled consistency even at extremely high temperatures. With the special air guidance within the system, the RotathermCarat also convinces with the shortest process times – and a capacity increase of 100% as compared to standard baking systems! Best baking results thanks to unique rotation technology Capacity increases of up to 100% Short heating and baking times Up to double trolley loads as compared to standard baking systems Lesser weight loss as compared to conventional systems (amortisation of the investment costs through weight loss saving alone possible in less than 6 months) Reduction of the area demand Saving heating energy by highquality insulation Optionally installed CIP cleaning to reduce personnel effort

The Autovent 3000 ensures optimal cooking processes at smallest weight loss without any fans at all! Instead, the system's patented nozzles use the internal dynamics of lowpressure steam, converting it into air speed and heating energy. For you, this means Shorter cooking times and weight loss reduced by up to 15%! High turbulences due to patented AUTOVENT nozzles and air velocities of up to 200 m/s Short cooking times and up to 15% less weight loss Temperature difference across the system no more than 1 °C Uniform products at highest quality Very low maintenance and operation costs from dispensing with fans Long service lives from stainless steel construction and steamtight welding allround

Items that have initially been bagged using a machine from Hugo Beck often need to be shrunk so as to ensure a tight-fitting film and the perfect packaging finish to meet the highest standards. Adapted for each packaging system, we supply the appropriate shrink tunnel in all sizes and performance ranges for the production of high-quality shrink packaging. As such, we manufacture shrink tunnels in a number of versions, with a variety of rods and chains that operate like a link mesh belt. Textile mesh belts are also possible for very light products. In each case, the length of the shrink tunnel depends on the speed of packaging and on the film material selected. State-of-the-art air ducting and heat recovery ensure efficient energy use, helping us to contribute to both protection of the environment and reducing energy costs. The decision on whether to use a shrink tunnel with circulating air or convection principle is defined depending on the individual product application of the customer.

As well as the high quality, end customers and engineering offices alike appreciate Lipp’s process expertise and close, professional working methods. In addition to individual planning and timely installation, the service package is also rounded off by extensive tank inspections. Depending on customer requirements, Lipp offers its partners support in the preparation of necessary planning criteria such as design, heat and energy calculations etc. Lipp’s objective is to be the most reliable partner for municipal sewage treatment plants and for engineers for municipal waste water treatment and sludge digestion. To achieve this, in addition to the product quality, the professional, timely and economical completion of projects is constantly being improved. In order to work with end users and engineering offices as effectively as possible, the technical process expertise is also being constantly expanded by the ongoing qualification of employees and high investments in research.

With the heat pumps from FrigorTec, the energy of a warm aeration / gas removal or waste water is usually exploited. This is often the case in large kitchens, hospitals or the like. But FrigorTec also offers heat pump series, which come into use in building technology and are used effectively to heat residential or commercial buildings.

The advanced EndoFlex™ endothermic gas generator combines the patented EndoInjector™ fuel injection generator control system with the high-efficiency ReactionCore™ technology to lower operation and maintenance costs associated with producing high quality endothermic gas for your heat treatment furnaces. The generator is equipped with the latest sensors to monitor dew point, unreacted methane, and energy consumption. The touchscreen interface provides easy access to review generator operations, and the integrated paperless chart recorder tracks generator performance to meet production auditing requirements. ReactionCore™ technology is a proprietary generator design that replaces a single large retort with several smaller centrifugally-cast retorts to significantly increase the surface area, improve the heating efficiency of the reaction chamber, and reduce the heating energy required for the production of endothermic gas. In addition, the smaller retort design significantly...

It doesn’t get any more flexible: The MICO-M generator comes with casters so that it can be moved quickly wherever needed. Customers may choose between a medium-frequency (20, 25, or 30 kW) and a high-frequency version (15 kW). All-round solution for induction heating This induction technology has a wide variety of applications: Brazing flat copper wires for machines, heating stress bolts in the construction of power plants, or hardening forming tools — are only a few of the examples. The secret of the machine’s success is its intelligent mix of compact size, quality, and mobility.A MICO-M energy container includes the generator itself, the active coolant system, the PLC system controller, and the hose bundle. The entire unit is also easy to move around with the casters.

ECO LINE MF generators: Efficient energy sources for hardening, heating, joining, etc. ECO LINE medium-frequency generators have a wide variety of configuration options allowing the solution to always be perfectly matched to the application. The device can be used as a stand-alone solution or integrated into an overall system to provide a perfect energy source. MF generator without compromises This powerful and robust technology is available from eldec with power ratings from 5 to 150 kW and frequencies from 10 to 40 kHz. Its strengths are in the many details of the machine, such as short-proof transistor technology, precise energy dosing, and its high efficiency of over 90 percent. Users benefit from a virtually maintenance-free, medium-frequency generator that quietly does its job, takes up little space, and can easily be integrated into the controller thanks to its multiple control options (Profibus/Profinet interface available on request).

NEOPOR® MEANS OPTIMAL INSULATION. Neopor® comes into its own when perfect insulation is called for. The expanded foam is a version of Styropor® that contains graphite with insulation properties that are ten percent better. The very low thermal conductivity combined with high compressive resistance makes it the perfect material for technical molded parts. Storopack uses Neopor® to manufacture insulation elements for building sections such as the roof and walls as well as perimeter bases and panels for laying underfloor heating systems. Up to 70 percent of heat energy can be saved with Neopor® thermal insulation compared to homes with no exterior insulation. Storopack products made of Neopor® are used in heating and air conditioning applications for insulating boilers, pumps, and heating controls and as housing for modern home ventilation systems. The technical molded parts can be expanded to optimally fit around contours so that no heat is lost.