Frequency converters - Import export

Our high frequency converters are providing frequencies of up to 2 MHz at up to 200 kW output. For lower frequencies down to 4 kHz we have our mid range frequency converter series MU.

Our mid range frequency converters are delivering up to 250 kW output at frequencies down to 4 kHz. For high frequencies up to 2 MHz we have our high frequency converter series HU.

With frequency converter for variabel cutting speed setting. For belt sanding steel, titanium and other metals.

The 72711 belt sander offers all benefits of the 72780 series but with only one side. It is made for heavy duty applications. For sitting or standing operation. Variable cutting speeds from 900 to 2,800 Rpm. Optionally with frequency converter.

The MEMDOS LB solenoid-driven diaphragm dosing pump is the ideal solution for applications where the pump needs to be integrated into control systems or control loops. Thanks to its robust plunger drive and the option of manual or automatic capacity adjustment, the MEMDOS LB reliably and precisely doses various media such as acids, alkalis, precipitants and flocculants. The dosing capacity is adjusted either by mechanically adjusting the stroke length or by controlling the speed of the three-phase motor via a separate frequency converter. This flexibility enables precise control of the flow rate to meet different requirements. On request, the MEMDOS LB is also available with a double diaphragm system, which offers additional safety and reliability. This combination of versatile control and robust design makes the MEMDOS LB the ideal choice for demanding dosing tasks.

The new strain gage amplifier with IO-Link interface enables digitalization of the measurement technology right from the sensor. Its compact design and high degree of protection allow the instrumentation amplifier to be used practically anywhere in the field. Strain gage sensors typically have an output voltage of a few millivolts. In industrial environments, e.g. in the vicinity of electric motors or frequency converters, interference can affect the measurement result when transmitting analog signals. This is reliably avoided using the new strain gage amplifier with IO-Link interface. The analog link between the sensor and instrumentation amplifier is kept as short as possible, the standardized IO-Link communication is fully digital and interference-free. The amplifier is powered directly via the IO-Link interface – a standardized 5-wire cable with M12 socket. Strain gage sensors can be connected via a 4-pin M8 connector.

Inductive displacement sensors of this series measure linear displacements and indirectly all mechanical values convertible into displacements by additional equipment (i.e. tension and compression forces, extension, torque, vibration). The sensor body equipped with a connector has an outer diameter of only 8 mm and therefore is especially well suitable for the integration in dimensionally restricted structures. Typical application fields are displacement and extension measurements on: —Machines —Servo systems —Motor vehicles —Test benches —Production plants The cylindrical case made of stainless steel, houses a differential transformer (LVDT). It consists of a primary and two secondary coils with axially moveable core. A displacement of this core changes the magnetic induction of the coils. The INLINE carrier frequency amplifier converts the displacement into a direct proportional electrical DC voltage.

Particularly for testing passenger car engines, truck engines and transmission units with combustion engines, when - the electric mains is too weak for frequency converters, - cooling water is not available or water-cooling is not desired, - air-cooled eddy-current brakes are not sufficient.

Adapter enabling electrical equipment using an earthed socket system to be used in countries with the British plug system. This travel adapter is not a transformer or a frequency converter. Childproof socket. With 13 A fuse. In blister packaging. Max. load: 13 A/250 V

7 versions for use in over 150 countries. Safe, universal mains adapter enabling electrical equipment with a European plug system to be plugged into other types of power point abroad. Easy and safe to use. With earthed socket outlet. Seven plug adapters. Childproof socket. Fabric assortment bag included. Travel plugs are not transformers or frequency converters. With 10 A fuse. Max. load: 10 A/250 V in compliance with national regulations Plug-in system: DE

Spindles with air-cooled, three-phase, built-on motor Pre-tensioning of the precision bearing groups using a spring system that does not have to be readjusted Long-lasting grease lubrication Non-wearing labyrinth seal system Spindles are completely balanced dynamically Taper true running <= 0.002 mm Drive via frequency converter or direct connection to main power supply Diameter to length ratio of up to 1:20 possible Further available spindle dimensions are listened in the spindle datasheet below ( PDF download 190KB). Spindles are not sold on the Webshop, but spindle inquiries are accepted.

High-performance grinding spindles with a watercooled asynchronous motor External taper on working side Pre-tensioning of the precision bearing groups using a spring system that does not have to be readjusted Long-lasting grease lubrication Non-wearing labyrinth seal system with air seal Spindles are completely dynamically balanced Taper true running <= 0.002 mm Drive via frequency converter Diameter to length ratio of up to 1:20 possible Further available spindle dimensions are listened in the spindle datasheet below (PDF download 312KB). Spindles are not sold on the Webshop, but spindle inquiries are accepted.

High-performance grinding spindles with a watercooled asynchronous motor External taper on working side Pre-tensioning of the precision bearing groups using a spring system that does not have to be readjusted Long-lasting grease lubrication Non-wearing labyrinth seal system with air seal Spindles are completely dynamically balanced Taper true running <= 0.002 mm Drive via frequency converter Diameter to length ratio of up to 1:20 possible Further available spindle dimensions are listened in the spindle datasheet below (PDF download 312KB). Spindles are not sold on the Webshop, but spindle inquiries are accepted.

High-performance grinding spindles with a watercooled asynchronous motor External taper on working side Pre-tensioning of the precision bearing groups using a spring system that does not have to be readjusted Long-lasting grease lubrication Non-wearing labyrinth seal system with air seal Spindles are completely dynamically balanced Taper true running <= 0.002 mm Drive via frequency converter Diameter to length ratio of up to 1:20 possible Further available spindle dimensions are listened in the spindle datasheet below (PDF download 312KB). Spindles are not sold on the Webshop, but spindle inquiries are accepted.

Spindles with air-cooled, three-phase, built-on motor Pre-tensioning of the precision bearing groups using a spring system that does not have to be readjusted Long-lasting grease lubrication Non-wearing labyrinth seal system Spindles are completely balanced dynamically Taper true running <= 0.002 mm Drive via frequency converter or direct connection to main power supply Diameter to length ratio of up to 1:20 possible Further available spindle dimensions are listened in the spindle datasheet below ( PDF download 190KB). Spindles are not sold on the Webshop, but spindle inquiries are accepted.

Spindles with air-cooled, three-phase, built-on motor Pre-tensioning of the precision bearing groups using a spring system that does not have to be readjusted Long-lasting grease lubrication Non-wearing labyrinth seal system Spindles are completely balanced dynamically Taper true running <= 0.002 mm Drive via frequency converter or direct connection to main power supply Diameter to length ratio of up to 1:20 possible Further available spindle dimensions are listened in the spindle datasheet below ( PDF download 190KB). Spindles are not sold on the Webshop, but spindle inquiries are accepted.

High-performance grinding spindles with a watercooled asynchronous motor External taper on working side Pre-tensioning of the precision bearing groups using a spring system that does not have to be readjusted Long-lasting grease lubrication Non-wearing labyrinth seal system with air seal Spindles are completely dynamically balanced Taper true running <= 0.002 mm Drive via frequency converter Diameter to length ratio of up to 1:20 possible Further available spindle dimensions are listened in the spindle datasheet below (PDF download 312KB). Spindles are not sold on the Webshop, but spindle inquiries are accepted.