Results for
FLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
For lifting of ground parts, bulk material and for occasional sorting out of magnetizable parts. ERM are equipped with mounted switch and integrated rectifier, for direct connection to 230 V mains voltage. The field depth is approx. 80-120 mm. Not permitted for transporting solid workpieces in unprotected areas.
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
EHG electromagnetic holding rods are used in fixture construction, for gripper systems and for a wide variety of tasks in mechanical engineering. EHG holding rods consist of a screwed, two-part system, are double-coated and sealed to IP 65. Max. Operating temperature 60°C Standard voltage 24,48,110V DC Protection class IP 53 ED 100%
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
The use of pole reversal control devices to control lifting magnets makes it possible to adjust the magnetic field very precisely. Thus, the USGs can be continuously adjusted in holding force and perform a demagnetizing cycle when switched off, which ensures that all parts are released and unwanted residual magnetism in the workpiece is minimized. USG pole reversal control units can be controlled via potential-free contacts with machine controls or pushbuttons in the crane operation and provide feedback on their switching status. As an option, we can also supply manual control units and signal lamp sets to match the pole reversal control units.
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
For lifting of ground parts, bulk material and for occasional sorting out of magnetizable parts. ERM are equipped with mounted switch and integrated rectifier, for direct connection to 230 V mains voltage. The field depth is approx. 80-120 mm. Not permitted for transporting solid workpieces in unprotected areas.
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
FXE electro-permanent lifting magnets are equipped with on-board control technology for direct connection to mains voltage - the fast, user-friendly plug & play solution for loads from light to super heavy. Different pole types are available, depending on the material thickness and surface to be moved.
Request for a quoteASSFALG GMBH
Germany
The electropermanent load lifting magnets from the EMPH series are suitable for the lifting and transportation of individual slabs and unprocessed blocks. These magnets are used to handle loads with a large air gap or with scaled surface. Only a 400V rated current must be provided to use these devices and they are then immediately ready for use. Through short electrical impulses within seconds, the EPMH from ASSFALG are automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. Through the impulse current control, the EPMH load lifting magnets do not use much energy. The effectiveness and efficiency can be seen on the one hand in the reduction of operating costs and on the other hand in a saving of time.
Request for a quoteASSFALG GMBH
Germany
The SB950-SF is equipped with the highest safety technology. The electropermanent battery lifting magnet SB950-SF is the top product from ASSFALG in the 950kg load range for flat material. 400kg can be lifted for round material. The SB950-SF has an installed sensor. It measures the magnetic force, compares it with the workpiece weight and shows on the display if the workpiece can be transported. Parameters such as surface property, material thickness and material are considered here. They combine the advantages of permanent load lifting magnets with those from electro load lifting magnets. Through electrical impulses within seconds, the electropermanent battery lifting magnet SB950-SF from ASSFALG can be automatically or manually switched with the push of a button. Even though no electricity is present during the load transportation, the workpiece is clamped as securely as it would be with permanent load lifting magnets.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
With linear continuous signal to indicate tank content
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Available in many versions for use in a wide variety of media such as water, acids, oils, fuels, etc. Float and housing in plastic Versions for mounting vertically or horizontally With cable outlet or plug connection
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Electromagnetic cylinders and actuators for use in applications where compressed air is either not available, too expensive, too slow or for other reasons is not the optimal solution.
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Incremental length probe with magnetic detection principle for high reliability. with USB interface. Very high accuracy and repeatability. Resolution 0,1µm or 0,5µm Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines. Basic measuring software included
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Incremental length probe with magnetic operating principle Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring fixtures, assembly and production lines
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
High precision incremental length probe with magnetic operating principle Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
High precision incremental length probe with magnetic operating principle Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Available in brass, aluminum, stainless steel, various float types and with ATEX approval for use in a wide variety of media such as water, acids, oils, fuels, etc. Installation Vertical and 45° / 90° curved With cable outlet or plug connection
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Incremental lengths probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust. Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing plants.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
MAGNESCALE EUROPE GMBH
Germany
Incremental lengths probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust. Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing plants.
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Incremental length probe with magnetic detection principle for high reliability. Very high accuracy and repeatability Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Incremental length probe with magnetic detection principle. Very high accuracy and repeatability Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Incremental length probe with magnetic detection principle for high reliability. with USB interface. Very high accuracy and repeatability.. Resolution 0,1µm or 0,5µm. Extremely insensitive to contamination such as oil mist, moisture and dust. Ball spline bearing of the spindle for long life time. Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines. Basic measuring software for evaluation included.
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Incremental lengths probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust. Extremely robust against oscillations and vibrations due to the Ø 32mm clamping shaft. The probe pin (without spring) is fixed with a magnetic tip on the surface of the measuring object. This allows the change in position of the target to be detected with high accuracy. Perfect for position detection of machine axes.
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Read head for magnetic tape scale SL710/720/730 Pl101-R/RH: 1Vpp interface PL101-RA/RHA: TTL line driver interface (RS422) PL101-RM/RHM/RP/RHP/RY/RHY: with serial interface from Mitsubishi (M), Panasonic (P) or Yaskawa (Y) Max. Response speed: 6.4m/s with 1Vpp Max. Resolution: 0.2µm with TTL (phase to phase) Easy installation Protection class: IP67 (RH version), IP50 (R version) Resistant to oil, dirt, vibration and shock
Request for a quoteKENDRION (VILLINGEN) GMBH
Germany
Electromagnetic brakes are used wherever moving masses have to be driven or decelerated as quickly as possible. Our wide range of products covers a wide variety of requirements. All brakes can be used in any installation position and require hardly any maintenance. All variants are powerful and operate with all-round safety and reliability. They feature short operating times, low inertia torques and ventilation that is free of residual torque.
Request for a quoteKENDRION (VILLINGEN) GMBH
Germany
Electromagnetic clutches are used wherever moving masses have to be driven or decelerated as quickly as possible. Our wide range of products covers a wide variety of requirements. All clutches and brakes can be used in any installation position and require hardly any maintenance. All variants are powerful and operate with all-round safety and reliability. They feature short operating times, low inertia torques and ventilation that is free of residual torque.
Request for a quoteKENDRION (VILLINGEN) GMBH
Germany
Kendrion (Aerzen) Mini Permanent magnet brakes open electromagnetically. The braking torque without backlash is generated by permanent magnets. The brakes can be installed in any position. High quality magnets ensure safe functionality. The rated torque is achieved immediately at the time of delivery without any running-in procedure.
Request for a quoteKENDRION (VILLINGEN) GMBH
Germany
The main characteristic of the magnetic particle clutch is the possibility to smoothly change the torque depending on the field voltage. To transmit the torque from the external to the internal rotor, specifically alloyed and highly abrasion-resistant iron particles are inserted into the particle gap. Depending on the electromagnetic field, these fine iron particles build magnetic chains and thus transmit the torque. The power of the field determines the stability of the particle chains and also the transmittable torque.
Request for a quoteKENDRION (VILLINGEN) GMBH
Germany
Electromagnetic clutches and brakes by Kendrion (Aerzen) transmit the torque and brake torque through dry running friction material. With DC voltage applied, the torque is transmitted without backlash. Using the prestressed spring of the armature, a release, free of residual torque is ensured. These clutches and brakes can be installed in any mounting position and hardly need any maintenance. Kendrion (Aerzen) offers standard clutches from 0.3 to 3.6 Nm as well as customer- and application-specific solutions up to 5 Nm.
Request for a quoteKENDRION (VILLINGEN) GMBH
Germany
Electromagnetic clutches and brakes of Kendrion (Aerzen) GmbH are easy to install and integrate into the machinery concept/layout with no setting up or running in. Kendrion offers a combination fitted on a hollow shaft for applications where clutches and brakes work together. The units are based on the successful magneta components. They are fitted on a through shaft. The unit is fixed using simply two screws and is ready for operation then. Electromagnetic clutches and electromagnetic brakes from Kenrion (Aerzen) GmbH transmit the drive torque and braking torque frictionally in dry running conditions. If a DC current is applied, the torque is transferred without backlash. Residual torque free ventilation in a de-energised state is ensured by the prestressed annular spring of the armature section. The clutches and brakes are suitable for every mounting position and require almost no maintenance.
Request for a quoteResults for
Electromagnet - Import exportNumber of results
41 ProductsCompany type