electromagnet

...This special automatic table top/vertical with stand constant heat sealer. Are suitable for sealing polypropylene and paired / laminated bags, paper, barrier materials, etc. The sealing jaws of the type "hot bar" are equipped with resistance and thermoregulator for controlling the temperature from 30 ° C to 200 ° C. The closing of the jaws is through an electromagnet which ensures a high sealing...

Founded in 1987, Yalçın Group began its journey as one of Turkey's first suppliers of electroplating additives. With over thirty years of rich history, we have consistently been at the forefront of pioneering electroplating solutions both in Turkey and globally. Since 2006, we have been manufacturing plating plants and rectifiers, and our commitment to innovation has led us to establish two distin...

...The permanent holding magnets achieve a holding force of up to 35,000 N in the de-energized state and are designed for long holding of magnetic workpieces. When the DC-excited coil is switched on, the permanent magnetic field on the holding surface is neutralized and the workpiece to be held can be removed. The electromagnet holds loads even in the event of a power failure and only needs to be...

...Equipped with 3 power levels, they allow for sheet metal depiling. Benefits: Since it is a permanent magnet electromagnet, the battery is only used during demagnetizations, which gives it a long autonomy. There is no risk that the load falls because it is an electromagnet with permanent magnet. They are equipped with a force sensor that prevents the release of the load if the load is not put on the ground (which naturally prevents dropping). Lifting capacity for flat piece:200 kg to 950 kg...

...A direct current electromagnet that generates a force field at the pole surfaces, which is used for holding, carrying, and fixing ferromagnetic workpieces.

...DESCRIPTION Circular electromagnet, heavy-duty and service cycle of 75% ED. Built of copper or aluminum coil, according to capacity requirements. Among the construction characteristics, it is worth mentioning: ·Heavy-duty monobloc carcass of moulded steel with high strength ribs and high mechanical strength ·Two protection shields of non magnetic steel ·Heavy-duty connection box...

...The battery-operated permanent lifting electromagnet has a load range of 200kg | 500kg | 950kg for flat materials and 50kg | 200kg | 400kg for round materials. The battery-operated permanent lifting electromagnet is switched automatically or manually via a push-button with electrical impulses within one second. Although current does not flow during load transport, the piece is held as securely as...

Since 1947, RAOUL LENOIR has specialized in magnetic lifting, metal separation and detection, and much more. For nearly 70 years, the company has made its expertise and know-how available to you by developing industrial magnetic applications to meet your needs, regardless of your industry: recycling, steel and finished product distribution, metallurgy, mining, quarries, power plants, agri-food, or...

...Set on a trolley for unloading grinders or glazing lines. Mobile unit on wheels for screening, de-ironing, and pneumatic pump transfer of glazes. The compact design makes it an ideal machine for use directly at the output of grinders or glaze storage tanks. Gravity de-ironing is achieved using neodymium bars or an electromagnet, which are efficient, lightweight, and easy to clean manually. Warranty: 2 years Available in different diameters from 800 to 1500mm...

...Overband Electromagnet...

...- Simplified installation for 2 locks (2 Electromagnets or 1 Electromagnet and 1 Electric Strike). - 2 Outputs for lock control (5A/12V dc NO/NC). - 2 Relay status LEDs. - Direct connection to the CTV900A control panel connector. - Fire Alarm Input. Instant opening of passages. - Current consumption: 100mA. PCB dimensions (L x W): 45 x 43mm Current consumption: 100mA...

...Electromagnetic Couplings from Schramme. Electromagnets in the form of electromagnetic couplings are magnetic systems with an open magnetic circuit and are suitable for power transmission to couplings when activated, such as for connecting units to motors. The electromagnets listed below are examples of solutions implemented in series. Magnetbau Schramme develops custom solutions. If you are looking for a suitable electromagnet for your series project, feel free to reach out to us. Our team will definitely assist you.

... lifting magnets! However, electromagnets serve as the structural basis for a whole range of components and electromagnetic actuators: Electromagnets (pot magnets, holding magnets, ...) Lifting magnets (U-shaped magnets, cylindrical magnets, etc.) Rotary magnets (true rotary magnets and lifting rotary magnets) Note: an electromagnet by itself is not yet an actuator!

...automatic delivery, digital display, scraper, electromagnet, coolant system, year of manufacture 2002, gt. Technical Data: - Max. grinding length: 1730 mm - Max. grinding width: 930 mm - Vertical travel: 550 mm - Electromagnet plate: 1600x800 mm - Grinding wheel: 400x60x127 mm - Drive power of grinding spindle: 11/15 kW - Approx. weight: 6500 kg Storage number: 6.1-684...

...Winding: Copper, Aluminum, Superconductors, Wire, Profiles, Stranded Wire Electromagnet Cores, Ferrite Assembly, Insulations, Impregnation, Vacuum Casting CAD - Tool Design Qualification...

...The electromagnetic separators suspended on conveyor belts, are the most effective equipment for removal of ferrous contamination from other nonferrous materials. Consist of an electromagnet which creates powerful magnetic fields that are generated by electrical coils which provide the required attractive force to separate the iron pieces. Those pieces are attracted towards the poles remaining...

DIMET GmbH is a manufacturer of lifting magnets and customized lifting solutions for the steel and scrap processing industry, with headquarters in Germany and a sales network worldwide. We design and manufacture a wide range of electromagnets, spreader beams, lifting cranes, iron separators, UPS systems, and magnet controllers, as well as specially designed lifting equipment. We are a proud membe...

...-excitation period. Afterwards, the rectifier switches to the set holding voltage, which must not exceed the rated voltage of the electromagnet. Nominal input voltage: max. 415 V AC Max. output current ADC: Over-excitation: 4 - 12 A; Holding excitation: 2 - 9 A Over-excitation: yes Quick disconnection: external Standards: CE, ROHS, IP 00 Accessories (optional): DIN rail mounting, open circuit board, pluggable screw terminals...

... de-energized, the key remains captive and the status contact is open. When voltage is present at the input of the housing and if the button is pressed, the coil is energized, allowing the key to be turned. When the key is free, the status contact is closed. Model "A" operation When voltage is present at the input of the housing, the electromagnet coil is energized, and if the key is in the captive position, the key remains captive and the status contact is open.

...The magnetic drums can be installed and used for the direct separation of ferrous foreign objects or at the discharge of a conveyor belt, as a deflection or drive drum. Our drum magnets can be manufactured with either permanent or neodymium magnets, as well as in the design of an electromagnet. The required diameters and working lengths are calculated by us or produced according to your system.

...Kavidoors sliding and vertical fire doors are supplied in fire-resistant panels with insulating filling, equipped with upper hangers that move horizontally along a rail or vertical guides. The normal position of these doors is open, held in place by an electromagnet. Once the closure is activated (by a fire detection signal, power cut, etc.), the counterweight system will cause the door to close.

...In electrically excited direct current motors, the magnetic field of the stator is generated using an electromagnet. Power from 5 to 2,000 W. Voltages from 12 to 180 V - other voltages available upon request. In the ESTAN shunt motors, the excitation winding is connected in parallel to the armature winding. With this type of excitation, the speed remains nearly constant under load. APPLICATION...

...-quality electromagnetic valve (electromagnetic actuator) with indirect action made of brass. High flow capacity. Working fluid: water, air, gas, petroleum products, etc. Easy replacement of the electromagnet (coil). Compact design. All standard voltages.

...Our power supply provides provides 3A for the whole range of current. This guarantees reliable work of device with different length of wiring. Two channels allows separate power providing for the electromagnet lock and for the intercom or camera. Input voltage:110-220V Output voltage:12-24V Minimum current:3A Overall dimension:111/80/35 mm Weight:0,35kg...

... • Door safety contacts: 2 x PNP / 500 mA • Unlock command: PLC-compatible (12 ~ 30 VDC / 2 ~ 5 mA) • Diagnostic errors: Bolt jammed, undefined power supply, undefined temperature, electromagnet failure, series connection error • Reset: controlled • "SMART Consumption" for minimal power consumption when connected in series • Auxiliary lock: female triangular key 8 mm x 14.2 mm (optional) • Mounting: 4...

100% focused on B2B, our offer is to propose to our clients to co-develop their solutions. This approach is summarized in our slogan: "You have needs, we have solutions". As a true partner, we complement your skills with a comprehensive solution approach. This approach is "tailor-made"; it is co-constructed with each client, as we combine our knowledge to develop "the solution" optimal for all or...

... electricity and "pull" the sorted parts. Subsequently, these are lifted by the lifting unit and transported upwards over the bunker belt or through the funnel of the feeding system. The lifting unit then lowers, and the electromagnet is switched off. Advantages: • Simple feeding for large quantities • Alternative to lift-tilt devices • Requires little space...

...Electric overband magnet systems are used where a greater magnetic field depth is required. Additionally, their magnetic field is active only during the switching duration. The coils of the strong electromagnet are made of aluminum band windings, which exhibit excellent thermal properties and thus a high insulation class. They do not require external cooling (air or oil cooling). The compact control cabinet ensures optimal space conditions.

... be manual, mechanical, pneumatic, hydraulic, or with an electromagnet. The electromagnets are available in various explosion protection types ATEX EEx (d), EEx (de), EEX (ia/ib), and EEx (me). The valves of larger nominal sizes are internally or externally pilot-operated. The valves are designed to be used up to 700 bar (temperature range from -55°C to +80°C).