Rods - Import export

The rod lock BS is a mechanical device for securely locking the piston rod in any position in the event of a pressure drop. For cylinders with a design according to ISO 15552 and 6432 VDMA.

Double-acting pneumatic cylinder with piston rod in a special design for use in a press-in device.s

The stopper cylinders are developed to stop or block moving parts, e.g. in an assembly line. The large dimensioned piston rod also allows use as a stand-by stop device.

The rod lock BS is a mechanical device for securely locking the piston rod in any position in the event of a pressure drop. With manual unlocking.

Cylinder with double piston rod as anti-rotation device against linear movement of the piston rod. Design based on ISO standard. Available sizes diameter: 32, 40, 50, 63, 80, 100 mm.

Cylinders with Ertalyte piston rods are particularly suitable for use in the food and chemical industries. High resistance to acids, good electrical insulating properties, wear resistance, excellent sliding properties and even resistance to gamma rays or X-rays allow it to be used under difficult conditions. For the use of pneumatic cylinders in environments with radioactive radiation, we also stock cylinders with radiation-resistant seals.

Single-acting pneumatic cylinder with two parallel working piston rods made of brass, nickel-plated or stainless steel.

A single-acting rod seal, Zurcon® L-Cup® is an alternative to the U-Cup. It is a highly effective sealing system offering optimized sealing performance and extended service life. With exceptionally low friction properties, it has high wear resistance, back pumping ability along with high static and dynamic tightness.

The POLYPAC® - Balsele is a compact rod seal consisting of an elastomeric sealing element and an integrated fabric reinforced base. Due to the radial pre-load an excellent sealing performance will be achieved even at low pressures. The fabric reinforced base prevents the seal from extrusion.

POLYPAC® - Veepac is a set of fabric reinforced Chevron rings comprising of a support ring , sealing rings and a pressure energising ring . In the packing set the energising axial force is transferred between the individual packing rings so that each ring is pressed into positive contact with the rod surface. Additional to the standard material special material grades are available for a large variety of working conditions.

Double Delta® combines the flexibility and response of O-Rings with the wear and friction characteristics of the Turcon® materials in. The double acting performance of the seal follows from the symmetrical cross section which allow the seal to respond to pressure in both directions. Initial contact pressure is provided by radial compression of the O-Ring. When the system pressure is increased the O-Ring transforms this into additional contact pressure, the contact pressure of the seal is thereby automatically adjusted so sealing is ensured under all service conditions.

In heavy duty applications, leak free performance and high service life cannot be assured by a single sealing element; therefore, specially developed ”system seals” are arranged in series, building a ”tandem configuration”. Each sealing element in a system has its specific function and their interaction needs to be secured to get a redundant sealing system. The primary seal in Zurcon® material has an excellent wear and extrusion resistance under extreme working conditions. It allows a fine lubrication film passing this first barrier, ensuring the necessary lubrication of the secondary sealing element for long service life. The ”tandem arrangement” requires an outstanding back-pumping ability of the primary seal and the secondary seal, if a double acting scraper is installed.

The double acting Turcon® Glyd Ring® is a combination of a Turcon® based slipper seal and an energising O-Ring. It is produced with an interference fit which together with the squeeze of the O-Ring ensures a good sealing effect even at low pressure. At higher system pressures, the O-Ring is energised by the fluid, pushing the Turcon® Glyd Ring® against the sealing face with increased force.

The Zurcon® U-Cup has a very high sealing performance with lower friction and lower heat generation than standard U-Cups. The special shape of the trimmed lips allows for outstanding wear and extrusion resistance. Compatible with virtually all media, it also has a wide operating temperature range.

The Turcon® Glyd Ring® T is a double-acting O-Ring energized rod seal for dynamic applications, offering low friction with no stick-slip, minimal break out force and high wear resistance. The trapezoidal cross-section of the Turcon® Glyd Ring® T provides very good static leak-tightness and the angles of each lip are designed to provide improved leakage control and better resistance to extrusion.

A single-acting sealing element comprised of a U-shaped Turcon® ring and V-shaped metallic energizing finger spring. Suitable for reciprocating and light duty rotary movement. Compatible with most fluids and chemicals and efficient in a wide range of temperatures, it offers low friction with no stick-slip, minimal break out force and high wear resistance.

The Zurcon® U-Cup has a very high sealing performance with lower friction and lower heat generation than standard U-Cups. The special shape of the trimmed lips allows for outstanding wear and extrusion resistance. Compatible with virtually all media, it also has a wide operating temperature range.

This single-acting O-Ring energized rod seal is made of Turcon® and provides high static and dynamic sealing results. Can be installed together with other seals in a tandem configuration for advanced static and dynamic tightness. The Turcon® Stepseal® 2K offers high extrusion resistance, low friction with no stick-slip, minimal break out force and high wear resistance.

Turcon® Variseal® W2 is a single-acting rod seal consisting of a U-shaped jacket and a corrosion-resistant Slantcoil® spring. The advantage of the seal lies in its low friction and relatively constant preloading force over a large deformation range. Suitable for reciprocating and light duty rotary movement, it is often interchangeable with an O-Ring and Back-up Ring.

A single-acting O-Ring energized rod seal with hydrostatic ventilation for use in dynamic applications. Prevents pressure build-up between seals in all service conditions. Low friction with no stick-slip, minimal break out force and high wear resistance. Recommended for use with a secondary rod seal in Turcon® material, together with a double-acting Excluder® or Scraper.