Direct acting - Import export

The force to be measured must be introduced axially and perpendicularly to the entire surface of the inner and outer bands of the sensor in the opposite direction. Conversion of the acting force into an electrical output signal is performed by strain gages connected together in a full bridge circuit. To achieve optimal accuracy, the base of the sensor should rest on a smooth level surface, hardened to at least ≥ 58 HRC with sufficient dimensions. The base cover welded to the surface has a stabilizing effect on the sensor element. Lateral forces must be avoided anyway as they distort the measured results. Tension and bending relief for the sensor cable is to be carried out on the machine side. FEATURES: — Measuring ranges from 0 ... 100 N to 0 ... 200 kN — Centric throughout hole — Flat disc design — Made of stainless steel — Completely welded sensor body — Nominal characteristic value standardization possible — burster TEDS optionally available

Coaxial highpressure valves are valves with two connections and two switching positions. The pressure range extends from vacuum up to 400 bar. The wall thicknesses for the valve housing and head tube as well as the selection of the seals and the retaining screws are specially designed for high pressure applications. This series is typically used in gas filling stations and test benches, in compressor and hydraulic systems and in washing machines. The KB valve types have a special feature They do not require dynamic plastic seals and can be used in cryogenic application.

The lateral valves are solenoid valves with two or three connections and two switch positions in the basic position closed (NC). In this type of construction, the magnetic drive is not arranged coaxially, but laterally. Additionally, this valve construction is not pressurebalanced, and the switchable pressure range is therefore significantly smaller than with valves in a coaxial design. However, the lateral design is often sufficient for applications in the lowpressure and rough vacuum range and, thanks to its simple construction, also offers a very attractive price. Lateral valves are particularly wellsuited to the packaging, glass, metal, and furniture industries as a robust and fast switching valve for lifting tools (suction cups). Since they do not require dynamic seals, they are ideally suited for rough use in a dusty environment. They are therefore also recommended for use in vacuum furnaces.

The lateral highpressure valves are valves with two or three connections and two switching positions. The pressure range extends from vacuum up to 500 bar. In this type of construction, the valve drive is not arranged coaxially, but laterally.

Whenever several valves are to be used in a confined space and with minimal piping, a module or strip solution is recommended. In contrast to single piping, the expense for valve piping, fittings, working time, and possible leaks is almost cut in half.

The 3/2way solenoid valves are electrically operated solenoid valves with three connections and two switching positions. These valves are hermetically sealed on the outside and have proven themselves when used with liquid, gaseous, dirty, or poisonous (toxic) media. Even if the seals are completely worn out, no process medium can escape.