Din - Import export

are designed for optimal joint performance with lower in-place fastening costs. Trilobular thread shape Improves and expedites thread engagement and the initial thread forming Resists loosening caused by vibrations Provides a higher uniform drive Prevents internal thread stripping

are designed to deliver cost-effective optimal joint performance for thin sheet metal applications. Tapered Thread Under Head Maintains full thread major diameter immediate to the surface Undercut Head Material extruded by the screw is absorbed while the under-head contact area is increased allowing for enhanced thread engagement and resistance to stripping Rounded Tip Provides easy entry into small holes with self-extrusion of the sheet metal as well as increase resistance to stripping Trilobular Build Provides resistance to loosening caused by vibration. Available with all Drive System Significantly extends tool life Ideal drive system for maximum torque transfer

With all the properties and variants of our standard cylinders DIN / ISO 15552. Completely made of stainless steel for use in harsh environments, marine, pharmaceutical and food industries.

With internally protected sealing lip. With O‑ring for sealing in the groove base. For high peripheral speed and increased chemical resistance

The European Standard EN 10204 specifies different types of test documents, which we can provide in accordance with the order agreements. This standard supplements other standards which define the general technical terms and conditions of supply. We can supply the following types of test certifications in accordance with EN 10204: Certification of conformance with the order: Works certificate 2.1 to EN 10204, P/N 400008840 Certification of conformance with the order indicating results from non-specific testing: Works certificate 2.2 to EN 10204, P/N 400008841 Test results based on specific testing from authorised expert, independent from manufacturing: Acceptance certificate 3.1 to DIN 10204, P/N 400008844 Certificate of linearity test: Linearity record P/N 400009988

Work thread – Hose clamp DIN 3017, Form A with hexagon head screws SW 7 S

Design of the housing in the form of a groove should be avoided if possible. If this is not feasible, good housing and seal cleanability must be guaranteed. The hygienic design requirements can be met by having a particularly large groove base radius, avoiding notches and having a split housing. For WIP/WOP cleaning it is important to be able to remove and replace the seal without damaging it. Given a suitable machine design, cleaning in place is also possible.

Design of the housing in the form of a groove should be avoided if possible. If this is not feasible, good housing and seal cleanability must be guaranteed. The hygienic design requirements can be met by having a particularly large groove base radius, avoiding notches and having a split housing. For WIP/WOP cleaning it is important to be able to remove and replace the seal without damaging it. Given a suitable machine design, cleaning in place is also possible.

The tandem configuration of type 116 allows static pressure maintenance in the critical unpressurized range and at low pressure. The security of this function is guaranteed by use of the IDG materials U95, U96 or U99 on the low pressure or atmospheric side.

The tandem configuration of type 114 allows static pressure maintenance in the critical unpressurized range and at low pressure. The security of this function is guaranteed by use of the IDG materials U95, U96 or U99 on the low pressure or atmospheric side.

Today resistance thermometers are one of the important precision and operating measurement instruments of technical temperature measurement. Fast and easy testing of display, control and recording devices in measurement and process engineering is essential. Fixed temperature values can easily be simulated according to the characteristic curves of Pt100, Pt500 and Pt1000 using the precision resistors calibrated in °C (the inscription also includes the resistance value in Ω). The small dimensions of the resistors allow the installation in measuring instruments or measuring circuits for comparison or control measurements. Features: — TK ≤ 10 ppm/K — More than 60 fixed temperature values from -200 °C ... +800 °C ex stock — Calibration in acc. with DIN EN 60751 n - 0.02 % tolerance for the models 1144-Pt 100, 1144-Pt 500 and 1144-Pt 1000 — ± 0.05 % tolerance for model 1146-Pt100 — Resistance material MANGANIN®

The AE06L is a 1/16 DIN controller designed as an as a over temperature limit protection. The universal input can be easily configured for most thermocouple and signal types, while the 3 alarm outputs can each be setup with different set-points providing multiple limit alarm logic capability to meet most application requirements.

The AE25™ is a ¼ DIN multi-loop process controller provides easy operation and review of process variables and set-point information. FEATURES • controls carbon potential, dewpoint, temperature, and oxygen concentration • paperless chart recorder with USB port for data retrieval • Ethernet (Modbus-TPC) communication port for remote process monitoring and control. • simplified PID tuning with Auto-tune reduces startup configuration time and quickly gets your process up and running fast

The press-fit connection provides an enduring mechanical and electrical connection between the printed circuit board and plug connectors. The Compliant Pin has many applications and our customers use them in a wide variety of products, including sensor and radar casings, electronic controllers, plug connectors, printed circuit board connectors and more. Advantages: — no complex soldering process — high mechanical stability — repairable — gas-tight connection at the point of contact

Dehydrating breathers are being used for liquid immersed transformers in order to protect the insulating liquid and prevent the harmful moisture absorption from ambient air, which occurs when the load on the transformer fluctuates.The dehydrating breather removes practically all moisture from the air that flows through it into the conservator when the transformer is cooling down. This largely prevents any reduction of the dielectric strength and the formation of condensation in the expansion tank. Thus, the dehydrating breathers increases the operational safety of transformers.

Our radiator valves DIN 42560 type A and type A OR are designed to be welded onto the transformer wall or on connection pipes. The radiator will be flanged on the four M16 holes (PCD=160 mm). The housing of the radiator valve is made of forged steel S355J2G3 and thus not subject to any leakage as it may occur with casted housing. Due to the metal sealed clap a low leakage is permitted while the soft-sealed radiator valve is absolutely oil- and vacuum-tight. Both types are absolutely tight in operation condition to the outside. Our welding neck radiator valves DIN 42560 type A NW 80 fulfil the tightness requirements and operating conditions in accordance with DIN 42560 as well as EN 50216-8.

Name: Christoph Albrecht: Whatsapp number: +49 178 6222033 Company name: New World Handel GmbH Premium wood Pellets,Hot Sales Quality Wood pellets for sale/Fir, Pine, Beech wood pellets in 15kg bags Wood pellets fuel is a limitless and environment friendly fuel source. It is a clean burning and cost stable home heating alternatives. Ash amount: 0.7% max Moisture: 10% max Diameter: 6 mm-8mm Length: 10mm-50mm Made from pure wood , no bark Bright, uniform surface color No horizontal or vertical cracks Density: 650kg/m3 min calorific value: 4100 to 4500 kcal/kg Uniform size: quality in production Clear in water cup test Non Toxic Fumes Zero Additive Package: 15KG/PP woven bag or 20KG/PP woven bag or as per customers choice with desired logo. 80% pine – 20% beech (white) pellets Diameter: 6 mm Lenght: < 30 mm Humidity: < 10% Calorific value: 4300 +/- 0,05 Kcal/kg Sulfur: < 0,03% Ash content: < 0,7% Additives: < 2%

Name: Christoph Albrecht: Whatsapp number: +49 178 6222033 Company name: New World Handel GmbH Premium wood Pellets,Hot Sales Quality Wood pellets for sale/Fir, Pine, Beech wood pellets in 15kg bags Wood pellets fuel is a limitless and environment friendly fuel source. It is a clean burning and cost stable home heating alternatives. Ash amount: 0.7% max Moisture: 10% max Diameter: 6 mm-8mm Length: 10mm-50mm Made from pure wood , no bark Bright, uniform surface color No horizontal or vertical cracks Density: 650kg/m3 min calorific value: 4100 to 4500 kcal/kg Uniform size: quality in production Clear in water cup test Non Toxic Fumes Zero Additive Package: 15KG/PP woven bag or 20KG/PP woven bag or as per customers choice with desired logo. 80% pine – 20% beech (white) pellets Diameter: 6 mm Lenght: < 30 mm Humidity: < 10% Calorific value: 4300 +/- 0,05 Kcal/kg Sulfur: < 0,03% Ash content: < 0,7% Additives: < 2%

Name: Christoph Albrecht: Phone number: +49 178 6222033 Company name: New World Handel GmbH Premium wood Pellets,Hot Sales Quality Wood pellets for sale/Fir, Pine, Beech wood pellets in 15kg bags Wood pellets fuel is a limitless and environment friendly fuel source. It is a clean burning and cost stable home heating alternatives. To burn wood pellet is a good way to divert millions of tons of waste from landfills and timber industry and turn it into energy. Ash amount: 0.7% max Moisture: 10% max Diameter: 6 mm-8mm Length: 10mm-50mm Made from pure wood , no bark Bright, uniform surface color No horizontal or vertical cracks Density: 650kg/m3 min calorific value: 4100 to 4500 kcal/kg Uniform size: quality in production Clear in water cup test Non Toxic Fumes Zero Additive Package: 15KG/PP woven bag or 20KG/PP woven bag or as per customers choice with desired logo.

Name: Christoph Albrecht: Whatsapp number: +49 178 6222033 Company name: New World Handel GmbH Premium wood Pellets,Hot Sales Quality Wood pellets for sale/Fir, Pine, Beech wood pellets in 15kg bags Wood pellets fuel is a limitless and environment friendly fuel source. It is a clean burning and cost stable home heating alternatives. Ash amount: 0.7% max Moisture: 10% max Diameter: 6 mm-8mm Length: 10mm-50mm Made from pure wood , no bark Bright, uniform surface color No horizontal or vertical cracks Density: 650kg/m3 min calorific value: 4100 to 4500 kcal/kg Uniform size: quality in production Clear in water cup test Non Toxic Fumes Zero Additive Package: 15KG/PP woven bag or 20KG/PP woven bag or as per customers choice with desired logo. 80% pine – 20% beech (white) pellets Diameter: 6 mm Lenght: < 30 mm Humidity: < 10% Calorific value: 4300 +/- 0,05 Kcal/kg Sulfur: < 0,03% Ash content: < 0,7% Additives: < 2%