Din - Import export

The power supply modules of the IM82-24 series feed DC consumers and especially our IM, IMS and IMC interface modules with 24 V. The devices are mounted on DIN rail and meet protection class IP20. The output current is - depending on the type - 2.5 A, 5 A, 10 A or 20 A. Thanks to their universal AC/DC input, the power supplies can be used worldwide in numerous networks. Other features include high efficiency, as well as temperature resistance and dynamic overload capability.

are designed for optimal joint performance with lower in-place fastening costs. Trilobular thread shape Improves and expedites thread engagement and the initial thread forming Resists loosening caused by vibrations Provides a higher uniform drive Prevents internal thread stripping

are designed to deliver cost-effective optimal joint performance for thin sheet metal applications. Tapered Thread Under Head Maintains full thread major diameter immediate to the surface Undercut Head Material extruded by the screw is absorbed while the under-head contact area is increased allowing for enhanced thread engagement and resistance to stripping Rounded Tip Provides easy entry into small holes with self-extrusion of the sheet metal as well as increase resistance to stripping Trilobular Build Provides resistance to loosening caused by vibration. Available with all Drive System Significantly extends tool life Ideal drive system for maximum torque transfer

stainless steel plates*shear resistant pattern

Ideal for marking storage locations Available in DIN A5 and A4 format Available as open and closed version Made of stable and anti-reflective hard plastic Coloured rim optional available

stainless steel plates*shear resistant pattern*top plate with hole Ø 10 mm*for flexible clamp*no. 2684, 2686*rubber feet

New construction patented DE 20 2010 006 420*height adjustment by hand or cordless drill: precise,secure, quick*mobile and network-independent operation*integrated safety clutch*stainless steel plates*shear resistant pattern*top plate with Ø 10 mm hole*slip-proof rubber feet*suitable 1/4" bit for cordless drill included in delivery

New construction patented DE 20 2010 006 420*height adjustment by hand or cordless drill: precise,secure, quick*mobile and network-independent operation*integrated safety clutch*stainless steel plates*shear resistant pattern*top plate with Ø 10 mm hole*slip-proof rubber feet*suitable 1/4" bit for cordless drill included in delivery

stainless steel plates*shear resistant pattern*easy going movement*assistance (pneumatic springs)*top plate with hole Ø 10 mm*for flexible clamp*no. 2684, 2686*rubber feet

New construction patented DE 20 2010 006 420*height adjustment by hand or cordless drill: precise,secure, quick*mobile and network-independent operation*integrated safety clutch*stainless steel plates*shear resistant pattern*top plate with Ø 10 mm hole*slip-proof rubber feet*suitable 1/4" bit for cordless drill included in delivery

stainless steel plates*shear resistant pattern*top plate with hole Ø 10 mm*for Usbeck flexible clamp*no. 2684, 2686*rubber feet

stainless steel plates*shear resistant pattern*easy going movement*assistance (pneumatic springs)*top plate with hole Ø 10 mm*for Usbeck flexible clamp*no. 2684, 2686*rubber feet

Wrapped spring steel plain bearing | Requires maintenance | DIN 1498 | DIN 1499 FER-MET® is a spring steel plain bearing without integrated sliding material. Lubrication of the bearing point is necessary. Very high load capacity and impact resistance for heavy-loaded applications with impact loads. Very wear-resistant. A standard gap design with a straight slot and without chamfer inside [EG], but can also be manufactured with other slot shapes if required. For technical details, please visit the product page on our website!

DIN Norm 30664,1*outside Ø 14 mm*inside Ø 10 mm

air regulation, needle valve, pilot flame, DIN 30665

air regulation, needle valve

With all the properties and variants of our standard cylinders DIN / ISO 15552. Completely made of stainless steel for use in harsh environments, marine, pharmaceutical and food industries.

With internally protected sealing lip. With O‑ring for sealing in the groove base. For high peripheral speed and increased chemical resistance

DIN Cells (Standard) Bolted 198mm wide

The European Standard EN 10204 specifies different types of test documents, which we can provide in accordance with the order agreements. This standard supplements other standards which define the general technical terms and conditions of supply. We can supply the following types of test certifications in accordance with EN 10204: Certification of conformance with the order: Works certificate 2.1 to EN 10204, P/N 400008840 Certification of conformance with the order indicating results from non-specific testing: Works certificate 2.2 to EN 10204, P/N 400008841 Test results based on specific testing from authorised expert, independent from manufacturing: Acceptance certificate 3.1 to DIN 10204, P/N 400008844 Certificate of linearity test: Linearity record P/N 400009988

DIN Cells (Low Maintenance) Bolted 198mm wide

Work thread – Hose clamp DIN 3017, Form A with hexagon head screws SW 7 S

Differentiation between DIN / EN and ANSI Eyeglass blinds according to DIN differ from eyeglass blinds according to ANSI in terms of pressure levels, sealing strips and materials. In German-speaking countries, glasses blind disks are also called blind disks or throttle disks. However, the English terms “spectacle blind”, “blind paddle” are also often used in Germany. Pressure levels according to DIN / EN The following pressure levels for blanking disks according to DIN are available PN 6, 10, 16, 25, 40, 63, 100, 120, 160 and 250. Sealing strips The following shapes are available for sealing strips: A, B1, B2, C, D, E, G and H. Materials The steel materials P 265 GH and P 355 NL are available. In the stainless steel area, the materials 1.4541, 1.4571 and 1.4307 are possible.

Disc Springs are conically-shaped precision components designed to be axially loaded. Disc Springs are often incorrectly referred to as belleville disc springs, belleville springs, belleville washers or simply conical washers. SPIROL offers the full range of DIN EN 16983 (formerly DIN 2093) Group 1 and 2 Disc Springs in Series A, B, and C. In addition to the DIN specified sizes, SPIROL stocks its own standard sizes with outside diameters ranging from Ø8mm to Ø200mm. SPIROL Standard Disc Springs were designed around the standardized calculations of DIN EN 16984 (formerly DIN 2092), and meet all material, dimensional tolerance, and quality specifications as laid out in DIN EN 16983 (formerly DIN 2093) yet offer an expansion in the diameter and thickness combinations that are not included in the DIN standard. Standard materials include carbon steel and alloy steel, both finished with a protective coating of zinc phosphate and oil.