Compressed-air systems - Import export

The »speedfit« compressed air piping system is characterised by its simple and fast installation and it is ideally suited for conveying compressed air and liquids. It is installed without tools and the connections can be quickly fastened and released with additional sealing material not required. The »speedfit« compressed air piping system is fabricated according to BSX 5750 Part I, ISO 9001, EN 29001. The good flow properties and large range of products characterise this system. Plastic pipes, aluminium pipes, air distributor sockets, pipe clamps, water separators, loosening assists, brass connectors, protective caps and retaining rings are included in the »speedfit« series.

Compressed air preparation helps to prevent malfunctions on pneumatic components and increases their service life. Machine failures and downtimes are reduced. Whether compressed air preparation, regulation or cleaning, we have multi-part service units, from pressure regulators, filter controllers, oilers, condensate diverters and oil-water separators to system expansions and various accessories as well.

Compressed air preparation helps to prevent malfunctions on pneumatic components and increases their service life. Machine failures and downtimes are reduced. Whether compressed air preparation, regulation or cleaning, we have multi-part service units, from pressure regulators, filter controllers, oilers, condensate diverters and oil-water separators to system expansions and various accessories as well.

The »speedfit« and »sharkbite« line systems are ideally suited to transporting compressed air. Both can be installed quickly and easily by you and offer, compared to conventional methods, significant labour and energy savings. Convert your compressed air piping systems with minimal production downtime and cost. Plastic pipes, aluminium pipes, air distribution socket, pipe clamps, water separators, loosening assists, brass connectors, POM/PP connectors, protective caps and retaining rings comprise this range. Both are durable and corrosion-resistant, and no additional sealing material is required for their installation. You get optimum flow rate and the utmost air quality. You also extend the lifespan of your systems and installations.

Quick-connect couplings consist of two components – coupling socket and plug. They are the ideal interface to connect or disconnect the flow of gaseous or liquid media in lines safely and quickly. Quick-connect couplings are used for the conveyance of air, water, oil, acids or various gases. Here you will find single-sided and double-sided blocking quick connect couplings up to I.D. 19, asymmetrical couplings in different sizes and hydraulic couplings standardised to ISO. Our safety couplings are available in swivel, rotating and push button design and in combination with sliding valve and quick connect coupling. RIEGLER couplings are available with a flow of up to 8700 l/min and in EURO, ARO210 and ISO 6150 C plug profiles. The range of materials goes from bright and nickel-plated brass to different variants of stainless steel up to aluminium, plastic, steel and zinc die casting.

The »speedfit« and »sharkbite« line systems are ideally suited to transporting compressed air. Both can be installed quickly and easily by you and offer, compared to conventional methods, significant labour and energy savings. Convert your compressed air piping systems with minimal production downtime and cost. Plastic pipes, aluminium pipes, air distribution socket, pipe clamps, water separators, loosening assists, brass connectors, POM/PP connectors, protective caps and retaining rings comprise this range. Both are durable and corrosion-resistant, and no additional sealing material is required for their installation. You get optimum flow rate and the utmost air quality. You also extend the lifespan of your systems and installations.

The »speedfit« compressed air piping system is characterised by its simple and fast installation and it is ideally suited for conveying compressed air and liquids. It is installed without tools and the connections can be quickly fastened and released with additional sealing material not required. The »speedfit« compressed air piping system is fabricated according to BSX 5750 Part I, ISO 9001, EN 29001. The good flow properties and large range of products characterise this system. Plastic pipes, aluminium pipes, air distributor sockets, pipe clamps, water separators, loosening assists, brass connectors, protective caps and retaining rings are included in the »speedfit« series.

- Whitworth pipe thread- VS seal rings - Seals in connectors NBR - Material brass nickel-plated - Temperature range -4 to 158 °F (-20 to +70 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)

- Whitworth pipe thread- Chambered O-ring - Seals NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, not designed for steady motion of the tube - Not designed for steady motion of the tube

- Whitworth pipe thread - Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling - but not designed for steady motion of the tube

- Whitworth pipe thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread - Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)

— Metric thread with hexagon socket — Chambered O-ring — Sealing NBR — Material brass nickel-plated — Temperature range -4 to 176 °F (-20 to +80 °C) — Working pressure range -14 to 232 psi (-0.95 to 16 bar)

- Whitworth pipe thread with hexagon socket - Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- with shut-off valve - M5 thread - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range 0 to 232 psi (0 to 16 bar)

— Whitworth pipe thread- Chambered O-ring — Sealing NBR — Material brass nickel-plated — Temperature range -4 to 176 °F (-20 to +80 °C) — Working pressure range -14 to 232 psi (-0.95 to 16 bar)

- Whitworth pipe thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- R-thread - Whitworth pipe thread conical - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)

- Made of polyamide (PA) - Color black (red, blue, green, yellow, natural, brown, orange and grey: specify when placing order; subject to extra charge) - External calibration; for use with Eisele plug connectors - Temperature range -76 to 212 °F (-60 to +100 °C) - Suitable for vacuum - Free of PWIS and halogen - Suitable for fuel - For automotive industry according to DIN 73378 - Drag chain compliant