Compressed-air systems - Import export

Compressed air preparation helps to prevent malfunctions on pneumatic components and increases their service life. Machine failures and downtimes are reduced. Whether compressed air preparation, regulation or cleaning, we have multi-part service units, from pressure regulators, filter controllers, oilers, condensate diverters and oil-water separators to system expansions and various accessories as well.

The »speedfit« compressed air piping system is characterised by its simple and fast installation and it is ideally suited for conveying compressed air and liquids. It is installed without tools and the connections can be quickly fastened and released with additional sealing material not required. The »speedfit« compressed air piping system is fabricated according to BSX 5750 Part I, ISO 9001, EN 29001. The good flow properties and large range of products characterise this system. Plastic pipes, aluminium pipes, air distributor sockets, pipe clamps, water separators, loosening assists, brass connectors, protective caps and retaining rings are included in the »speedfit« series.

Compressed air preparation helps to prevent malfunctions on pneumatic components and increases their service life. Machine failures and downtimes are reduced. Whether compressed air preparation, regulation or cleaning, we have multi-part service units, from pressure regulators, filter controllers, oilers, condensate diverters and oil-water separators to system expansions and various accessories as well.

The »speedfit« and »sharkbite« line systems are ideally suited to transporting compressed air. Both can be installed quickly and easily by you and offer, compared to conventional methods, significant labour and energy savings. Convert your compressed air piping systems with minimal production downtime and cost. Plastic pipes, aluminium pipes, air distribution socket, pipe clamps, water separators, loosening assists, brass connectors, POM/PP connectors, protective caps and retaining rings comprise this range. Both are durable and corrosion-resistant, and no additional sealing material is required for their installation. You get optimum flow rate and the utmost air quality. You also extend the lifespan of your systems and installations.

Quick-connect couplings consist of two components – coupling socket and plug. They are the ideal interface to connect or disconnect the flow of gaseous or liquid media in lines safely and quickly. Quick-connect couplings are used for the conveyance of air, water, oil, acids or various gases. Here you will find single-sided and double-sided blocking quick connect couplings up to I.D. 19, asymmetrical couplings in different sizes and hydraulic couplings standardised to ISO. Our safety couplings are available in swivel, rotating and push button design and in combination with sliding valve and quick connect coupling. RIEGLER couplings are available with a flow of up to 8700 l/min and in EURO, ARO210 and ISO 6150 C plug profiles. The range of materials goes from bright and nickel-plated brass to different variants of stainless steel up to aluminium, plastic, steel and zinc die casting.

The »speedfit« and »sharkbite« line systems are ideally suited to transporting compressed air. Both can be installed quickly and easily by you and offer, compared to conventional methods, significant labour and energy savings. Convert your compressed air piping systems with minimal production downtime and cost. Plastic pipes, aluminium pipes, air distribution socket, pipe clamps, water separators, loosening assists, brass connectors, POM/PP connectors, protective caps and retaining rings comprise this range. Both are durable and corrosion-resistant, and no additional sealing material is required for their installation. You get optimum flow rate and the utmost air quality. You also extend the lifespan of your systems and installations.

The »speedfit« compressed air piping system is characterised by its simple and fast installation and it is ideally suited for conveying compressed air and liquids. It is installed without tools and the connections can be quickly fastened and released with additional sealing material not required. The »speedfit« compressed air piping system is fabricated according to BSX 5750 Part I, ISO 9001, EN 29001. The good flow properties and large range of products characterise this system. Plastic pipes, aluminium pipes, air distributor sockets, pipe clamps, water separators, loosening assists, brass connectors, protective caps and retaining rings are included in the »speedfit« series.

It is a machine that works with a fully compressed air system and is used to turn wheat coming from the cleaning unit into flour in flour factories. The chassis is made of sheet metal construction, and the sub-chassis is completely scanned on the borvek bench to ensure the parallelism of the balls. Rubber wicks are placed under the bed slides to absorb vibration. The properties of the rollers installed on the machine vary according to the diagram and are determined according to the purpose of obtaining the desired flour yield from the factory. All controls on the machine are made with the help of air stimulated valves and there is no electricity consumption. Depending on the amount of incoming product, the valves are stimulated, the pistons close and the grain balls come into action. Thanks to the plate on the grain rolls, the amount of product can be adjusted and flow is provided

It is a machine that works with a fully compressed air system and is used to turn wheat coming from the cleaning unit into flour in flour factories. The chassis is made of sheet metal construction, and the sub-chassis is completely scanned on the borvek bench to ensure the parallelism of the balls. Rubber wicks are placed under the bed slides to absorb vibration. The properties of the rollers installed on the machine vary according to the diagram and are determined according to the purpose of obtaining the desired flour yield from the factory. All controls on the machine are made with the help of air stimulated valves and there is no electricity consumption. Depending on the amount of incoming product, the valves are stimulated, the pistons close and the grain balls come into action. Thanks to the plate on the grain rolls, the amount of product can be adjusted and flow is provided as a curtain between the roll rolls.

It is a machine that works with a fully compressed air system and is used to turn wheat coming from the cleaning unit into flour in flour factories. The chassis is made of sheet metal construction, and the sub-chassis is completely scanned on the borvek bench to ensure the parallelism of the balls. Rubber wicks are placed under the bed slides to absorb vibration. The properties of the rollers installed on the machine vary according to the diagram and are determined according to the purpose of obtaining the desired flour yield from the factory. All controls on the machine are made with the help of air stimulated valves and there is no electricity consumption. Depending on the amount of incoming product, the valves are stimulated, the pistons

Hi-Tec Shut-Off Impulse Tool. The lightweight Yokota YLT series impulse wrenches with double chamber air motor achieve the required torque very quickly. The tools have a high number of impulses per second, and therefore very accurate torques can be realised, resulting in increased production speed. Design innovation and the application of new materials significantly reduce the weight and increase the service intervals. Yokota impulse wrenches are widely used for tightening jobs in the assembly industry, where accurate torque tolerances are necessary. Impulse tools are light, powerful, small and very importantly, have no kick-back. Evaluation of tightening processes in car assembly shows that tightening joints uses 10% of the total assembly time. Working with faster tools therefore can speed up assembly lines substantially. [...]

Hi-Tech Impulse Tool with Double Chamber Air Motor. The lightweight Yokota YLa series impulse wrenches with double chamber air motor achieve the required torque very quickly. The tools have a high number of impulses per second, and therefore very accurate torques can be realised, resulting in increased production speed. Design innovation and the application of new materials significantly reduce the weight and increase the service intervals. Yokota impulse wrenches are widely used for tightening jobs in the assembly industry, where accurate torque tolerances are necessary. Impulse tools are light, powerful, small and very importantly, have no kick-back. Evaluation of tightening processes in car assembly shows that tightening joints uses 10% of the total assembly time. Working with faster tools therefore can speed up assembly lines substantially. [...]

Poppe + Potthoff Maschinenbau GmbH supplies compressor units and pressure control systems of up to 400 bar for various gases. We offer ready-to-connect units to increase the existing pressure for pneumatic and hydraulic applications. In this way, the performance of existing systems can be increased flexibly and efficiently. Our compressor units are used wherever the existing system pressure is insufficient to implement specific applications. Of course, our systems are UL or CE compliant as required. In addition, we offer you service and support directly on-site.

The generation of compressed air is always connected with the formation of condensate. In most cases, this condensate contains oil, is contaminated with dirt particles and spreads out in the entire compressed-air system. A system problem which can result in damage and additional costs. The BEKOMAT drains condensate in the compressed-air system in an electronically level-controlled manner. More than 3,000,000 installations worldwide make it the industrial standard for reliable and cost-effective condensate drainage.

In addition to filtration, compressed-air drying contributes significantly to an increase in process reliability. Humidity in compressed-air systems causes corrosion, and promotes the growth of micro-organisms. In individual cases, condensate emerges at the point of use - an ongoing danger for the operational flow, for example because of failing pneumatic controls, increased wear and tear or because of other disturbances in the production process. With considerably enhanced process reliability, the DRYPOINT dryer technology offers decisive advantages for every field of application. The BEKO TECHNOLOGIES portfolio comprises application-optimised refrigeration, adsorption and membrane dryers for volumes up to 1,500 m³/h. This range of dryers is completed by heat-regenerated EVERDRY adsorption dryers which are designed for large volume flows up to 20,000 m³/h.

The energy costs of a compressed-air system are decisively influenced by the pressure drop occurring during compressed-air filtration. To maintain the required operating pressure, this pressure drop needs to be compensated by correspondingly higher compressor performance. The consequence: increased energy demand, premature wear of the compressor ... and therefore higher costs. The better solution: CLEARPOINT compressed-air filters by BEKO TECHNOLOGIES.

The key to the successful optimisation of compressed-air systems is data. The METPOINT® range of measurement equipment with sensor technology and monitoring provides the data base for the evaluation and assurance of the compressed-air quality and for the identification of hidden cost drivers. Our measurement equipment can also be employed for the extension of plants and for the early elimination of malfunctions. With our sensor technology, you can capture residual oil content, residual humidity, volume flow and pressure – constantly, faultlessly and with exemplary precision. Our Monitoring and Data Logging makes all the relevant data accessible to you and your employees at a glance, ensuring the safety of your processes and the quality of your products. In this way you can take your energy management and quality control requirements to the next level of success.

Category Compressed-air technology / Plug-in connector systems for air brake systems / Raufoss / Elbow 90° / Bulkhead fittings Product number supplier 321366

PNEUMATIC CENTERING DEVICE WITH MOTORIZED ROLLERS (MOD. CP-FM) MANUFACTURERS VERSION Feeder - centering device useful for centering boxes max width mm. 650 and max weight kg. 50. Can be combined with automatic taping and labeling machines. The box centering machine mod. CP-FM consists of a motorized roller conveyor and two pneumatically operated side guides. The metal parts are painted with epoxy powder while the other components are galvanized. The pneumatic centering device with motorized rollers is a module for builders to be completed and adapted to an automatic line. It is available in two versions: Manufacturers version and "plug and play" version: In the "manufacturers" version, the centering device is supplied complete with: - Motorized roller conveyor with start and stop button and emergency mushroom, at a fixed speed of 15 meters / minute - Pneumatic tail lifts and compressed air system up to the gate movement management valve.

New model for professional use with use of hot melt adhesives granulated or stick diam. 43 mm. and manual advancement (there is no need compressed air). The fusion system in closed tank allows to have in a few seconds a large amount of molten adhesive to a fast dispensing. The temperature is regulated by thermostat at bimetal strip, which ensures a particular strength and wear resistance. It also has a magnetic base that allows you to place it on metal surfaces. Available models: MS 200-TER: model with temperature regulation with thermostat MS 200-LCD: model with temperature adjustment by LCD display

FireFox® 2 C – With setting process monitoring This tool is based on the proven TAURUS® C model. Here the setting process is analysed via integrated electronics using stroke and force sensors. The user can defi ne an OK window by means of a special software. A coloured LED on the tool shows the results of the setting process monitoring which can also be recorded and processed via data line. Apllications In the serial production of safety component parts as well as in automated setting processes the FireFox® C allows checking and documentation of the setting process. Advantages • High process safety • Documentation of each individual setting process • Less scrap since errors can be immediately identifi ed

Working range Blind rivet nuts from M3 up to M10 all materials as well as M12 in aluminium and steel Technical data Weight: 2.4 kg Adjustable stroke,max: 10mm Adjustable traction force, max: 18,5 kN at 5 bar Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 2 to 4 ltr. per rivet nut (depending on nut size) Scope of delivery 2 double open ended wrenches SW 24/27 1 hexagon screw driver SW 4 1 oil refi ll can with hydraulic oil 100 ml 1 oil refi ll can Operating instructions with spare parts list

Working range Blind rivets from M3 up to M6 of all materials, except M6 stainless steel Technical data Weight: 1.96 kg Maximum stroke: approx. 7,5 mm Adjustable traction force: up to approx. 10,5 kN at 5 bar Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 1 - 2 ltr. per setting process (depending on nutsize) Scope of delivery 2 double open ended wrenches SW 24/27 1 hexagon screw driver SW 4 1 oil refi ll bottle with hydraulic oil 100 ml 1 oil refi ll can operating instructions with spare parts list Rubber foot Quick setting guide

Working range Sets blind rivets up to 6.4 mm Ø all materials (max. mandrel dia. 4.5 mm) Technical data Weight: 1.9 kg Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 4.8 ltr. per rivet Traction power: 18.000 N at 6 bar Stroke: 25 mm Equipment Nosepieces:17/36, 17/40 and 17/45, maintenance wrench SW12/14, SW14/17, 1 hydraulic oil bottle 100 ml, 1 oil refi ll can, Operating instructions with spare parts list

Working range Sets blind rivets from 2.4 up to 3.2 mm Ø all materials and up to 4 mm Ø alu/steel (max. mandrel dia. 2.5 mm) Technical data Weight: 1.3 kg Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 1,0 ltr. per rivet Traction power: 5500 N at 6 bar Stroke: 15 mm Equipment Nosepieces:17/18, 17/24 and 17/27, maintenance wrench SW12/14, SW14/17, 1 hydraulic oil bottle 100 ml, 1 oil refi ll can, operating instructions with spare parts list

The FireFox® 2 can be optionally controlled via the stroke or setting force setting. Advantages • Fast and precise setting force adjustment with colour-coded setting ring (1) • New stroke scale quick and easy to set even under poor light conditions • Maximum stroke clearly identified by blue ring on stroke scale (2) • Throttle plate: Automatic throttle for even faster and protective setting as from M3 blind rivet nuts • PTFE (Teflon®) seal. PTFE seal and optimised pilot holes improve the service life of the slide valve Working range Sets blind rivet nuts from M3 to M10 in all materials as well as M12 in aluminium and steel. Technical data Weight: 2.4 kg Adjustable stroke,max: 10mm Adjustable traction force, max: 22 kN at 6 bar Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 2 to 4 ltr. perrivet nut

The FireFox® 1 F Axial eco is ideally suited for integration in production systems and facilitates flexible and ergonomically efficient manual working procedures in applications with restricted access and therefore require riveting from above. Advantages • Costs-effective entry model • Ideally suited for instillation in assembly cells, fixtures or semi-automatic workstations • Handy for processing blind rivet nuts in places that require vertical riveting action • Can be attached to a balancer Working range Sets blind rivet nuts from M3 to M6 (M12) in all materials except M6 (M12) stainless steel. Technical data Weight: 2.8 (3.3) kg Max. setting stroke approx. 7.5 (10) mm Max. setting force, adjustable: approx. 12 (22) kN at 6 bar Operating pressure: 5-7 bar Hose connection: 6 mm Ø (1/4’’) Compressed air consumption: max. 2 (4) l per setting

With the GESIPA® FireRex® it is possible for the first time to set huge numbers of blind rivet nuts fast and fully automatically. Since neither a camera nor any kind of optical device, which are usually dust-prone, are necessary to find the drilled hole, the system allows stable operation even in adverse production environments without requiring huge maintenance efforts. The setting tool can also be integrated into already existing production systems without a problem, thus allowing to make the systems more economical. Also available as FireRex® 2 C WinTech with setting process monitoring.

Blind rivet nuts from M3 up to M10 all materials Technical data Weight: 2.3 kg Operating air pressure: 6 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: ca. 8 ltr. per riveting process Traction power: 15,700 N (1,600 kp) Stroke: 7 mm Features • Patented, drill-in and out system for threaded mandrels – time saving • The compressed air used for the setting process is then used to automatically drill off the threaded mandrel – effi ciently • Simple stroke setting – safe and complete setting of the blind rivet nuts • Setting process: Hydraulic in an axial stroke action – no twisting or turning of the blind rivet nuts and no damage to the surface • Easy one-hand operation – rational and fatigue-proof • Pneumatic locking of threaded mandrel – fast change without tools • Hydraulic head; aluminium with wear-proof cylinder surface • Pneumatic cylinder: aluminium with impactresistance plastic sheath