Clamping tools - Import export

Double-acting pneumatic cylinder for integrated installation in clamping tools.

Mount tools safely and in the correct position while remaining flexible, all this is possible with the UMB100 mounting unit. The tool clamping units can be changed quickly, making the system an ideal mounting aid for multi-tasking machines. It only takes a few seconds to replace an adapter. The unit with snap-in swivel can be pivoted 4 x 90° at the touch of a button so that even angled holders can always be mounted in the ideal position. Universal mounting block UMB100 Tool holder for VDI holding fixtures Tool holder for Varia VX Tool holder for steep-angle taper holding fixtures

The rapid change system EWS-Varia allows to set-up a modern CNC lathe or a turning milling center – and this flexibly. A tool change will just take 20 seconds, which is an unbeatable argument especially in small batch productions whenever it is about reducing the set-up time and thus increasing the productivity. The advantages, however, are also evident in large batch productions. Preset twin tools lie at the machine, thus significantly reducing the down-times. A further advantage is provided by the variety of adaptations; so the optimal tool clamping can be selected for each operation. The inserts available include: Collet chuck holders Weldon/Whistle Notch Milling arbors Morse tapers Hydro extension Shrink adaptations The most important advantage is certainly created by the easy handling. The inserts can be changed with just one hand without counter pressure by the spindle.

Driven tools form a further core area of EWS. More than 8,000 different tools are available at short notice. In addition to standard products like axial and angular heads, EWS offers swivel units, slot broaching tools, multiform tools and multi-spindle machines. There is just no limit. The tool clamping systems range from the classic collet chuck holder to Weldon and hydro extension to Capto, KM, ABS and HSK. The applications range from classic CNC lathes to highly complex turning milling centers. The rapid change system EWS-Varia has set a standard for a flexible modular system. With its safe handling and short change-over times, EWS-Varia ranks among the most successful systems in the market. This was impressively confirmed by the Innovation Award awarded by the German state of Baden-Württemberg in 2006. "Made in Germany" is of course guaranteed by EWS also for these tool systems.

Motor shafts. Gear and frive unit shafts. Fan shafts. Clamping tools. Applications at high speed and lo pressure.

Hand piece ESB 3-50 (Basic) ***SE 50 Silent Grinder *** The new micro grinder with electric mickro-motor from BIAX - lightweight, low Vibration, extremly low noise! Technical data of hand Piece: Diameter: max. Ø 30 mm Length: 165 mm Weight without cable: 240 gr Run-out accuracy: < 0,02 mm Collets diameter: 3,0 mm (standard) / 2,35 mm (optional) Tool changing: Quick clamping Cooling: Enclosed (all models) Drive system: Brushless DC motor (all models) Technical Data: Speed range: 1.000 - 50.000 rpm Operating Voltage: 100 - 240 Volts Rated frequency: 50/60 Hz Power: 150 Watts Overload protection: Eliminates waiting time when switching back on Direction of Rotation: Switch between clockwise and anti-clockwise rotation

HAND-Demagnetizers be used for degaussing of large parts or workpieces, which cannot be done to the device for other reasons, for example, Injection molds, stamping tools, vices built, clamped tools, etc. This portable model can be used for a maximum of 10 minutes of continuous operation. It is equipped with a thermostat that switches it off when the maximum permitted temperature (60ºC) is reached; it can only be used again once the temperature has dropped. The device is moved by hand over the workpiece, as close as possible to the surface, but without touching it.

Standard clamping technology from AMF: versatile, durable, reliable. The highest level of quality applies to this exceptional versatility as well. Every product meets the demand for innovation and the specific requirements within the scope of practical application.

Zero-point clamping technology from AMF: economical, strong, precise. The Zero-point system from AMF has virtually revolutionised the zero-point clamping technology market with technological superiority. The highly precise clamping modules with high draw-in, locking and holding forces ensure perfect clamping in the widest range of applications.

Toggle clamps from AMF: versatile, strong, durable. Tried-and-tested technology with ever new variants. The benefits of our toggle clamps are highly valued in many fields of application: in the metal industry for drilling, welding, bending, grinding, checking and mounting as well as for the machining of wood and plastic in gluing, drilling, cutting and milling fixtures.

This development represents more than 30 years of SPANNTOP experience. It exploits all the advantages of the latest machine tools. This clamping head is not only extremely powerful, it is also convincing through simple handling. With the changing fixture you set up in no time. The combination of steel and rubber, specially developed by HAINBUCH, in conjunction with a vulcanization that has been perfected over decades, is designed for maximum speed and holding force – with optimal concentricity, and incredible rigidity and service life.

The KKF4-SL, a universal chamfering and contour milling machine, has an ER collet chuck. Tools with a shaft diameter from Ø6-12 mm can be clamped. Our versatile tool range includes different VHM milling cutters and blade heads. The VHM milling cutters are available for the processing of chamfer angles and radii. Ball bearings with Ø6 or Ø8mm are used for contour processing with the VHM milling cutters. Tapered contour chamfers are used in combination with guide fingers or stop rulers. The use of cutter heads with cutting inserts and guide ball bearings starting at Ø10mm permit maximum efficiency. A guide prism with VHM shaft chamfering can be used for straight edges. The exact chamfer setting is performed through a micrometer screw. A chamfer width of up to 4mm at 45° is possible in steel. In NE metals, significantly larger chamfers are possible depending on the tool and angle. The KKF4-SL has speed regulation that is very useful for the processing of aluminum or stainless steel.