Automation control - Import export

In automation engineering, digital Controllers are used to set and stabilize the variable processes for the users pre-defined values

In automation engineering, digital Controllers are used to set and stabilize the variable processes for the users pre-defined values

SYSTEM SOLUTIONS FOR THE STORAGE OF CEREAL PASTE AND SUGAR BEET Lipp plans and sells storage systems for biomass such as cereal paste or sugar beet under the brand names LIGAVATOR and BETAVATOR. These systems are generally gas tight and both roof and container base (optional) are made of solid stainless steel, since the stored media can give rise to very aggressive juices and gases. With this type of storage the substances are preserved and can be used over a very long period. Automatic withdrawal and substrate delivery can also be installed in the following systems by an appropriate control system. APPLICATION EXAMPLES AND REFERENCES In addition to pure crop storage, the Lipp LIGAVATOR / BETAVATOR systems are mainly used as substrate storage for agricultural or industrial biogas plants, and are installed before the fermenter for appropriate substrate supply. They allow largely automated control of a biogas plant, as there is no need for a regular manual substrate supply.

Dosing systems DOS: Perfectly controlled oil feed rates Thanks to automated control of the oil feed rate DOS series dosing systems offer the highest levels of efficiency and flexibility in your lubrication processes – and it does not matter if continuous lubrication is desired or just a single drop is required. The machine cycle time determines the interval at which the lubrication valves open. The following DOS dosing systems are available from us: DOS 10 MR, DOS 10 MR H: system for pneumatically operated roller lubricators WF 60 WG, WF 110 WG, WF 110 MOT. Optionally available with poppet valve DOS 40: reservoir and control unit are separate. Also available for squeeze-on lubricators, but without pressure vessel (replacement: VB 10). DOS S: version for sector lubrication; in this case the oil feed for each roller can be programmed separately (via PLC). Other configurations include, amongst others, an extension to facilitate oil supply directly from an oil drum or an option to operate

High-tech system for maximum process reliability. Automatic nozzle SDA 30: high-tech system for maximum process reliability The SDA 30 is an integrated system consisting of a nozzle and a control module. The nozzle is equipped with a Hall sensor that monitors and controls the position of the nozzle needle. All operational settings/adjustments (oil rate and so forth) are automated via the controller of the proprietary Eckardt control unit. This makes it possible to control up to four nozzles at the same time.

Precise, reliable measurements of both static and dynamic torques in either direction can be made with this range of sensors. This opens a wide range of possible applications to the user. These torque sensors are standard equipment in a wide range of industrial automation, quality control and automotive components industry applications, as well as in laboratories. Typical applications: Screwing technology — Checking and adjusting bolting tools such as torque limiting wrenches, screwdrivers — Testing bolted connections Measuring the drag torque of motors and pumps — Frictional torques of gears, bearings and seals — Testing torsion springs — Adjusting equipment in the automobile industry (sunroof, power windows etc.) Strain gauges are mounted on the torsion shaft of the sensor element, itself made of steel, connected to form a full bridge.

Big 3: Performance, Plug-In ® label and Quality Check Inside - more customer benefits for future requirements The weigh price labeller GLM-Ievo intelligently designed for automatic weighing and labelling of pre-packaged goods comes in different versions. The Weigh Price Goods Labelling System GLM-Ievo 170 will achieve over 170 packs per minute. Due to its modular design, it can be optimally configured for alternative products and offers exemplary performance requirements in the food production area. Thanks to the modular system of the weigh price labeller, there are no limits for todays and any future requirements you may have in the industrial food area. Besides its flexibility, this labelling system stands out in terms of robustness and an easy-to-clean design. With intelligent visual quality control and automated activation of process data via the new function Plug-In® Label operation it is easy to maintain and manage thereby reducing errors during the packaging...

RetailImpact is the versatile multimedia sales assistant for more customer loyalty. Bundled benefit for you and your customers: Product knowledge, advertising and price information in real time. Targeted information, up-to-date, automated and controlled centrally. Product knowledge, advertisement, advice and more. Offering a unique shopping experience and increasing operating efficiency at the same time. RetailImpact permits controlling of the demand as well as improving customer loyalty and brand differentiation. In a few steps, product, advertisement and cross selling information is provided for scale displays and external displays - based on content and optically customized to your offer. Via RetailImpact advertising and consumer information can be managed and directly assigned to several scale displays or screens from the back office. You increase the advisory service of your staff by providing information, recipes, preparation instructions or allergen information. They are...

The GEMÜ 1436 cPos is a digital electro-pneumatic positioner with optionally integrated process controller for the control of pneumatically operated process valves. When using the optional process controller the signals from a process sensor (e.g. flow, level, pressure, temperature) are detected and the media adjusted according to the specified set value. The positioner has a solid housing with protected operating buttons and a LC display. —Digital inputs (option) for variable function control for automation —Fieldbus interfaces e.g. Profibus DP, DeviceNet (option) —No air consumption when idle —Simple mounting to various valve actuators —Access rights via different user levels

Pole reversal controllers from the FXL-C family reliably control not only our FXL magnetic chucks, but almost all electro-permanent magnet systems on the market. Input voltages of 100-500 VAC / 50-60Hz and matching modulated, pulsed output voltages and pulse powers of up to 24 kVA are unique key data, which are only required under extreme conditions, but provide maximum stability in normal use. FXL-C is available from simple, handy table-top units to control cabinet versions for large-scale applications; stand-alone from manually operated, part-connected with feedback to the machine up to full integration into the machine control for automated applications.

FTIR Excellence for Industry, R&D and Science: INVENIO INVENIO is the definitive spectroscopic solution for routine FTIR analysis as well as research and development. It is all you need and so much more: innovative technologies, intelligent design and its new beam path contribute to an unrivalled user experience. Your advantage: •Outstanding signal-to-noise ratio •Broad spectral range (FIR, MIR, NIR and VIS/UV) •Touch-PC with dedicated software for enhanced productivity •MultiTect™: Up to seven automated and software controlled internal detectors •Transit™: parallel availability of two experimental setups •RockSolid™: reliable, well-proven and precise •CenterGlow™ IR source: optimized light flux and durability •Bruker FM: MIR and FIR spectra in one go •Upgradability: retrofit spectral range extensions or time resolved measurements •Multiple beam inputs and outputs •Compact footprint optimized for laboratory benches

The SmartMeth™ control system is a fully automated nitrogen methanol mixing system for heat treating furnace atmosphere production. The SmartMeth™ utilizes the latest in precision differential pressure flow measurement and touch screen controller design. This first of its kind system with built-in flow rate calculation automatically sets the nitrogen and methanol flow rates based on a desired %CO furnace concentration. FEATURES & BENEFITS • Automatic flow set point calculation - calculates the required nitrogen and methanol flow rates to maintain a desired %CO at the required volume • Customizable recipe software • Optional integrated carbon and temperature control • Automatic atmosphere recovery provides additional synthetic gas flow on demand, when introducing a new load into the furnace • Integrated paperless chart recorder stores furnace temperature, %carbon, and synthetic gas flow furnace details • Completely assembled and tested to NFPA 86 safety guidelines

Manual weighing by Servolift, either connected to a lifting function or for vertical product flows, is highly flexible and easy to handle due to modular construction. The weighing system, the size of the weighing funnel, the lifting system, etc. are all specially adapted to customer specific requirements in a trouble-free way. Technical description A large load range Exchangeable weighing funnels with various volumes Dust exhaust can be integrated Operating sequences from simple and manual to fully-automated systems Various control designs, such as simple weighing to recipe-guided systems connected to an ERP system. Low-dust design up to high-containment solutions

The ENCODER machine series was specifically developed for integration in all kinds of automated systems. Variable control possibilities: For the EP series we offer three different electronic control possibilities. Variable installation positions: The ENCODER EP/1 models, equipped with a piston on the ink/ doctoring cup and adequate overhead control, guarantee all print positions. Fitted with the ENCODER aluminium stand, the ENCODER EP/1 have a free choice of positioning within 360° and the distance to the printing component can be additionally adjusted with a handwheel.

Paints and coatings, sealing and insulating materials, coatings, chocolate masses, dairy products, personal care and many other products are produced on process systems from our company. The efficiency and effectiveness of your manufacturing processes can be significantly increased with the help of individually built process plants. Customized process plants are used by our customers worldwide. Container systems, which can be used flexibly at different locations, are available as well as our skidded units, which are completely frame-mounted and automated production units. Recipe control, visualization, weighing, measurement and control technology, containers and piping, CIP systems - all plants are completely assembled in our factory. After a test run under production conditions they are accepted by you. Our technicians are available to you on site for installation, commissioning and service.

"The main customers of our MDLab are universities, institutes and companies who conduct research and practical studies on membrane distillation. This highly precise laboratory set up is fully automatic and suitable for the investigation of all aspects of the membrane distillation process as well as material research e.g. on membranes. The MDLab is equipped with a flexible test cell, which can encompass any MD channel configuration or material sample. Our MDLab system can be visited in Freiburg on appointment for a full demonstration. Technical information: 120 cm x 140 cm x 85 cm Fully automated Tablet controlled (Terra tablet included) Customizable according to specific rquirements All MD channel configurations possible Suitable for continuous operation Power supply required"

These magnets can be individually adjusted to different tasks. They are only switched on with a short compressed air impulse between 5 and 8 bar. They are low-maintenance and have very fast switch-on times. Individual solutions with multiple parallel-controlled magnets simplify your lifting task or work process. It is not just used in fully automatic systems, but rather also for the simples manual lifting processes.

These magnets can be individually adjusted to different tasks. They are only switched on with a short compressed air impulse between 5 and 8 bar. They are low-maintenance and have very fast switch-on times. Individual solutions with multiple parallel-controlled magnets simplify your lifting task or work process. It is not just used in fully automatic systems, but rather also for the simples manual lifting processes.