Air connections - Import export

Stop valves for shutting off and locking in the event of an unintentional drop in pressure. Pneumatically unlockable, for direct installation in the cylinder air connection.

Accessory Profile KP09P: Pneumatic clamping plate for shaft clamping Selectable sizes of the compressed-air connection Easy mounting and retrofitting

Accessory Profile KP09: KP09 for shaft diameters 8–20 mm Selectable sizes of the compressed-air connection Easy mounting and retrofitting

Pneumatic cylinders according to the norm, standard or special design, completely configured ready for installation and pre-assembled with add-on parts, bearing elements, compressed air connections, position sensors or control valves according to customer specifications.

Solenoid valves for direct mounting on the pneumatic actuator or cylinder. Cylinder and valve become a compact unit thanks to simple installation in the air connection. Available in sizes 1/8 and 1/4 and with all common solenoid voltages. With manual override.

Elbows and connections made of steel and stainless steel for oil, gasoline and air hose lines. The connections are pressed onto the assembled hose.

Quick exhaust valves made of nickel-plated brass. For quick bleeding of cylinders and systems. On request also fully assembled with hose connections and exhaust air silencer. Available in sizes M5 – 1/2

The DD 206 and DD 206 (A) discharging nozzles are flow-optimised. A greater electrostatic discharge reach and cleaning effect on the material to be discharged may be achieved with the additional support of compressed air. Air connection is provided via a G1/4” female thread.

Discover another effective helper for improving workplace ergonomics - the positioner. It represents a particularly innovative development in the field of spring balancers and balancers. The positioner is a device specially designed for the flexible provision and height-variable positioning of supply units. These include, for example, compressed air, water, mains connections and the power supply. The side adjustment screw allows you to adjust the appropriate braking force at any time and to use the positioner safely. A practical invention that minimizes the risk of injury and makes handling much easier. A great feature of the positioner is that the desired position is kept safe and reliable even when the load changes.

Flat contact face design reduces spill upon disconnection by less than half compared with that of conventional design. Flat contact face design makes it easy to clean dust and foreign matters adhered on the surface of coupling so as to prevent them from entering inside and thus causing faulty operation of connection or disconnection. Flat contact face design minimizes air admixture during connection to keep the possible malfunction of equipment caused by the air bubbles in the hydraulic line at minimum level. Pushtoconnect operation. Sleeve stopper mechanism is engaged by rotating sleeve after connection. It prevents accidental disconnection even when vibration or impact is applied to the Cupla. The special design reduces pressure loss considerably, and especially suited to hydraulic applications in which big flow is needed. Both socket and plug have builtin automatic shutoff valves that prevent fluid spill out on disconnection.

From factory air line to pneumatic tool connection, available in various body materials, sizes and end configurations. Excellent durability. An excellent general purpose coupling for connecting factory air supply to pneumatic tools. Steel coupling is suitable for air. Brass or stainless steel are suitable for water. Note that fluid will come out from the plug when disconnected. Critical structural parts of steel models are heattreated for increased strength giving greater durability and resistance to wear. Available in various body materials, sizes and end configurations applicable to a wide range of applications.

An excellent general purpose coupling for connecting factory air supply to pneumatic tools. Steel coupling is suitable for air. Brass or stainless steel are suitable for water. Note that fluid will come out from the plug when disconnected. Critical structural parts of steel models are heattreated for increased strength giving greater durability and resistance to wear. Available in various body materials, sizes and end configurations applicable to a wide range of applications.

1.5 ~ 2 Times Higher Flow. High flow type with "airless valve shutoff" design. Compared with Nitto’s conventional 35MPa Cuplas, the flow volume is increased 1.5 to 2 times. *Increase ratio of each flow volume depends on the Cupla size. "Airless valve shutoff" design minimizes spillage volume on disconnection and admixture volume of air on connection. Best suited for hydraulic lines with drastic high pressure pulsation such as in diecasting machines. Pushtoconnect operation and sleeve stopper design preventing accidental disconnection under vibration or impacts enhances workability and safety. Sizes are Rc 3/8, Rc 1/2, Rc 3/4, and Rc 1. *Only the same size of socket and plug can be connected.

- Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)

- R-thread - Whitworth pipe thread conical - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)

- Whitworth pipe thread - Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range 0 to 232 psi (0 to 16 bar)

- with shut-off valve - M5 thread - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range 0 to 232 psi (0 to 16 bar)

— Metric thread with hexagon socket — Chambered O-ring — Sealing NBR — Material brass nickel-plated — Temperature range -4 to 176 °F (-20 to +80 °C) — Working pressure range -14 to 232 psi (-0.95 to 16 bar)

- Whitworth pipe thread - Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)

- Whitworth pipe thread- VS seal rings - Seals in connectors NBR - Material brass nickel-plated - Temperature range -4 to 158 °F (-20 to +70 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. The Eltex CombiBlow CB160, 161 offers the best ionization power at a distance of up to 1 m thank to its combination of ionization and blast air. The CombiBlow does not need an external compressed air connection because it has an installed, two-stage blower. The CB16x is specifically used for film winders and in injection molding, but can also be used universally in other application areas that require ionization over long distances.

A real Plug-and-Play fully automated system which is ready to use anywhere at any time. You only need electricity, gas and air supply, then connect our CLOSURE PRINT COMPACT and production may start. No service technician for commissioning and no special qualified personnel at the customer are necessary. A high-precision, space-saving rotary pad printing fully automated system for small batch sizes. Feeding solution, parts transport for further processing to the point of a complete system solution − everything from one source.

Our absolute classic. Probably the most frequently sold spray head in the world. Universal spray head, very robust and suitable for all applications. Due to the large channel diameters and a direct supply, our HTR spray head can also be used with especially critical and viscous media. The quantity is dosed in the front at the nozzle. Our HTR spray head is available in two variants: The HTRR spray head has an M6 thread for fastening to a customer-side mount. The HTRB spray head has a ball joint. This allows it to be attached flexibly and precisely with the flexible HPM Technologie mounts. All of our spray heads are available individually or as a spray head group. The spray head group contains air and fluid connections (check valve) for the distributor. An optional check valve mounted on the spray head prevents the fluid from dripping out through the spray head in the case of a critical line route or critical positioning

Goodridge G-Link quick disconnect couplings (otherwise known as dry-breaks) are a lightweight coupling that can be disconnected and reconnected by hand/ lanyard in seconds; without the need to re-bleed the system. Perfect for brake lines, fuel lines, oil lines and pneumatics. There are two types of G-Link available, ‘bayonet’ and ‘pull type'; with a range of seals to suit different applications.