Steel welding - Import export

For example, casing made of nickel-chromium steel 1.4571 Procurement of materials Welding Mechanical engineering Surface treatment

They are the pipe made by stainless steel 304,mainly use for the connector.

These parts used for mechanical .

The process of sheet metal processing: Select the appropriate sheet metal, and carry out the necessary treatment and preparation, such as cutting, bending, stamping, etc Processing stage: forming the metal sheet, including cutting, bending, stamping, welding and other process operations Inspection stage: Conduct comprehensive quality inspection and evaluation of the final product, including appearance inspection, size inspection, performance testing, etc

QuellTech Solution For this purpose, QuellTech offers a perfectly tailored seam tracking solution, which is based on a QuellTech 2D-Laserline Sensor of the Q4 family. The method consists in measurement of the real position and width immediately ahead of the welding process. The laser sensor captures the real dimension of the weld bead, and the software used for this process simultaneously sends the nominal position to the robot. The robot performs a correction movement in X or Z position according to this measurement. This way not only the deviation caused by tolerances, but also the warping effect can be compensated – and the weldment takes place exactly at the required position. The QuellTech 2D-Laserline Sensor is specially prepared to the highly disturbing ambient light from the weld process. It can be cooled and protected from weld spatter, so this model proves to be particularly adequate for operation in the harsh environment of the welding process.

Particular challenges To correct the effect of the tolerances of the parts, the welding robots path in conventional applications is usually adjusted, by means of a time consuming manual correction (teaching). The warping effect caused by the thermal expansion however cannot be compensated this way. For this purpose, QuellTech offers a perfectly tailored seam tracking solution, which is based on a QuellTech 2D-Laserline Sensor of the Q4 family. The method consists in measurement of the real position and width immediately ahead of the welding process. The laser sensor captures the real dimension of the weld bead, and the software used for this process simultaneously sends the nominal position to the robot. The robot performs a correction movement in X or Z position according to this measurement. This way not only the deviation caused by tolerances, but also the warping effect can be compensated – and the weldment takes place exactly at the required position.

Stampling device for welding work ■ positioning, centering & clamping of metal part, with integrated part scanning The individuel customized solution will be performed according to customer specification!

Our tasks also include joint process optimization with our customers in order to enable more efficient production and thus a reduction in set-up and downtimes. Our spooling systems are a good example of this type of cooperation and continuous further development. We connect the strips using state-of-the-art welding technology and rewind them oscillating on a variety of spools Strip widths from 1.5 mm up to 60 mm Extension of the strip length to more than 200,000 meters in one strip depending on the material Individual laying widths from 100 to 400 mm Special decoiling racks with decoiling widths of 800 mm and maximum decoiling weights of 2,500 kg

Your expert in welding technics like MIG, MAG, WIG, resistance spot & stud welding, e-welding, welding robots For the returning serial welding tasks, 2 gantry welding robot system are available. With a machining length of up to 8 meters (26,2 ft), we can lealize complex customer requests thanks to 10 treatment axis performance. We are authorized to weld structural steelwork in accordance to EN1090

Discover our highly effective mobile welding protection wall made of cardboard - the perfect solution to protect your working environment from flying sparks and fire hazards during welding and grinding. This cut-to-size cardboard combines welding protection with environmental protection.

ROTAWELD is our platform to cover a wide range of applications requiring circumferential seam welding. The precision servomotor rotation axis combined with our advanced control system form the basis for the production of accurate and repeatable circumferential seam welds. Machine sizes, part holders, welding equipment, torch holders and any additional positional axes are designed specific to the customer and their products.

Schnelldorfer CORNERWELD seam welding machines have been designed to weld sheet metal plates in a 90° joint. The precision clamping system with inert gas coverage and advanced OEM control package precisely controls the welding sequence and weld parameters, resulting in the perfect weld for your corners. CORNERWELD applications include welded corners for food, medical equipment, HVAC drip pans, electrical enclosures, and laboratory furniture. Complex inward and outward flanges can be accommodated with custom made tooling pieces. A wide range of materials can be welded, including Stainless Steel, Carbon Steel and Aluminium. Complete welded parts do not require any costly grinding, polishing or blending thus greatly saving on manufacturing costs.

High quality, productive longitudinal seam welding calls for the utilisation of advanced, superior technology. This enables us to us to protect and expand our market position despite increasingly fierce competition. Our ELENA® longitudinal seam welders provide unsurpassed technology for welding of longitudinal metallic seams.

Made by cold forging, machining and welding, material stainless steel, sizes 250mm x 50mm x 15mm, weight 0,5kg, annual demand 800pcs

CNC controlled machine for belt grinding and polishing stainless steel weld seams. Belt grinding on the contact wheel or slack belt unit is possible for edge profiling.

The LIPP® Large Thermal Storage Tank is a customized solution to effectively store excessive heat from biogas plants, biomass heating plants, solar plants or other heat sources. The carbon steel tanks are fabricated on site with the patented automated LIPP® Welding Technology. The horizontal welding process enables the infinitely variable production of tanks up to 6,000 m³ volume with horizontal welding only. The largevolume, above ground storage tanks are fitted with all necessary safety and operation equipment. Additional, individual components according to client’s specification can be considered. The roof and wall insulation is individually adapted to local conditions. The LIPP® Thermal Storage Tanks operate at atmospheric pressure, at a temperature of up to 95° C and are suitable for use with heating water. Speciality No additional nitrogen system necessary.

Economical owing to highest availability Robust and extremely low maintenance Easy handling Minimum space requirement Stainless steel configuration ASLF 'Anti-Strap-Loss-Function' Constant strap control Strap width 5 - 12 mm, either DAT 'Direct-Access-Technology' The exclusive eject function avoids strap jam Torque controlled strap tension, adjustable Upstream and downstream interlocks Conveyor speed steplessly adjustable Belt type or roller conveyor Stainless steel welding plate, low maintenance GreenTech energy concept, low power consumption High-Speed-Kit, optional Intuitive operator interface MFT 'Mono-Frame-Technology' Bundle press, optional SAO 'Safe and Open' - Safe without protection doors Bundle flow control Wear-free, energy saving direct-drive-motors Low maintenance and low wear strap arch Many specific options available, easily configurable

The core of the technology is the automated welding process, where the tank is simultaneously welded on the inside and the outside. Similar to the Lipp double fold technology the material will be pre formed by Lipp special forming machines and reinforcement ribs are applied for additional stability. By doing so, the wall thickness can be reduced which will have an economic effect on the overall material costs, without compromising structural stability. The process also enables the installation of roofs and other accessories at ground level, which reduces the risk of working at heights. The main application for the new Lipp welding technology is the drinking water sector. However, there is lots of market potential in the food and beverage industry, chemicals and pharmaceuticals as well as other industries. The black steel welding technology enables the installation of bulk silos with huge diameters and volumes, which is a significant improvement compared to today.

Whether for manual welding in steel construction with 15-18 kg spools or for semi-automated and fully automated welding with drums of up to 750 kg wire weight, WDI has the right drum in its range for every application. Container types for unalloyed and medium-alloyed shielding gas welding wires

The industrial pressure transmitter DMP 335 is based on a stainless steel welded pressure sensor without fluid. This characteristic has a special advantage with applications where silicon oil or elastomeric seals cannot be used. Features: — nominal pressure: 0 ... 16 bar up to 0 ... 600 bar — accuracy: 0.5 % FSO — suitable for oxygen applications — insensitive to pressure peaks — high overpressure capability Optional Features: — IS-version Ex ia = intrinsically safe for gases and dusts — customer specific versions

Compact OEM Pressure Transmitter Heavy Duty Applications: ► mobile hydraulic, presses ► general mechanical engineering Characteristics: ► stainless steel sensor, welded ► accuracy according to IEC 60770: 0.5 % FSO ► nominal pressure ranges from 0 … 16 bar up to 0 … 600 bar

The stationary clinching unit DFG 400/50 PH is our cheapest model with which you can enter into a stationary and reliable production. A compressed air connection with a maximum inlet pressure of 16 bar is necessary and the operating pressure is adjustable. Designed for use cases in ventilation and ducting industry, sound proofing, steel and metal working industry, sign manufacturing, roof building, plumbing, computers, electronics and lighting industry. • Favourable stationary solution • Processing of bulky or hollow components • Large horizontal and vertical throat • High-value joining result due to adjustable path restriction • Reproducible results • Suitable for use under permanent load • Low-noise Clinching tools (punch and die) are not included in the scope of delivery. They must be chosen separately, based on the actual joining task. Contact us for a customised offer, tools included!

The MCD 30/5 PH portable clinching frame is a sturdy, light-weight machine with one-hand control. This clinching frame has been specially designed for mobile use. The portable clinching frame comes with a continuously adjustable stroke limitation for reproducible clinching result. Its frame head can be rotated by 360° for easy positioning on workpieces. The clinching frame is driven by our pneumohydraulic pressure booster PHD-002. • Handy, light-weight design • For mobile application • One-hand operating device • Adjustable path limitation • Frame head can be rotated by 360° This offer includes: Portable clinching pliers MCD 30/5 PH Pneumohydraulic pressure booster PHD-002 Clinching tools (punch and die) are not included in the scope of delivery. They must be chosen separately, based on the actual joining task. Contact us for a customised offer, tools included!

The MZD 45/35 P portable clinching pliers are a hand-held device with a compressed air connection. The key features of this portable ECKOLD product are its lightweight design, large throat and 360° swivelling suspension mechanism. Thanks to the large throat and the excellent reproduction accuracy of the preset yet adjustable stroke, the pliers are particularly suitable for joining tasks in the HVAC sector. Other advantages of the device are the cheap tools, the sturdy overall design and the low maintenance costs. This offer includes: Portable clinching pliers MZD 45/35 P Clinching tools (punch and die) are not included in the scope of delivery. They must be chosen separately, based on the actual joining task. Contact us for a customised offer, tools included!

This cordless clinching device is a low-cost and universal frame from the ECKOLD range of hand-held machines. Apart from the standard models, we offer of course also customised frames. Do you want to produce a prototype? Do you need a fall-back option for your production? Or are there clinching tasks to be performed on site? Then opt for the MCD 30/50 AH portable clinching frame. • Universal application • Portable and cordless • Sturdy design, suitable for construction side • Large opening width, good component accessibility • Frame head 360° turnable • Continuously adjustable path limit • Different clinching techniques possible • Comfortably packed in transportation case • LED light • Digital display • Klauke i-press software Clinching tools (punch and die) are not included in the scope of delivery. They must be chosen separately, based on the actual joining task. Contact us for a customised offer, tools included!

The MZD 60/6, MZD 60/6 D, MZD 60/6 W and MZD 60/6 D-W portable clinching pliers are hand-guided machines. These ECKOLD pliers come with a large throat and a high press force, which makes them the ideal tool for all clinching options. They can be customised with exchangeable tool holders for a wide range of applications. The clinching pliers have been specially designed for mobile use and come with a single-acting hydraulic cylinder producing a press force of max. 60 kN or 80 kN. The pliers are connected to the hydraulic unit with a 6 m hydraulic hose and a hydraulic drive unit. The various pliers are customised for specific applications. Contact us for specialist advice about our tool options for your joining tasks. Clinching tools (punch and die) are not included in the scope of delivery. They must be chosen separately, based on the actual joining task. Contact us for a customised offer, tools included!

Stud welding equipment with capacitor discharge Suitable for welding steel, stainless steel, aluminium and brass Weldable stud range 3-8 mm stud diameter Continuously adjustable charging voltage Digital display of charging voltage Weight only 8,9 kg Steel housing, powder-coated

Stud welding equipment with capacitor discharge Suitable for welding steel, stainless steel, aluminium and brass Weldable stud range 3-10 mm stud diameter Continuously adjustable charging voltage Digital display of charging voltage Weight only 9,9 kg Steel housing, powder-coated

EWM welding consumables for MMA welding Welders can choose between different stick electrodes with different coating materials to work with: — unalloyed steels — low-alloy heat resistant steels — high alloy steels — Copper-based materials — Cladding