Results for
WESTFÄLISCHE DRAHTINDUSTRIE GMBH
Germany
Westfälsche Drahtindustrie GmbH uses highly efficient plant technology at its Salzgitter site to produce cold-ribbed reinforcing steel (CR) in rings and coils, as well as structural steel mesh. Thanks to special wire rod primary material for our CR products, which we have developed in close cooperation with our suppliers, our reinforcing wire achieves first-class technical values, particularly in terms of elongation and the Re/Rm ratio The advantages for the user: easy processing and dimensional accuracy of the hangers. Seamless quality monitoring from the wire rod to the finished product by our own quality centre and our external monitoring centre (MPA Dortmund) guarantees the highest level of lasting quality and safety.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
Mechanical parts - washers.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These are the pin ring made by stainless steel,which is the accessories used for sensor.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These the accessories used for machines.
Request for a quoteBORNEMANN GMBH
Germany
Steel types, also called type stamps, can be produced in all dimensions. The design is flexible: type stamps with or without groove, with labelling groove, in T shape (T type) and L shape (L type) as well as conical or segment types, which are put together as a ring. Cylindrical steel types can also be produced. The font size is guided by your drawing. The type stamps are hardened and annealed in accordance with the purpose and can be used immediately. Labelling is also possible in unmistakable fonts or with rounded-off engraving in addition to standard designs. Also possible are point font or low stress to avoid cracks in the stamping material.
Request for a quoteIGUS® GMBH
Germany
Special properties: Slewing ring with high stiffening Simple installation, replaceable, maintenance-free sliding elements made of iglidur® J High wear resistance Available as aluminum or stainless steel version V4A (stainless steel only for PRT-01-60 and PRT-01-100) iglidur® PRT slewing ring plain bearing data d [mm]: Special properties: Suitable up to 180°C, high chemical resistance For all 5 standard dimensions of style 01 Body in aluminium or stainless steel, sliding parts in iglidur® H1 d [mm]: Special properties: Free of lubrication and maintenance. For use in extreme dirt. Corrossion-resistant Robust and ready to install Available in dimensions 60 and 100, oneside (-D) or boothside (-DD) seal d [mm]: Special properties: For use in the food industry with gliding elements made of FDA-compliant iglidur® A180 instead of iglidur® J standard. Can be naturally combined with the stainless steel versions of the slewing ring bearing. Lubricant- and maintenance-free For use in extreme dirt. Ready to install Rugged and wear resistant Application areas: Food processing industry d1 [mm]: Special properties: Slewing ring with high stiffening Simple installation, replaceable, maintenance-free sliding elements made of iglidur® J High wear resistance Available as aluminum or stainless steel version V4A (stainless steel only for PRT-01-60 and PRT-01-100) d [mm]: Special properties: Suitable up to 180°C, high chemical resistance For all 5 standard dimensions of style 01 Body in aluminium or stainless steel, sliding parts in iglidur® H1 d [mm]: Special properties: Free of lubrication and maintenance. For use in extreme dirt. Corrossion-resistant Robust and ready to install Available in dimensions 60 and 100, oneside (-D) or boothside (-DD) seal d [mm]: Special properties: For use in the food industry with gliding elements made of FDA-compliant iglidur® A180 instead of iglidur® J standard. Can be naturally combined with the stainless steel versions of the slewing ring bearing. Lubricant- and maintenance-free For use in extreme dirt. Ready to install Rugged and wear resistant Application areas: Food processing industry d1 [mm]: 1 Aluminum, hard anodized 2 iglidur® J sliding elements
Request for a quoteFILTERTECHNIK JÄGER GMBH
Germany
We adapt our filter bags exactly to your specific requirements and thus create the highest process reliability for you. FTJ filter bags are available in sewn and welded design, with plastic collar and stainless steel ring. We offer standard filter bags, high performance filter bags and absolute rated filter bags. Made of monofilament fabric (surface filtration) Optionally with plastic collar or stainless steel ring
Request for a quoteFILTERTECHNIK JÄGER GMBH
Germany
We adapt our filter bags exactly to your specific requirements and thus create the highest process reliability for you. FTJ filter bags are available in sewn and welded design, with plastic collar and stainless steel ring. We offer standard filter bags, high performance filter bags and absolute rated filter bags. Standard filter bags made of needle felt in PP or PES Optionally with plastic collar or stainless steel ring or galvanized ring
Request for a quoteGUMMIWARENFABRIK EMIL SIMON GMBH & CO. KG
Germany
For use as an expansion joint in suction and pressure lines. As a suction hose on suction dredgers with narrow bending radiuses. To handle fine and coarse-grained materials. Also suitable for tough transport applications of dry materials in the mining field. Construction: Highly abrasion-resistant tube Tension and pressure-resistant special fabric inlays Concealed steel rings UV, ozone and weather-resistant, abrasion-resistant cover Interior smooth, exterior deep corrugated Cut to length with built-in flanges. Other versions and dimensions on request.
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Cutting rings Category Screw connections, adapter a. accessories / Pipe connections 24° french series / Parts / Cutting rings / Steel Product number supplier 439024225
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Cutting rings Category Screw connections, adapter a. accessories / Pipe connections 24° french series / Parts / Cutting rings / Steel Product number supplier 439024225
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
U - washer seals With centering Temperature range: - 30°C up to +100°C metallic flat seal with inner vulcanised, trapezoidal, rubber elastic seal shoulder for static sealing in front of unions ... Category Sealings / U-Seal rings / Steel Product number supplier 431348
Request for a quoteROCHOLL GMBH
Germany
We love a challenge so we are more than happy to take on special designs. We translate your specifications into top-quality products. In order to meet the most stringent requirements, we rely on our comprehensive machine park and on the production facilities run by highly specialized partner companies. These machines have been designed to manufacture both individual items and batches without any problems. Would you like to have more detailed information on our special designs? Why not contact us directly? We will be happy to assist you. Milling of profiles Special concrete designs Rings for placing Shore test specimens Milling of dumbbell test specimens for tensile tests Multiple test specimens according to DIN 53281ff Stainless steel rings for tests according to EN ISO 10563 Spacers for standard joints according to ISO 11600 Spacers for elongation test according to ISO 11600, made of aluminum or PMMA in various % values Feed mechanisms
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Category Low pressure hoses and fittings / Industrial couplings / Tank truck-couplings / Tension ring lever / Stainless steel Product number supplier 330500055v
Request for a quoteFRANKE GMBH
Germany
Franke bearing asseblies type LVD are ready to install bearing assemblies with external gear, steel housing rings and integrated bearing elements. Franke bearing assemblies type LVD are suitable for medium rotational speeds and accuracies. They can be supplied at short notice, in some cases even from stock. Designed as 4-point bearings, they can support equally high loads from all directions and are insensitive to shocks and vibrations. The bearing elements are sealed on both sides and adjusted to preload.
Request for a quoteGUMMIWARENFABRIK EMIL SIMON GMBH & CO. KG
Germany
Preformed connecting element to handle gasses, liquids with solid content, or highly abrasive solids in the suction and pressure field. Outstanding as a substitute for steel arches or steel funnels with longer service lives. Temperature resistant from –40°C to +260°C depending on the application. Construction: Special quality tube depending on the medium Tension and pressure-resistant fabric inlays UV, ozone and weather-resistant cover Interior and exterior smooth, fabric patterned optional: embedded steel rings or steel spiral optional: heat protection cover optional: antistatic version optional: wall reinforcement at bends In fixed lengths. The tooling to produce connecting elements is produced in our tooling shop according to customer drawings. Other versions and dimensions on request.
Request for a quoteFRANKE GMBH
Germany
Franke Bearing Assemblies Type LVA are ready-to-install bearing assemblies with steel housing rings and integrated bearing element. They are suitable for medium rotational speeds and accuracies. They are available at short notice, some of them even from stock. Designed as 4 point bearings, they can support equally high loads from all directions and are insensitive to shocks and vibrations. Type LVA bearing assemblies are sealed on both sides and adjusted with preload.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FILTERTECHNIK JÄGER GMBH
Germany
We adapt our filter bags exactly to your specific requirements and thus create the highest process reliability for you. FTJ filter bags are available in sewn and welded design, with plastic collar and stainless steel ring. We offer standard filter bags, high performance filter bags and absolute rated filter bags. High performance filter bag made of needle felt in PP or PES (welded/sewn version) Longer lifetime Higher dirt absorption capacity Fully welded seams Special bag filter seal Full compatibility with the entire FTJ filter housing program Production according to the highest quality standards
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
U - washer seals With centering Temperature range: - 30°C up to +100°C metallic flat seal with inner vulcanised, trapezoidal, rubber elastic seal shoulder for static sealing in front of unions ... Category Sealings / U-Seal rings / Steel Product number supplier 431348
Request for a quoteGMN PAUL MÜLLER INDUSTRIE GMBH & CO. KG
Germany
"Ball bearings with a material combination of bearing steel (inner and outer rings) and ceramic (balls) are called ‘hybrid’ ball bearings. All GMN ball bearings can be supplied as hybrid ball bearings. The material characteristics of ceramic balls in hybrid ball bearings result in significant increases in machine performance (in comparison to ball bearings using steel balls), especially under critical conditions.
Request for a quoteGUMMIWARENFABRIK EMIL SIMON GMBH & CO. KG
Germany
Versatile, highly flexible handling hose for use in zero-pressure applications. For suction and pressure purposes with additional rings. Compressible to approx. 30% of original length. Robust version to handle solid media in the most cramped installation conditions. Outstanding axial and lateral movement. For information on temperature and media resistances please see our Simon resistances chart. Construction: Tube in special quality depending on the medium to be handled Tension and pressure-resistant special fabric inlays Optional: Concealed spring steel wire rings UV, ozone und weather-resistant cover Interior and exterior corrugated Couplings or flanges at both ends In fixed lengths with cuffed ends and/or widened hose endings. Other versions and dimensions on request.
Request for a quoteSCHULZ STANZTECHNIK GMBH
Germany
Material Schulz Stanztechnik manufacturers these axial ball bearings using the materials suited to the specific application. For the housing, steel, brass or stainless steel are used; for rings, steel or stainless steel which is always hardened. The balls are made of chrome or stainless steel, which is also always hardened. All material combinations – depending on their conditions of use – are possible for the assembly of the individual parts. Various surface coats for the individual parts can be supplied as well as finished bearings: brass which is uncoated or nickel plated; steel and stainless steel which is uncoated, zinc plated or nickel plated. All bearings are available lubricated or unlubricated. Structure DLG100 axial ball bearings consist of sheet metal housing, two hardened rings as well as hardened precision balls. Due to their structure, we refer to them as an encapsulated, full ball design.
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Stainless steel u - washer seals With centering Temperature range: - 30°C up to +100°C metallic flat seal with inner vulcanised, trapezoidal, rubber elastic seal shoulder for static sealing in ... Category Sealings / U-Seal rings / Stainless steel Product number supplier 431388v
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Stainless steel u - washer seals With centering Temperature range: - 30°C up to +100°C metallic flat seal with inner vulcanised, trapezoidal, rubber elastic seal shoulder for static sealing in ... Category Sealings / U-Seal rings / Stainless steel Product number supplier 431388v
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Round, steel waste basket with 30 mm wide perforation ring. Capacity: 15 litres. • Round waste paper basket • Capacity: 15 litres • Made from scratch-proof, epoxy resin-coated steel • With a 30 mm wide decorative ring of perforations • Suitable for use in offices, hotels and other prestigious spaces
Request for a quoteKIS ANTRIEBSTECHNIK GMBH & CO. KG
Germany
Our KIS hybrid bearings combine the best of two worlds - the robustness of classic rolling bearings (or stainless steel bearings) and the efficiency of state-of-the-art materials. With an optimised combination of high-quality steel rings and precise ceramic balls, our hybrid bearings offer outstanding strength and durability. Rolling elements made of ceramic offer a current-insulating property. These hybrid bearings have the same dimensions as comparable all-steel bearings and can significantly improve the reliability and robustness of machinery and equipment. In particular, they show their advantages in applications where the bearings are confronted with contamination from abrasive particles, insufficient lubrication, vibrations or current passage. At KIS, we optimise our materials for hybrid bearings to ensure flawless performance in applications under critical conditions at all times.
Request for a quoteWESTFÄLISCHE DRAHTINDUSTRIE GMBH
Germany
Westfälsche Drahtindustrie GmbH uses highly efficient plant technology at its Salzgitter site to produce cold-ribbed reinforcing steel (CR) in rings and coils, as well as structural steel mesh. Thanks to special wire rod primary material for our CR products, which we have developed in close cooperation with our suppliers, our reinforcing wire achieves first-class technical values, particularly in terms of elongation and the Re/Rm ratio The advantages for the user: easy processing and dimensional accuracy of the hangers. Seamless quality monitoring from the wire rod to the finished product by our own quality centre and our external monitoring centre (MPA Dortmund) guarantees the highest level of lasting quality and safety.
Request for a quoteWESTFÄLISCHE DRAHTINDUSTRIE GMBH
Germany
Westfälsche Drahtindustrie GmbH uses highly efficient plant technology at its Salzgitter site to produce cold-ribbed reinforcing steel (CR) in rings and coils, as well as structural steel mesh. Thanks to special wire rod primary material for our CR products, which we have developed in close cooperation with our suppliers, our reinforcing wire achieves first-class technical values, particularly in terms of elongation and the Re/Rm ratio The advantages for the user: easy processing and dimensional accuracy of the hangers. Seamless quality monitoring from the wire rod to the finished product by our own quality centre and our external monitoring centre (MPA Dortmund) guarantees the highest level of lasting quality and safety.
Request for a quoteWIGTEC FISCHEREDER KG
Germany
The requirements placed on components in the medical sector are extremely stringent, since, for example, the welds, in addition to the technical quality, must also meet the highest demands in terms of optics. For example, we produce stainless steel slideways for the slip rings of computer tomographs. We were also able to support our customers here in choosing the materials and the definition of the welded joint.
Request for a quoteResults for
Steel rings - Import exportNumber of results
60 ProductsCountries
Category