Steel hooks - Import export

for rods up to 13 mm Ø*nickel plated brass screw*with plastic handle

Snap hook with spring

Snap hook with movable, round swivel

Snap hook with both-sided snap fit

This stainless steel roof hook for plain tile roofing should always be installed with the appropriate sheet metal tile. Due to the low load-bearing capacity of this type of tile and the long roof hook bracket, this prevents tile breakage and water damage.

Touwing hook with spring cap and fixed, round eye

Snap hook similar E-DIN 5299 with safety screw and forged, round eye

Snap hook similar E-DIN 5299, with forged, round eye

Touwing hook with safety sheet and fixed round eye

Snap hooks made from steel

We use many different welding methods to produce endlessly spliced conveyor and process belts, always depending on the material and intended application. The endless splice punched finger splice stepped finger splice multilayered stepped splice conical splice The mechanical fastener Steelgrip fasteners, stainless steel Wire hooks, steel or stainless steel Polyester zip splice Self-lock fastener, stainless steel Plastic splice Nieka fastener Bonded wire hooks PVC/PU Minet fasteners

The materials steel and aluminium ensure that the tubing clamp stop-it metal is extremly heat resistant and sturdy. The tubing clamp is available in four different sizes, for hose diameters up to max. 30 mm. The tubing clamp can be used wherever the flow in hoses with liquids or gases needs to be regulated or stopped. Stepless flow regulation: With the tubing clamp stop-it's knurled screw, a stepless, delicate flow regulation or complete stop of the flow are possible, even for existing hose connections. The hose is compressed over a wide area against the sturdy steel hook in order to prevent it from being damaged.

This coin feeder enables continuous feeding of a coin sorting machine or a coin wrapping machine. Fill level controlled by detectors. Adaptation to your coin trolleys. - Robust frame made of epoxy painted steel - Hooking device for all types of trolleys - Specially designed trolley that is easily handled and adaptable to the forklift truck - Possibility of manufacturing to your dimensions depending on the quantity required - Height adjustable from 500 to 1300 mm - Dimensions can be changed on request - Speed: up to 7000 pieces/min - Speed control by variator The materials comply with the applicable EC standards.

Easy-Click closure - stop-it can be opened and closed in any position - without tiresome screwing on and off. High quality material - stop-it made from the heat resistant and chemical resistant plastic PVDF. The clamp is galvanised steel. The hose clip can be used wherever the flow in hoses with liquids or gases needs to be regulated or stopped. Stepless flow regulation: With the hose clip stop-it's knurled screw, a stepless, delicate flow regulation or complete stop of the flow are possible, even for existing hose connections. The hose is compressed over a wide area against the sturdy steel hook in order to prevent it from being damaged.

JDN Air Hoists PROFI 3 TI up to PROFI 100 TI also available as hydraulic hoists. PROFI 3 TI JDN Air Hoists PROFI Carrying capacities: 250 kg up to 100 t Air pressure: 4 bar or 6 bar Standard Features suitable for application in hazardous areas (Explosion protection) sensitive infinitely variable speed control for the precise positioning of loads easy operation suitable for lube-free operation frequent switching and extended duty cycles low maintenance low headroom, lightweight sound absorption insensitive to dust, humidity and temperatures ranging from -20°C up to +70°C from 1 t upwards with overload protection (EC-version) Technical Details fail-safe starting conditions, low maintenance vane motor chain sprocket in the mid section runs in dust proof maintenance free ball bearings planetary gear in long life grease lubrication, all teeth made of tempered or hardened high grade steel chain and hook of high quality tempered steels with a breaking strength of five times the...

Since 1999, we have also been manufacturing ball catcher curtains in-house, which perfectly match the colours of the two-tone tennis surface and give an old tennis hall a new look. The ball catcher curtains are customised in our factory from high-quality polyester fabric (fire class B1). They are hung with snap hooks on a steel cable. Refurbishing your tennis hall with a two-colour tennis surface and ball catcher curtains on the rear eaves walls - and on the gable walls if required - gives you the opportunity to implement completely new colour concepts and to make your customers aware of the refurbishment measures by means of a new hall appearance with an eye-catching effect. In addition to their functionality and good looks, ball catcher curtains also offer advantages in terms of acoustics and thermal insulation.

WLL 100 kg | A - 116 mm, B - 16 mm, C - 36 mm, D - 22 mm

This low-cost, stainless steel roof hook has a cranked shaft - perfect for bridging the roof battens - and is secured in a few easy steps by simply screwing 2 stainless steel screws through the counter battens into the beam below. Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Simply screwed onto a wooden beam (min. 60 mm x 120 mm) Incl. installation materials (screw length: 160 mm length, Ø 8 mm)

This stainless steel, type B roof safety hook for metal seam roofs is suitable for all directions of load (apart from axial loads). It is simply clamped onto a seam without needing to penetrate the roof surface. Our roof hook is installed quickly and easily using the 4 nuts and bolts supplied. Roof safety hook in accordance with EN 517:2006, type B Anchorage point for PPE + ladder hooks For stainless steel ≥ 0.5mm; copper and titanium zinc ≥ 0.6mm; aluminium ≥ 0.7mm Simple, penetration-free installation using just 4 bolts Designed for rounded-edge and standing edge roofs Incl. stainless steel installation set

Thanks to its special base plate, this stainless steel roof safety hook can be flexibly adjusted to fit the angle of your roof surface. The cranked shaft is designed to bridge the battens. It is installed by screwing the 2 stainless steel screws supplied through the counter lathing and into the beam below. Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Designed for load-bearing wooden structures Base plate allows flexible installation Simply screw it onto a wooden beam (also suitable for over-rafter insulation) Min. beam dimensions: 60 mm x 120 mm

This stainless steel roof safety hook - specially designed for tiled roofs - is equipped with a cranked shaft for bridging the roof lathing. Is it simply installed by screwing the 2 stainless steel screws supplied through the counter lathing and into the woodem beam. We also supply an optional installation set for flexible attachment to a specially-prepared wooden panel (instead of a beam). This roof hook can be implemented as a natural conducting component in a lightning protection system (100 kA) in accordance with EN 62305-3 Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Designed for load-bearing wooden structures Simply screw it onto a wooden beam (also suitable for over-rafter insulation) Min. beam dimensions: 60 mm x 120 mm Installation materials included

This stainless steel roof safety hook with its flat shaft is simply installed on a continuous wooden beam. The 2 stainless steel screws supplied are screwed into the beam through the counter lathing/panelling. Special screws are also available for installing the device on top of over-rafter insulation. This roof hook can be implemented as a natural conducting component in a lightning protection system (100 kA) in accordance with EN 62305-3 Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Designed for load-bearing wooden structures Simply screw it onto a wooden beam (also suitable for over-rafter insulation) Min. beam dimensions: 60 mm x 120 mm Installation materials included

This stainless steel roller glider was developed for permanent implementation in a straight lifeline system (8 mm). It is used overhead and is made of extremely robust 316 steel material. Roller glider for lifeline systems (8 mm) (only straight routes) Specially designed for overhead usage Manufactured from extremely robust stainless steel material (316) Incl. carabiner hook in accordance with EN 362 Secures 1 Person in compliance with DIN EN 795:2012

the steel cover hoods are obtainable from us in 11 standard or norm dimensions for every conveyor belt. For the purpose of checking the conveyor system, the hooded covers can easily be removed and replaced at any location. Every hooded cover dimension is also available, upon request, with different inspection and maintenance openings or as quick sliding hood (ASS hood®, European patent). in stock special requirements such as Jumbo hooded covers, segmental arch hooded covers, segment hoods, lower belt covers etc can also be delivered.