Results for
CARL FRIEDRICH USBECK KG
Germany
for rods up to 13 mm Ø*nickel plated brass screw*with plastic handle
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Snap hook with spring
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Snap hook with movable, round swivel
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Snap hook with both-sided snap fit
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Touwing hook with spring cap and fixed, round eye
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Snap hook similar E-DIN 5299 with safety screw and forged, round eye
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Snap hook similar E-DIN 5299, with forged, round eye
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Touwing hook with safety sheet and fixed round eye
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Snap hooks made from steel
Request for a quoteJ.D. NEUHAUS GMBH & CO. KG
Germany
JDN Air Hoists PROFI 3 TI up to PROFI 100 TI also available as hydraulic hoists. PROFI 3 TI JDN Air Hoists PROFI Carrying capacities: 250 kg up to 100 t Air pressure: 4 bar or 6 bar Standard Features suitable for application in hazardous areas (Explosion protection) sensitive infinitely variable speed control for the precise positioning of loads easy operation suitable for lube-free operation frequent switching and extended duty cycles low maintenance low headroom, lightweight sound absorption insensitive to dust, humidity and temperatures ranging from -20°C up to +70°C from 1 t upwards with overload protection (EC-version) Technical Details fail-safe starting conditions, low maintenance vane motor chain sprocket in the mid section runs in dust proof maintenance free ball bearings planetary gear in long life grease lubrication, all teeth made of tempered or hardened high grade steel chain and hook of high quality tempered steels with a breaking strength of five times the...
Request for a quoteSCHÖPP-SPORTBODEN GMBH
Germany
Since 1999, we have also been manufacturing ball catcher curtains in-house, which perfectly match the colours of the two-tone tennis surface and give an old tennis hall a new look. The ball catcher curtains are customised in our factory from high-quality polyester fabric (fire class B1). They are hung with snap hooks on a steel cable. Refurbishing your tennis hall with a two-colour tennis surface and ball catcher curtains on the rear eaves walls - and on the gable walls if required - gives you the opportunity to implement completely new colour concepts and to make your customers aware of the refurbishment measures by means of a new hall appearance with an eye-catching effect. In addition to their functionality and good looks, ball catcher curtains also offer advantages in terms of acoustics and thermal insulation.
Request for a quoteABS SAFETY GMBH
Germany
Use this stainless steel hook device, which is firmly anchored to your building structure, to secure your ladder and prevent it from slipping and tipping. Attach it permanently to a wall or facade. Depending on your requirements, it can be screwed on, dowelled on or cemented into place using special adhesive. For fixing to a facade Ladder safety device for indoor and outdoor usage Prevents slipping and tipping Designed for rungs at least 280 mm wide Installation to be carried out using suitable installation materials depending on the surface (not included)
Request for a quoteABS SAFETY GMBH
Germany
This low-cost, stainless steel roof hook has a cranked shaft - perfect for bridging the roof battens - and is secured in a few easy steps by simply screwing 2 stainless steel screws through the counter battens into the beam below. Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Simply screwed onto a wooden beam (min. 60 mm x 120 mm) Incl. installation materials (screw length: 160 mm length, Ø 8 mm)
Request for a quoteABS SAFETY GMBH
Germany
This stainless steel, type B roof safety hook for metal seam roofs is suitable for all directions of load (apart from axial loads). It is simply clamped onto a seam without needing to penetrate the roof surface. Our roof hook is installed quickly and easily using the 4 nuts and bolts supplied. Roof safety hook in accordance with EN 517:2006, type B Anchorage point for PPE + ladder hooks For stainless steel ≥ 0.5mm; copper and titanium zinc ≥ 0.6mm; aluminium ≥ 0.7mm Simple, penetration-free installation using just 4 bolts Designed for rounded-edge and standing edge roofs Incl. stainless steel installation set
Request for a quoteABS SAFETY GMBH
Germany
Thanks to its special base plate, this stainless steel roof safety hook can be flexibly adjusted to fit the angle of your roof surface. The cranked shaft is designed to bridge the battens. It is installed by screwing the 2 stainless steel screws supplied through the counter lathing and into the beam below. Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Designed for load-bearing wooden structures Base plate allows flexible installation Simply screw it onto a wooden beam (also suitable for over-rafter insulation) Min. beam dimensions: 60 mm x 120 mm
Request for a quoteABS SAFETY GMBH
Germany
This stainless steel roof safety hook - specially designed for tiled roofs - is equipped with a cranked shaft for bridging the roof lathing. Is it simply installed by screwing the 2 stainless steel screws supplied through the counter lathing and into the woodem beam. We also supply an optional installation set for flexible attachment to a specially-prepared wooden panel (instead of a beam). This roof hook can be implemented as a natural conducting component in a lightning protection system (100 kA) in accordance with EN 62305-3 Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Designed for load-bearing wooden structures Simply screw it onto a wooden beam (also suitable for over-rafter insulation) Min. beam dimensions: 60 mm x 120 mm Installation materials included
Request for a quoteABS SAFETY GMBH
Germany
This stainless steel roof safety hook with its flat shaft is simply installed on a continuous wooden beam. The 2 stainless steel screws supplied are screwed into the beam through the counter lathing/panelling. Special screws are also available for installing the device on top of over-rafter insulation. This roof hook can be implemented as a natural conducting component in a lightning protection system (100 kA) in accordance with EN 62305-3 Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Designed for load-bearing wooden structures Simply screw it onto a wooden beam (also suitable for over-rafter insulation) Min. beam dimensions: 60 mm x 120 mm Installation materials included
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FTK FÖRDERBAND TECHNIK KILIAN GMBH
Germany
the steel cover hoods are obtainable from us in 11 standard or norm dimensions for every conveyor belt. For the purpose of checking the conveyor system, the hooded covers can easily be removed and replaced at any location. Every hooded cover dimension is also available, upon request, with different inspection and maintenance openings or as quick sliding hood (ASS hood®, European patent). in stock special requirements such as Jumbo hooded covers, segmental arch hooded covers, segment hoods, lower belt covers etc can also be delivered.
Request for a quoteResults for
Steel hooks - Import exportNumber of results
19 Products