Steam temperatures - Import export

The compact steam superheaters of type series PVN reach high steam temperatures even at low process pressure. Due to the compact design and control concept, they are characterised by short response times, high control precision, and high availability (existing redundancies). In many cases, our steam superheaters are designed as a "stand alone" system and provided completely assembled with all necessary safety devices and controls. The customer must only provide the process connection and the electrical connection.

Through integration of the segmented disc valve technology, the desuperheater type 5090 is able to control steam pressure and temperature in the steam network easily. By using four injection nozzles and finely tuned water conditioning, process steam is generated from superheated steam at 3 20 K above the saturated steam temperature.

This inline thermocouple is especially invented for using under humid conditions. Compared with normal wire production this wire isolation is made in one work process, both conductors get moulded in Teflon at the same time. With this wire the measurement equipment is protected from capillary rising moisture through the wire. gas-, steam- and watertight Temperature range: -75°C to +250 °C, short-duration to + 300 °C Wire type: Teflon,0.38 mm, solid, Tmax: +300 °C

Gearbox lubrication of heavily loaded, relatively slow-running toothed gearing when grease is used instead of oil due to leaks For heavily loaded and impact-loaded drives Chain lubrication, e.g. of hollow-pin chains in the conveyance and transport sector, for exposure to water and steam and at higher operating temperatures Bearing lubrication of friction and rolling bearings in annealing yards and drying systems, manipulators and robots, cooling-bed and conveyor systems, machines in food packing industry, steam sterilisers etc. Advantages and benefits Excellently suited for corrosive operating conditions with high operating temperatures and high pressure and impact loads Economical due to optimised formula Enables wear reduction, decreasing failure times and enabling long-term lubrication Long-acting, highly adhesive, temperature-stable and waterproof, noise-damping, impact and pressure resistant

single inlet/outlet line or combined inlet/outlet line with stationary or rotating syphon pipe universal usecooling, heating, clamping series with ball bearings, graphite bushbearing or solid grease ballbearings bellows sealing available in stainless steel CDCartridgeDesign PRESSURE MAXIMUM 6,0 bar heat transfer oil 10,0 bar air nontoxic gases steam 17,0 bar water TEMPERATURE MAXIMUM 300 °C air heat transfer oil nontoxic gases steam vacuum water SPEED MAXIMUM 600 1/min DN 80 (3") DN 100 (4") DN 125 (5") SIZEDN 80 (3") DN 100 (4") DN 125 (5")

universal usecooling, heating, clamping with bellows sealing Modular unit designcustomer taylered configuration, fast and economic cartridge fast change CDcartridgedesign sealingmaterial ceramics/graphite. For coking heat transfer oil with temperature higher than 230 °CVersion HT with diamondhard sealface and hightemperature graphitesealring graphite bushbearingsmaintenance free no elastomerstherefore no temperature and chemical resistance problems no loose parts, f.e. springs robust and less influence of dirty media self supportingno additional support necessary available in stainless steel PRESSURE MAXIMUM 6,0 bar air heat transfer oil 10,0 bar steam 17,0 bar water TEMPERATURE MAXIMUM 175 °C air 190 °C steam 300 °C heat transfer oil SPEED MAXIMUM 250 1/min DN 100 (4") 300 1/min DN 65 (2 1/2") DN 80 (3") 400 1/min DN 50 (2") SIZEDN 50 (2") DN 65 (2 1/2") DN 80 (3") DN 100 (4")

universal usecooling, heating, clamping with bellows sealing Modular unit designcustomer taylered configuration, fast and economic cartridge fast change CDcartridgedesign sealingmaterial ceramics/graphite ballbearings (can be relubricated) no elastomerstherefore no temperature and chemical resistance problems no loose parts, f.e. springs robust and less influence of dirty media self supportingno additional support necessary available in stainless steel PRESSURE MAXIMUM 6,0 bar air heat transfer oil 10,0 bar steam 17,0 bar water TEMPERATURE MAXIMUM 190 °C air heat transfer oil nontoxic gases steam vacuum water SPEED MAXIMUM 500 1/min NPT thread 800 1/min ISO 228 thread SIZEDN 50 (2") DN 65 (2 1/2") DN 80 (3") DN 100 (4")

universal usecooling, heating, clamping with bellows sealing cartridge fast change CDcartridgedesign sealingmaterial ceramics/graphite. For coking heat transfer oil with temperature higher than 230 °CVersion HT with diamondhard sealface and hightemperature graphitesealring graphite bushbearingsmaintenance free no elastomerstherefore no temperature and chemical resistance problems no loose parts, f.e. springs robust and less influence of dirty media self supportingno additional support necessary available in stainless steel PRESSURE MAXIMUM 6,0 bar heat transfer oil air 12,0 bar steam 17,0 bar water TEMPERATURE MAXIMUM 175 °C air 190 °C steam 300 °C water heat transfer oil SPEED MAXIMUM 700 1/min ISO 228 thread 700 1/min NPT thread SIZEDN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2")

universal usecooling, heating, clamping with bellows sealing cartridge fast change CDcartridgedesign sealingmaterial ceramics/graphite ballbearings (can be relubricated) no elastomerstherefore no temperature and chemical resistance problems no loose parts, f.e. springs robust and less influence of dirty media self supportingno additional support necessary available in stainless steel PRESSURE MAXIMUM 6,0 bar heat transfer oil air 10,0 bar steam 17,0 bar water TEMPERATURE MAXIMUM 190 °C water steam heat transfer oil air SPEED MAXIMUM 700 1/min NPT thread 1500 1/min ISO 228 thread SIZEDN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2")

In 2015 the product name was changed. The old product name was Castrol Viscotemp 2. Fully synthetic high-temperature lubricating grease Description Castrol Molub-Alloy 100-2 HT (previous product name Castrol Viscotemp 2) is a fully synthetic high-temperature lubricating grease for use at high continuous temperatures. It enables long-term lubrication of plain and rolling bearings and other grease lubrication points at high operating temperatures, high bearing pressures and aggressive environmental conditions. Application Castrol Molub-Alloy 100-2 HT is a high-temperature grease for the lubrication of rolling and plain bearings and is used in fan bearings in hot air flow, calender bearings, baking systems and continuous drying chambers as well as for overhead conveyors of painting lines that are exposed to chemical influences, as well as in cold or influence of hot water and steam. Instructions for use Temperature range: -20 °C to +220 °C

In 2015 the product name was changed. The old product name was Castrol Viscotemp 2. Fully synthetic high-temperature lubricating grease Description Castrol Molub-Alloy 100-2 HT (previous product name Castrol Viscotemp 2) is a fully synthetic high-temperature lubricating grease for use at high continuous temperatures. It enables long-term lubrication of plain and rolling bearings and other grease lubrication points at high operating temperatures, high bearing pressures and aggressive environmental conditions. Application Castrol Molub-Alloy 100-2 HT is a high-temperature grease for the lubrication of rolling and plain bearings and is used in fan bearings in hot air flow, calender bearings, baking systems and continuous drying chambers as well as for overhead conveyors of painting lines that are exposed to chemical influences, as well as in cold or influence of hot water and steam. Instructions for use Temperature range: -20 °C to +220 °C

The patented TECsteam steam booster nozzle is used for cooling steam close to the saturated steam temperature or hot gases. The temperature is controlled by the injection of water into the steam or hot gas stream whereby the water is thermally atomised using high pressure steam. The high pressure steam is removed from and returned uncontrolled to the high pressure steam system. The temperature-dependent cooling water is supplied via a control valve. Extremely short evaporation sections of less than 3 m can be realised with this valve.

Ultrasonic flowmeter for high temperature gas and steam As the OPTISONIC 8300 provides a large measurement range and does not require recalibration, the installation can be simplified and costs reduced. For example since the flow sensor does not need to be removed, shut off valves and a bypass are not required. Also thanks to the large measurement range, a dual range measurement setup is not required. Traditional steam measurement solutions need continuous attention and recalibration to guarantee proper operation. As the diagnostics of the OPTISONIC 8300 enables it to look after itself, it does not require any attention. Even periodically recalibration is not required since the OPTISONIC 8300 provides excellent long term stability. Periodical verification of the proper functioning of the device can easily be done using the diagnostics as required.

Maintenance-free butterfly valve series 41 - lug type - PN10/16/25/40/64/100 Use: Steam, High Pressure, High Temperature, Critical Service

Flange gaskets made of Klingersil C4500 - DIN EN 1514-1 IBC Use: Special high-pressure gasket for alkaline media with very high temperatures and hot steam. Carbon fibers and special heat resistant additives bonded with NBR. High-tech material, especially in strongly alkaline media and in the steam area. Fire safety according to API SPEC 6 FA. DIN-DVGW permit, BAM tested, KTW recommended, certified TA-Luft.

Application specific ring sets Improved properties are: Extrusion resistance, if high pressures have to be sealed and/or bigger gaps than the normally recommended max of 25 of the packing size are found. Wiper function, if any micro scaling is found on the stem and at reciprocating movement with control valves Blow out safety, when sealing high compressed gases and fumes Pliability, with low gland forces as well good reset and adaptability for example in applications with temperature cycles. Ring Set 3335 For Control Valves up to 400 °C. Ring Set 6655 For Control Valves and staem applications up to 600 °C steam. All rings are delivered as standard in skive cut. Ring Set 6660 For Valves up to 650 °C steam. This ringset offers minimal volumeloss. The rings in the sealing zone are split as standard in 2 halves or as option delivered with a skive cut. Top and bottom ring are delivered with skive cut. Soot Blower Ring Set For soot blower applications with steam temperature up to...

Expanded natural Graphite in Purity 98 % – industrial grade or 99.85 % nuclear grade (chlorine content < 20 ppm) Temperature in steam Density min. 1.40 g/cm 3 Characteristics High cross section density Self lubrication and limited wear Dry running capability Coefficient of thermal expansion similar to steel Maintenance free and elastic, also under variable pressure Non ageing, high chemical resistance Attention! Precise tolerances and surfaces of application are requeste Operating range Pressure [p max]: 800 bar Temperature: t = -200… +550 °C pH: 0 - 14 Density: 1.80 g/cm³ Temperature in steam Density min. 1.40 g/cm 3 Main application Fittings Pumps (high temperature) Covers Valves Suitable for Valves and fittings of all Industries Approvals Oxygen BAM 200 °C/250 bar DVGW and KTW Variant Rings with integrated reinforcement or endcaps made from ANSI 316 Special quality TA Luft 300 with a leakage rate of 5.7 · 10 -3 mbar · l/(s·m) 300 °C Form of delivery ARF rings - endless,...

The Mediprene 500M range of TPEs for medical applications includes several transparent grades. These compounds were developed in response to an increasing interest in transparent compounds from the medical market. Mediprene TPE materials are PVC, silicone and latex free, making them allergen free and a viable alternative to PVC based compounds. They offer hardnesses from 30 to 90 Shore A, allowing a wide degree of design freedom. Special Features Good transparency PVC, silicone and latex free Soft-touch appeal 30 to 90 Shore A Coloured, transparent grades Production site accredited to ISO 13485 Sterilizable with gamma, ethylene oxide (EtO) and steam Flexibility over broad temperature range Excellent sealing and adhesion Applications The ability to clearly see through a product to monitor the patient is an important feature for many medical devices such as face masks. Transparent TPEs can also be used in tubing and dental applications. Coloured &amp; transparent In medical devices

ipf cable sockets are used primarily for establishing the electrical connection of sensors. Their features are characterized by rugged design, the highest protection classes (IP67 \ IP68 \ IP69K) and, if desired, with 360° shielding. With the features: bus-ready, suitable for use with drag chains and robots, resistance to oil and chemicals, resistance to welding sparks, their resistance to cleaning agents or high-pressure and steam-jet cleaning, the expanded temperature range of up to +230°C, the rapid interconnection technology and special data transmission properties, the cable sockets meet all requirements in automation technology.