Special - Import export

Machine dies or special dies with a set geometry on the basis of customer data for labelling complex surfaces. Nearly every surface can be displayed. State-of-the-art cad/cam programs support us in the production process. The data you send in are processed by us and then input into our CNC engraving machine.

In particular applications, it can be necessary to hold high axial forces and torque at the same time. For pneumatic operation, our Locking Unit series KFPD meets this demand. Depending in the size, forces / torques of 12 kN / 120 Nm or 30 kN / 500 Nm can be held securely. The “normal” SITEMA Locking Units KFH are already able to hold smaller torque. Example: 280 Nm with, at the same time, an axial holding force of 100 kN on rod diameter 56. In case higher torque needs to be held, SITEMA’s special design series KFHD can help. With this design, it is possible to hold torque with a factor of 10 higher compared to the standard KFH unit. Example: 2800 Nm with, at the same time, an axial holding force of 100 kN on rod diameter 56. Whether the operation is pneumatic or hydraulic, the application is limited to static holding. The KFPD and KFHD can prevent a rotation from starting, but are not suitable to brake rotating masses.

KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Electric Locking Unit The electric Locking Unit KFE is used as a stepless locking device on round rods and holds axial forces in both load directions without axial play. It is used where hydraulic or pneumatic solutions are not possible. The holding force is created by the proven spring-operated clamping system as it is used in SITEMA’s hydraulically or pneumatically operated Locking Units. At a drop of the control voltage or in case of failure of the electric supply, the Locking Unit KFE clamps automatically. Therefore, it is also suitable for use in safety relevant applications. To operate the Locking Unit KFE, a supply voltage of 24 V and a control signal for the input command “clamp/release” are sufficient. The Locking Unit is self-monitoring and provides output signals...

KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Mechanical Safety Catcher The Mechanical Safety Catcher KRM is operated purely mechanically and requires neither a hydraulic nor a pneumatic system for control. The clamping head is kept open mechanically and acts upon rupture of the suspension (rope, belt, chain, etc.). The energy of the falling mass is then used to generate the clamping force. In applications where lifted loads can be dangerous in case of rupture of the suspension device, Safety Catchers KRM are used to protect people and assure accident prevention. Safety Catchers KRM secure the load at any point of the stroke in a mechanically safe and absolutely reliable way. Due to the principle of self-reinforcing clamping, a very high level of safety is reached. Application example Packing...

Mechanical Safety Catcher KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Auto Bleeder The SITEMA Auto Bleeder has been specially designed for the use with a SITEMA clamping head. It makes sure that the hydraulic system is constantly bled. Air bubbles in the hydraulic fluid might combust spontaneously under certain conditions (so-called Diesel effect). As a consequence, seals and sealing surfaces can be damaged, causing leakages. Clamping heads are especially susceptible for this phenomenon, as they have only a very small hydraulic volume and are not flushed through at each activation. Air can therefore easily accumulate in the clamping head. This is the reason why the usual initial bleeding at commissioning is often not enough, especially when the line leading to the clamping head points upwards...

More space to work – let the rods out! In particular applications, it can be necessary that the rod leaves the clamping head, e.g. for reasons of accessibility or restrictions regarding space that do not allow a rod that is permanently in place. Especially in applications where moulds are closed and kept closed against high forces with the SITEMA PowerStroke, it is a big advantage when the rod can leave the clamping head. Thus, the rods are no obstacle when taking finished parts out of the mould or when handling parts. With certain modifications, most of our series can be adapted as special designs to allow the rod leaving and re-entering the clamping head. We have already realised a great number of such solutions for vertical and horizontal applications. Contact us for more information!

Rod leaving clamping head Auto Bleeder Mechanical Safety Catcher KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Mechanical Valve Actuator MVA Secure the rupture of a chain with the full comfort of a pneumatic SITEMA clamping head When a load has to be secured against rupture of a suspension device (e.g. a chain), many customers use our Mechanical Safety Catcher KRM. This unit has the advantage to hold the load immediately upon rupture of the suspension device. Additional sensors to detect rupture of a chain are not necessary. On the other hand, it is not possible to activate the KRM in a user-defined position without rupture of the suspension device, e.g. for maintenance purposes. Here, the Mechanical Valve Actuator MVA comes to your rescue. It is simply put between the suspension device and the...

Mechanical Valve Actuator MVA Rod leaving clamping head Auto Bleeder Mechanical Safety Catcher KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Electropneumatic module EPM The Electropneumatic Module EPM acts as interface between (electrical) power supply / control and a pneumatic SITEMA clamping head. All pneumatic SITEMA clamping heads with an operating pressure of up to 4 bar and an operating volume of up to 220 cm³ can be pneumatically controlled by the EPM. It is also possible to operate several clamping heads in parallel with one EPM. The EPM is controlled by a 24V supply and switching voltage. The outlet pressure which is required to open or keep open a pneumatic clamping head is controlled by a control signal. If the voltage fails or the input signal is switched off, the pressure is...

Special types are type stamps, which run through a special production, as the complexity of some shapes demands special production. Wire-cut or 5-axle special types for segments or segment stamping can be produced in every form. The selection of the materials is guided by the use.

chainflex® special cables are cables for special applications such as hanging applications, for use in rail vehicles or thermal and compensation cables. Use our comprehensive knowledge about cable plus the experience of 2 billion test cycles that are annually realized in the company-owned chainflex® laboratory. The steadily growing product range of the chainflex® special cables is based on the requirements of our customers. igus® also manufactures cables for special applications and uses a wide range of materials and manufacturing processes. Depending on the design, customer-specific special products can be made from lengths of 500 m. We look forward to hear about your job definition!

by combining multiple parts such as a captive washer and screw into a single versatile fastener, KEBA SEMS screws provide efficiencies both in design and manufacturing.

range consists of individually designed engineering solutions resulting in the creation of innovative and complex fastening elements formed in up to six blows. 100% adaptable to any application Minimization of materials used and inventory costs Multi-functional use allows for large savings Simple and ecient assembly Alternative and replacement of turned parts

are designed to lock into a hole while allowing the fastened components to be detached without the complete removal of the screw itself. A Captive Screw can be locked in place on a parent component without being fastened to a child component Captive Screws are typically locked in place via thread locking, press fitting or broaching Captive Screws help control costs by minimizing damage to machinery from loose screws and by reducing the need for replacement fasteners Captive Screws allows for easier and more ecient repairs due to quick access to components Captive Screws prevents damage from loose screws falling into moving parts or electrical circuits as well as the loss of screws Captive Screws also provide a longer durability as they do not cause damage to the application after usage cycles; they are permanent, yet allow access into the application

were developed primarily to meet the lightweight requirements of the automotive industry. Lightweight Durability Flexibility Thermal & Corrosion resistant Eco-friendly Operating safety — vibration resistance No design restrictions Original ALUfix screws are produced with EN AW 5052 (AlMg2.5) alloy material. Dependent upon customer requirements and characteristic needs, adjustments can be made to alloy components.

Description REFINED SUGAR GRADE A - ICUMSA 45 Origin : Brazil and Thailand Icumsa : 45 RBU Polarization : 99.80% Min Ash content : 0.04% Max Moisture : 0.04% Max Solubility : 100% Free Flowing Radiation : Normal Certified Colour : Sparkling White Granulation : Fine

Disinfectant is the all-purpose agent when it comes to protection against bacteria, fungi and viruses. Disinfectants are most commonly found in doctors’ surgeries, clinics, as well as at home. It largely reduces the colonisation of germs on hands and surfaces, thus reducing the probability of infection by germs. The WFS offers you private label solutions for disinfectants: Alcohol-based hand disinfectants and alcohol-based surface disinfectants. In addition, WFS offers various services related to disinfectants, e.g. consulting, manufacturing, filling and packaging

Fermit Special

A must for every pet owner is the care. Daily life together also requires observing the regular hygiene of the animal. This applies to all types of animals, from pets to livestock. For almost every need of the animal companion, there are appropriate sophisticated care products. There is hardly any difference between these products and what a person would use for care. The wholesome ingredients can, among other things, calm, clean or protect the animal. Dietary supplements, products for washing and refining the coat or even tooth and ear care products are available. WFS develops and produces the right product for you on customer’s order.

We love a challenge so we are more than happy to take on special designs. We translate your specifications into top-quality products. In order to meet the most stringent requirements, we rely on our comprehensive machine park and on the production facilities run by highly specialized partner companies. These machines have been designed to manufacture both individual items and batches without any problems. Would you like to have more detailed information on our special designs? Why not contact us directly? We will be happy to assist you. Milling of profiles Special concrete designs Rings for placing Shore test specimens Milling of dumbbell test specimens for tensile tests Multiple test specimens according to DIN 53281ff Stainless steel rings for tests according to EN ISO 10563 Spacers for standard joints according to ISO 11600 Spacers for elongation test according to ISO 11600, made of aluminum or PMMA in various % values Feed mechanisms

You can also choose from a large portfolio of customizing options for glass as basic material. A wide range of different dimensions and glass grades are available to you. All glass test specimens are offered in various edge qualities. Be it with polished edge, deburred, planed or with non-machined cutting edge: we are guided by your requirements. Would you like to order customized finishing, such as sandblasting, tin coat marks, or drilled holes? We will also be happy to fulfill this request.

Know-how for special applications There are applications with very special requirements for the heat exchanger. Due to its decades of experience, Anthermo GmbH has the necessary know-how to be able to build special heat exchangers for special applications. So every year we build numerous heat exchangers that are a bit off the standard. Dimensioning with EDP programs With the help of EDP programs, Anthermo GmbH is also able to dimension and technically design special heat exchangers. The technical design and dimensioning is strictly based on the specifications and requirements of the customer. After the design, a three-dimensional CAD model is created. The CAD drawing approved by the customer forms the basis for production with the most modern IT-supported production systems.

* High-temperature heat exchangers * Gland steam condensers

As a contract manufacturer and contract filler, we offer our customers a large and varied range of industrial care products. From wax release agents and basic cleaning agents to special cleaning and cold cleaning agents, floor oils or Chromoblitz-emulsions and sweeping shavings: This product variety of industrial care products meets almost every customer’s wish and need. In addition, what may have existed up to now only as an idea of the customer can be specially developed by the knowledge and innovative strengths of Wachsfabrik Segeberg GmbH. Basic cleaning agents: Flexible surfactants Basic cleaning agents are based on surfactants, which are either water- or solvent-based, depending on the desired application. These industrial care products have a degreasing and dewaxing effect. Floor oils: Impregnation of industrial floors Special floor oils are used to make industrial floors less sensitive to dust and dirt and to impregnate them.

The product possibilities and areas of application for cleaners are almost infinite. As a manufacturer of cleaning agents, Wachsfabrik Segeberg GmbH offers the individual production of window cleaners and sanitary cleaning agents, organic, vinegar, citrus, plexiglass, carpet and all-purpose cleaners, but also neutral soap or special cleaners such as silicone, rim or engine cleaners. Strict quality control and highly effective substances guarantee an optimal performance of the surfactants for precise cleaning, care and protection. Wachsfabrik Segeberg GmbH attaches great importance to substances that are harmless to health and to production mechanisms that are environmentally friendly.

The machine structure with solid base plate is extremely compact and stable. All necessary components are integrated in the machine housing: mechanical axes, pneumatic components, control with drive electronics and mounted 12 "touch display. Depending on the desired version, the F-Décor 305 can produce surface patterns like circular grainings, côtes de Genève, engravings or decorative millings on mechanical watch parts. The machine guarantees high precision and high productivity. The F-Decor 305 is delivered ready for connection with either 1 or 2 working spindles.

At TRADIUM, praseodymium is available in the following forms for industrial use: - Praseodymium metal - Praseodymium oxide Your point of contact for praseodymium is: Jan Giese Phone: +49 (0)69 50 50 250 - 237 We are looking forward to hearing from you!

At TRADIUM, bismuth metal is available in the following shapes for industrial supplies: - Bismuth granules, ingots, metal needles - Bismuth powder - Bismuth oxide Your point of contact for bismuth is: Frank Meier Phone: +49 (0)69 50 50 250 - 234 We are looking forward to hearing from you!

At TRADIUM, rhenium metall is available in the following forms for industrial use: - Rhenium powder - Rhenium pellets - Ammonium perrhenate Your point of contact for rhenium is: Frank Meier Phone: +49 (0)69 50 50 250 - 234 We are looking forward to hearing from you!

Do you have individual requirements for your laser processing center that our standard laser system of the LS series cannot meet? We develop together with our customers from stand-alone systems to integration into existing lines. In doing so, system know-how meets automation and laser technology: - robot solutions - portal variants - rotary table machines - sliding table systems - scanner solutions - integrated solutions based on VARIOMODUL® or, - at your request, on standard laser machines of the LS series For further information please take a look at our homepage.