Single valves - Import export

The GEMÜ SUMONDO® single-use diaphragm valve consists of a diaphragm valve body and a manual or pneumatic operator. The single-use diaphragm valve body has an internally welded diaphragm. The single-use diaphragm valve body is fastened to the operator using a clamp. The valve body and the operator are locked using a defined closing and opening procedure. After use, the single-use diaphragm valve body and its diaphragm can be removed from the operator and disposed of. The operator can be used multiple times and remains in the plant. — Tried and tested actuator design — Impact resistant, corrosion resistant — The diaphragm valve body meets the purity requirements of the pharmaceutical industry (USP 85, USP 788) — Integral optical position indicator — Validation Guide on request — Gamma-sterilizable valve body

Our 15 mm valve series type VA. Valves controlled electrically and pneumatically, completely in aluminium. Available as a single valve or on modular manifolds for maximum flexibility. Core items: Reduced dimensions (15mm) Low power consumption (1 W) Modern design and compactness, for easy installation. Insensitive to pollution. Solid metal construction to ensure long runtime even in demanding environments Flexibility: The valve can be easily wall mounted, manifold mounted and multipolar connection units 3 different connection types LED display manual override Connection strips with exclusive modular system

Category Hydraulic systems, valves and components / Valves / Pipeline valves / Load holding valves / Single-acting, control intern / Housing steel Product number supplier 468013602

The BEV-F is a single-stage valve offering only the function of the second ventilation stage (fine ventilation) provided by the two-stage valve (BEV-GF). For ventilation quantities of 20 to 40 m3/h. Specific applications include high points which are under hydrostatic pressure even when the pump is shut down due to the height variation involved, and where no coarse ventilation is required, as well as at high points with low flow quantities. Type F (fine ventilation): Air escapes through this valve, and collected gases cause it to open once again, including under operating pressure, until the medium continues to flow and close the valve again. Installed at high points which are under hydrostatic pressure even when the pump is shut down due to the height variation involved, and where no coarse ventilation is required. Installed at high points of pressure lines with low flow quantities.

The diaphragm dosing pumps in the MEMDOS MR series have been developed for a wide range of applications in dosing technology. They are ideal for use in industry, process engineering, water treatment and waste water treatment. Features: . Robust dosing head: Made of PP and stainless steel for high durability and longevity. . Precise dosing: Double ball valves (up to MR 290) and spring-loaded flat-seat valves (from MR 290), optional spring-loaded single ball valves. . Safety: Separation chamber with drainage tube between dosing head and gearbox protects against leaks. . Flexible stroke adjustment: Can be adjusted manually or electrically (ATE). Optional extensions: . Dual dosing pumps for increased performance. . Stroke counting with inductive sensor for precise batch processes. . Frequency inverter control for variable control.

electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC protective cover filterregulatorlubricator to clean and lubricate the supply air manual on/off valve single/double band adaptor for surfacecritical materials telescopic guide for thin wire precision stock guide for thin materials special grippers for plate or profile materials mounting bracket with height adjustment via slotted holes heightadjustable base frames pullthru straighteners for strip and wire electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC complex electrical control units protective cover filterregulatorlubricator to clean and lubricate the supply air manual on/off valve

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC protective cover filterregulatorlubricator to clean and lubricate the supply air manual on/off valve single/double band adaptor for surfacecritical materials telescopic guide for thin wire precision stock guide for thin materials special grippers for plate or profile materials mounting bracket with height adjustment via slotted holes heightadjustable base frames pullthru straighteners for strip and wire electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC complex electrical control units protective cover filterregulatorlubricator to clean and lubricate the supply air

The BEV-G is a single-stage valve offering only the function of the first ventilation stage (coarse ventilation) provided by the two-stage valve (BEV-GF). It is not necessary to coordinate the valve to the working pressure in the first ventilation stage, since coarse ventilation is always closed under pressure. Type G (coarse ventilation): The air escapes through this valve until the medium closes it as it continues to flow. The valve remains closed under operating pressure. Ventilation of individual sections in sloped pressure lines, especially as a low pressure safety feature Quick ventilation of high points if fine ventilation is not required (short pump run times)

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

This perfectly constructed machine can be also fitted at the front with a pair of high-performance supports instead of a single one and is, therefore, the ideal tool for extreme and long-term use. It is nevertheless light and sits snugly in your hand. Due to the high speed of this grinder it creates a very clean pattern, which makes it ideal for fine grinding, milling and engraving jobs. The following variants of the machine are available: Support: Single or pair Valve: Rotary or lever valve Exhaust air direction: Backwards or forwards

Gauge Isolator Valves SWS-S1 (Single Station) ▪ Effective protection of pressure gauges against overload caused by pressure peaks ▪ Suitable for panel installation ▪ Push button to read and turn to lock ▪ Multilingual instructions printed on face plate ▪ Maximum working pressure: 400 bar / 5800 PSI Gauge Isolator Valves SWS-A1/A2 (Single Station) ▪ Effective protection of pressure gauges against overload caused by pressure peaks ▪ Designed for in-line assembly (type A1) or 90° assembly (type A2) with female BSP / male BSPT, female NPT / male NPT or female NPT / male SAE threaded connections ▪ Panel mounting nuts available on request ▪ Rotating swivel nut allows for accurate orientation of the pressure gauge ▪ Maximum working pressure: 400 bar / 5800 PSI

The number of HPAPI (High Potency Active Pharmaceutical Ingredient) has been continuously increasing over the past view years. At the same time, the manufacturing industry wants more flexibility in production to respond faster and more accurately to needs and changing demand. The complete IBC cleaning and drying solution for substances with high hazard classification up to OEB 5 for pharmaceutical industries is at the end of all process steps in pharmaceutical solids production and meets this requirement including full validation. Validated interior cleaning adapted to space and product Technical description suitable for high containment containment Valve system with Split Butterfly Valves single-stage washing principle, no water circulation to avoid cross-contamination hydrokinetic head for cleaning (container) inner surfaces hydrokinetic head for cleaning bottom valves recipe controlled system with automatic controls, sampling, batch reporting and security access drying with...

Whenever several valves are to be used in a confined space and with minimal piping, a module or strip solution is recommended. In contrast to single piping, the expense for valve piping, fittings, working time, and possible leaks is almost cut in half.

The Hartmann Twin Ball Valve (TBV) provides a double line barrier and enables a significant increase of safety without much effort. Designed for applications with especially high safety requirements, the TBV consists of two integrated ball valves, which can be equipped with two independent barriers each. Thereby the safety can be raised by factor 4 compared to a standard valve. With the Double Isolation and Bleed function each ball valve seals both at the upstream and downstream side. With the so-called „studded“-design, meaning a closed flange form, the valve has the length of a single standard valve and affords a compact and economic alternative for the application of multiple valves. The TBV comprises – like all Hartmann valves – a pure metal-to-metal sealing system between ball and seat ring. With this sealing system leakage rates A, respectively 0, can be fulfilled. Furthermore, it is characterized by an outstanding longevity and low maintenance requirements.

The CETATEST 715 series includes fully automatic working leak tester for the detection of untight parts within the cycle time of the production process. The leak tester uses a gauge pressure sensor and has a large measurement range. Therefore the CETATEST 715 is especially qualified for the simple testing of parts with large leakages, as they occur in the testing of valves. The test types "sealed component" and "dynamic pressure" can also be integrated. Typical applications: Testing of sanitary fittings, plastic welds, check valves Operating methods: Single-channel operation, two-channel operation The measurements in two-channel operation are synchronous. Measurement ranges: Max. +/-10,000 Pa Result units: Pa, hPa, PSI, Pa/s, hPa/s, mbar*l/s, ml/min, ml/h, l/min, l/h, mmHg, mmWs, Torr Pressure ranges: -1 bar, 200 mbar, 1 bar, 6 bar, 10 bar, 16 bar, 20 bar, negative gauge pressure and positive gauge pressure ranges can be combined.