Sheets and plates - Import export

Shims, or shims sheets / spacer sheets / shims, are used to compensate for tolerances that occur in manufacturing. In this way, components and products in fixture construction, on machines and in automobiles can be compensated for easily, cost-effectively and with high precision.

S235 JRG2 S355 J2G3 sheet plates S355MC

Design: Chrome nickel steel 18/10. With on-off switch and control lamp. E-Connection: 26046: 230 V – 0,6 kW. Thermostat fixed at max. 80 °C. 26053: 230 V – 0,5 kW. Continuously adjustable temperature control by thermostat.

we process thin sheets, heavy plate, wear-resistant sheet and plate. aluminium sheets, stainless steel sheets, copper sheets, brass sheets and much more, with formates from 3000 to 8000 mm (118" to 315"), with thickness 1 mm – 180 mm (0,039" to 7") welded sheet metal structures, aluminium constructions, industrial profiles

Temperation of fluids Pillow plates are used everywhere where liquids must be temperated. In dependence of application the liquids can be cooled or heated. Cause of this wide range of applications pillow plates are used in the process industry, in the cooling industry and in a lot of other industries. Pillow plates are also know as heat exchanger plates, evaporator plates, cooling plates /sheets and thermo plates / sheets. Pillow plates as air-/water-heat exchanger Additionally to the temperation of liquids pillow plates are also used as air-/liquid heat exchangers. In case of polluted or wasted air and if there are high demands for cleaning, more and more pillow plates are used as air-/water-heat exchanger. The large exchange surface and the good possibilities for cleaning are important features for this type of heat exchanger.

At TRADIUM, hafnium is available in the following forms for industrial supplies: - Hafnium metal: rods, pieces, sponge, ingots, round bars, wires, sheets, plates - Hafnium hydride powder - Hafnium oxide - Semifinished and finished products and manufacturing according to specifications Your point of contact for hafnium is: Frank Meier Phone: +49 (0)69 50 50 250 - 234 We are looking forward to hearing from you!

Schnelldorfer CORNERWELD seam welding machines have been designed to weld sheet metal plates in a 90° joint. The precision clamping system with inert gas coverage and advanced OEM control package precisely controls the welding sequence and weld parameters, resulting in the perfect weld for your corners. CORNERWELD applications include welded corners for food, medical equipment, HVAC drip pans, electrical enclosures, and laboratory furniture. Complex inward and outward flanges can be accommodated with custom made tooling pieces. A wide range of materials can be welded, including Stainless Steel, Carbon Steel and Aluminium. Complete welded parts do not require any costly grinding, polishing or blending thus greatly saving on manufacturing costs.

Firm hold in any position Demag DBM battery magnets are the ideal solution wherever you need to transport magnetisable loads safely and efficiently. They can be used independently of a power supply and are therefore highly versatile. Whether used as stationary units with wall or slewing jib cranes or as mobile equipment with cranes or forklift trucks, Demag DBM battery magnets allow you to transport loads weighing up to 4 tons easily and safely from A to B. DBM battery magnet -Universal application -Compact design -High safety and reliability -High load capacity -Loads are always safely picked up -Automatic charging control Universal application -Outdoor operation also possible with IP43 enclosure (power source, charger and control elements combined into one unit) -Single metal sheets or plates can be separated from the load by flicking the toggle switch -High load capacities

max. size 36 x 52 cm age 1988 single sheet feeder conventional dampening quick plate clamping bar dry sprayer + version numbering unit N+P shown totalizer: approx. 20 mill. impressions Delivery time: immediately from stock Ref: HE230102A Please ask for price. We ship and install worldwide!

Iron and steel represent a fundamental pillar in industrial production. Precision in the production process of metal plates, sheets and coils is crucial to the efficient use of scarce resources and economic success. As a manufacturer of measuring systems for the steel industry based on optical sensors, Micro-Epsilon offers a comprehensive portfolio without radioactivity that ensures More Precision in all applications regardless of complexity and material properties. With optimized sensor technology tailored to the respective application, innovative mechanical design, as well as cooling and protective devices, the systems meet the challenges of the processes. The high-performance signal processing and analysis software makes the systems the leading optical measuring systems on the market which detect the following parameters

thicknessGAUGE sensor systems are used for precise thickness measurements of strip materials, plates and sheets up to 50 mm. Several models with different sensor types, measuring ranges and measuring widths enable inline thickness measurements of different materials and surfaces based on an unmatched price/performance ratio. This fully assembled system comprises a stable frame on which two optical distance sensors are fixed, which detect the thickness of the measuring object according to the difference principle. The sensors are perfectly aligned to each other in terms of their mounting condition. Furthermore, thickness calibration at the factory enables high precision thickness measurements.

In the aerospace industry we specialize in the production of rolled aluminum plate and sheet materials for fuselage and wing structure components according to standard or customized specifications. The aerospace industry is building new aircraft to accommodate a growing number of air passengers and to replace older, less efficient planes with newer, more fuel-efficient models. Aluminum offers a high strength-to-weight ratio, energy efficiency, and high tolerance to extreme temperatures- making it an ideal material for the manufacturing of aircraft. It can also be recycled repeatedly, making it a good choice as manufacturers pursue sustainability initiatives. We have introduced new low-density alloys that represent an innovative step forward for aluminum in aerospace. Weight-savings from these new alloys translate into fuel efficiency and lower operating costs for the airline industry.

Up to 60 rivets per minute! – Endorsed by major customers! GESIPA® speed rivets are a cost-effective alternative to automation. Speed rivet technology is a joining method that requires access from only one side and which enables fast cycle times thanks to the preloaded rivets and automatic feed. Advantages • Large grip range • Reduced variation • Optimum hole filling capabilities and bearing stress • Ideally suited for transferring shear strengths with moderate clamping force • Ideal for: — LED light strips — Electronic/pcb assembly — Lightweight sheet metal structures — PC housings — Rating plates — Blind holes

Quick assembly without tools. Suitable for combining sheets, plates etc. Material: PA 6 Colours: last digits 000 = natural last digits 002 = grey ~RAL 7000 last digits 087 = blue ~RAL 5017 last digits 114 = black ~RAL 9005 last digits 124 = red ~RAL 3020 last digits 132 = yellow ~RAL 1023 Two parts are needed for every connection! For thin clamping width (from 0.9 mm) you have to use a snap-ring. Additional information: Dimensions A 5.5 mm and part no. 0960610 = slotted head. You get the best clamping effect if the hole diameter matches dimension A.

Vacuum lifting devices standard are for the horizontal handling of plates. Transportation auf sheet metal, plastic plates, covered wooden plates or glass panes up to 2000 kg. Loading and unloading of machine tools. All AERO-LIFT vacuum lifing devices are build according the actually safety regulations EN13155. Standard lifting device AERO 350-6R Functionality and features Die Vakuumerzeugung der Vakuumheber geschieht durch wartungsarme trockenlaufende Drehschieberpumpen , ölumlaufgeschmierte Vakuumpumpen mit sehr hohem Endvakuum, druckluftbetriebene leistungsstarke Vakuumejektoren beim AERO-LIGHT oder Vakuumgebläse mit Sicherheitsnachlaufschwungmasse bei luftdurchlässigen Transportgütern. Alle AERO-LIFT-Vakuumheber haben eine nach EN13155 vorgeschriebene automatisch...

This guard rail, which is made of aluminium and stainless steel, is simply riveted onto the profiles of a sandwich roof surface. This high-quality, collective protection system comes with a set of watertight blind rivets which have been awarded national technical approval. The handrail is 1100 mm high. EN 13374:2013, A Distance between the posts: Max. 2.50 m Specially designed for sandwich and trapezoidal sheeting (positive/negative) For steel plating ≥ 0.45 mm Distance between the holes:: 180/250 mm or 280/333 mm

This stainless steel anchorage point (Ø 16 mm) for aluminium sandwich sheeting is equipped with a base plate which can be supplied in custom sizes (standard: 370 x 370 mm). It is easily installed using the 6 special toggle bolts supplied. EN 795:2012, A + CEN/TS 16415:2013 Sandwich and trapezoidal sheeting (positive/negative) Aluminium ≥ 0.8 mm Distance between the rows of pre-drilled holes: 335 mm Installation materials included Upgrade with a supporting tube for usage as an end or corner post in a lifeline system

This extremely flat stainless steel anchor does not get in the way when stacking containers. Combine 2 ABS-Lock X-Flat devices to create a temporary lifeline system. The anchor is riveted onto the subsurface from above using 14 watertight blind rivets. The integrated sealant tape prevents water from seeping in. EN 795:2012, A + CEN/TS 16415:2017 Specially designed for sandwich and trapezoidal sheeting (positive/negative) For steel plating ≥ 0.5 mm Distance between the rows of pre-drilled holes: 180-250mm / 280-333 mm Installation materials included

This stainless anchorage point can be installed on a range of different seams and is available in two models. Simply install this anchorage device from above using the stainless steel blind rivets provided. We also supply models for usage as an intermediate bracket or T-junction in a lifeline system. EN 795:2012, A + CEN/TS 16415:2017 Sandwich and trapezoidal sheeting (cold roofs) For steel plating ≥ 0.45 mm; Aluminium ≥ 0.8 mm Distance between the holes: 180-250 mm / 280-333 mm Installation materials included

In choosing a Betonbau aluminium door, you have selected a secure solution that will effectively protect your technical building against forced entry and reliably resist pressure loads and stress such as encountered as a result of technical interference (e.g. accidental arcing). High-strength, weather-resistant materials carefully machined in our own metal production facility ensure that the outlay for care and maintenance is kept to a minimum Designs: Standard surface: Anodised aluminium E6 EV 1 silver Single and double-leaf interior door hinge plates Smooth sheet metal filler Station lock with emergency exit function conforming to DIN VDE 0101 and 3-point locking Prepared for one or two profile cylinders Door arrester Earthing strip M 12 earthing connection Options: Galvanised steel design Reduced or removable threshold Sheet metal filler with barleycorn structure Anodised, painted or powder-coated surface Choice of colours Thermal and sound insulation Hydraulic door closer...

Copper sheets and plates

Graf-Flex-SP2 seals The Graf-Flex-SP-2 seal is a pointed sheet seal produced by a special process. The design of the seal is based on empirical values. Numerous tests have been carried out to verify the adhesion between the pointed sheet and the graphite coating as well as the surface quality, and thus the adhesion between the coating and the flange surface.The first phase of these tests led to special perforation of the carrier plate in terms of the geometric shape of the hole and hole distribution. The second phase took account of the adhesion of the seal to the surface of the flange and defined the surface quality of the graphite material. The values found in this way were transferred to the mass production process using a special procedure. . This consisted of a specially produced perforated roller for penetrating the sheet together with a special surface roller. Finally, the graphite coating is applied to the defined surface in the calendering process.

Our high-performance machining oil SENTOS V-LR3 has a somewhat higher lubricity compared to our SURVOS products. This product also consists of volatile components that evaporate down to a lubrication residue of 3%. All components are approved according to USA-FDA §178.3910 as surface residues for the manufacture of food packaging. This makes our SENTOS optimally suited as a lubricant and drawing agent for punching and deep drawing (even with high contact pressures), for cutting and perforation of sheets (aluminium, steel, copper, brass, zinc-plated), including transformer and electric sheets, as well as for painted and coated sheets in particular. In addition, our SENTOS is especially well suited for cold profiling, bending and embossing, as a cooling lubricant for sawing, drilling, milling and engraving as well as a lubricant for cutting non-metallic materials.

Tantalum and niobium combine high corrosion resistance with good mechanical properties. We supply them as is-materials or as semi-finished goods – e.g. sheets and plates, bars, wires and billets. Without superconductive niobium-titanium, the most modern medical diagnostic instrument – the Magnetic Resonance Imaging Scanner – would not be possible. Niobium-tantalum plays a major role in modern material analytics. Further application areas for niobium-titanium and niobium-tantalum are magnets in particle physics research centres, as well as energy generation. Molybdenum is an important raw material in the photovoltaic industry.