Results for
TRADIUM GMBH
Germany
At TRADIUM, tantalum is available in the following forms for industrial use: - Tantalum pieces and sheets - Semi-finished products Your point of contact for tantalum is: Frank Meier Phone: +49 (0)69 50 50 250 - 234 We are looking forward to hearing from you!
Request for a quoteTRADIUM GMBH
Germany
At TRADIUM, iridium is available in the following forms for industrial use: - Iridium sponge and powder - Iridium in various inorganic compounds - Iridium alloys and semi-finished products Your point of contact for iridium from TRADIUM is: Philipp Goetzl-Mamba Phone: +49 (0)69 50 50 250 - 236 We are looking forward to hearing from you!
Request for a quoteTRADIUM GMBH
Germany
At TRADIUM, titanium is available in the following forms for industrial use: - Titanium metal powder - Titanium hydride powder - Titanium sponge - Titanium semi-finished products Your point of contact for titanium is: Thomas Grob Phone: +49 (0)69 50 50 250 - 233 We are looking forward to hearing from you!
Request for a quoteTRADIUM GMBH
Germany
At TRADIUM, palladium is available in the following forms for industrial use: - Palladium sponge - Palladium in various inorganic and organic compounds - Palladium ingots, sheets, and semi-finished products Your point of contact for palladium from TRADIUM is: Philipp Goetzl-Mamba Phone: +49 (0)69 50 50 250 - 236 We are looking forward to hearing from you!
Request for a quoteMAHLO GMBH & CO. KG
Germany
Portable moisture meter The Textometer DMB is a mobile handy device for measuring moisture on textile webs and bobbins on a wide variety of versions. It determines the moisture content of raw materials, semi-finished products and finished products precisely and quickly.
Request for a quoteEMBRO GMBH
Germany
The semi-finished products manufactured by Embro GmbH are optionally available with an electrical connection. In addition to the many possibilities of placing different elements on carrier materials with special embroidery processes, Embro offers splicing or soldering techniques for perfect and cost-effective connections. The parts are crimped or soldered together as standard. The introduction of thermal switches, NTC or other cable solutions is also no problem. Special connector solutions can also be implemented. This means that the textile semi-finished products are plug & play ready upon delivery. #service #contacting #b2b
Request for a quoteTRADIUM GMBH
Germany
At TRADIUM, platinum is available in the following forms for industrial use: - Platinum sponge, ingots, and sheets - Platinum in various organic and inorganic compounds - Platinum semi-finished products Your point of contact for platinum from TRADIUM is: Philipp Goetzl-Mamba Phone: +49 (0)69 50 50 250 - 236 We are looking forward to hearing from you!
Request for a quoteEWG E. WAGENER GMBH
Germany
We are your reliable partner for the procurement and processing of technical ceramics, e.g. Oxide ceramics (alumina, magnesia, zirconium oxide) and non-oxide ceramics (with carbide or nitride). Technical ceramics - also called industrial ceramics or industrial ceramics - have unique material properties and are therefore one of the most powerful materials available. We offer the following ceramic materials and parts: Semi-finished products: Rods, pipes, flat material, etc. Laboratory parts: bowls, crucibles, etc. Finished parts: Drawing parts of all kinds according to customer requirements
Request for a quoteEMBRO GMBH
Germany
In order to meet the demands for robustness and efficient heat output, we have embroidered the heating element on a glass mesh fabric carrier material. Between the meandering arrangement of the heating strands, we integrate a recess for the temperature switch in the CAD layout. In addition, a second wire is laid concurrently as a PTC thermistor for the electrical connection of the safety switch. After the technical embroidery process, the safety switch is inserted and connected by our company’s respective department. Each prefabricated element is tested for functionality and performance in the final inspection and is delivered to the customer after passing the test. As a semi-finished product, the infrared heating element on glass mesh fabric can be further processed by the customer, e.g. in connection with silicone, rubber or epoxy resin.
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Highly adhesive lubrication of moving parts, e.g. valve spindles, piston rods, wire cables, drag cables, drive and conveyor chains, hinges and guides, at highly corrosive conditions in food processing technology Temporary corrosion protection of ferrous and non-ferrous metals, in particular in highly corrosive atmospheres, such as industrial atmospheres, outdoor weathering under roofs of semi-finished products and finished products Shipping protection of packed and unpacked machines and machine parts, apparatuses and equipment goods under extreme climatic conditions Advantages and benefits Highly adhesive oil with very good creep and lubrication properties Optimal corrosion protection through high effectiveness of the corrosion protection additive After the solvent has dried, forms a transparent, highly adhesive oil film Contains non-ferrous metal deactivator NSF H1-registered Also available as spray version OKS 3601
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Corrosion protection of metal semi-finished products and spare parts during transportation and storage Temporary storage of forms, machines and tools in production and maintenance Advantages and benefits Environmentally friendly VOC-free product on a water base Workplace-friendly and not detrimental to health, since emissions (vapours) from volatile organic compounds do not arise during application Setting of the layer thickness for optimal corrosion protection through dilution with water possible In case of mass coating, pre-heating of the parts to accelerate drying possible Dry wax film fast to handling Can be removed easily with warm water and water-based cleaners, such as OKS 2650 Good adhesion on metal surfaces Neutral with respect to most plastics and paints
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Highly adhesive lubrication of moving parts, e.g. valve spindles, piston rods, wire cables, drag cables, drive and conveyor chains, hinges and guides, at highly corrosive conditions in food processing technology Temporary corrosion protection of ferrous and non-ferrous metals, in particular in highly corrosive atmospheres, such as industrial atmospheres, outdoor weathering under roofs of semi-finished products and finished products Shipping protection of packed and unpacked machines and machine parts, apparatuses and equipment goods under extreme climatic conditions Advantages and benefits Highly adhesive oil with very good creep and lubrication properties Optimal corrosion protection through high effectiveness of the corrosion protection additive After the solvent has dried, forms a transparent, highly adhesive oil film Contains non-ferrous metal deactivator NSF H1-registered
Request for a quoteSCHMIDT ZERSPANUNGSTECHNIK GMBH
Germany
SCHMIDT Zerspanungstechnik will meet even the most demanding customer requirements SCHMIDT Zerspanungstechnik sets high standards in terms of precision and quality when it comes to turning too: Our modern machinery includes various CNC lathes that boast the latest technology. The features of our high-precision machinery allows us as a machining specialist for large parts to produce work pieces with a swing of up to 1,100 mm and turning lengths of up to 4,500 mm and achieve the required surface finish with ease. Our lathes have roller burnishing and grinding tools so that your work pieces and semi-finished products can be individually customised to your specifications and special finishes realised. As a machining specialist for large parts, we rely on top quality and reliable processes when it comes to turning too.
Request for a quoteSCHMIDT ZERSPANUNGSTECHNIK
Germany
SCHMIDT Zerspanungstechnik will meet even the most demanding customer requirements SCHMIDT Zerspanungstechnik sets high standards in terms of precision and quality when it comes to turning too: Our modern machinery includes various CNC lathes that boast the latest technology. The features of our high-precision machinery allows us as a machining specialist for large parts to produce work pieces with a swing of up to 1,100 mm and turning lengths of up to 4,500 mm and achieve the required surface finish with ease. Our lathes have roller burnishing and grinding tools so that your work pieces and semi-finished products can be individually customised to your specifications and special finishes realised. As a machining specialist for large parts, we rely on top quality and reliable processes when it comes to turning too.
Request for a quoteFUCHS GMBH & CO. KG
Germany
Whether they are oil marinades, emulsion marinades, starch marinades or dry marinades (rubs), and with or without binder compounds, our products are precisely tailored to meet the various challenges of preparing meat products, frozen products and semi-finished convenience dishes. From exotic to classic and traditional, flavour, appearance and haptics are always delightfully harmonised. Our variants in summary: FoxMaro® – oil marinades FoxMare® – emulsion marinades FoxMadry® – dry marinades FoxMaris® – starch marinades Brand new: FoxMare marinade with Skyr Our five finely tuned emulsion marinades with Skyr includes 28% of Skyr and are available for pork, beef, poultry, fish and vegetables. Moreover Skyr is a very good ingredient for dips. The proportion of Skyr provides taste of freshness and an extra boost of protein. In combination with the emulsion marinades, fermented Skyr makes meat, fish and vegetables tender and is also low in calories.
Request for a quoteFRIMO GROUP GMBH
Germany
The combination of multiple technologies/procedures in one step is called OneShot technology. Semi-finished products (e.g. renewable raw materials such as natural fibers) and decorative materials (e.g. textiles) have to be handled in one production step to finish a component, such as a door panel. FRIMO has developed a modular system that allows for simple and customized configuration of a OneShot plant with all necessary tools. The following units can be integrated into such a plant: feeding station, heating station, calibrating station, material assembly station, press with OneShot tool, part-removal station.
Request for a quoteBIEGLO GMBH
Germany
BIEGLO's sales portfolio for PEI contains also sheets from 8mm to 100mm as well as, PEI thin films below 1mm thickness are also available and the maximum width is 1200mm for sheets and film. Polyetherimide is an amorphous thermoplastic and part of the polyimide family. It has excellent dimensional accuracy over a wide temperature range and has low thermal expansion. PEI is naturally flame retardant and has a fire rating of UL94 V-0. The most common applications of PEI are in the food and beverage industry, pharmaceutical and electronics industry as well as precision engineering.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BIEGLO GMBH
Germany
BIEGLO is the official distributor of Saint Gobain Performance Plastics for the Meldin 7000 product line semi-finished products. Our polyimide semi-finished products meet the highest demands of various industries, such as the aerospace or the automotive industry. The polyimide semi-finished products are available as solid rods or sheets. Tubes can be produced as short, direct formed pieces. Polyimide semi-finished products are available in various compounds, for example with PTFE or graphite for better coefficients of friction. Polyimide sheets are available in the standard size 305mm x 305mm and a thickness of 1.6mm up to 50.8mm. Polyimide rods have a standard length of 965mm. The diameters of the solid bars are distributed from 6.3mm to 82.5mm.
Request for a quoteBIEGLO GMBH
Germany
BIEGLO can offer PEEK granulates in various viscosities. It can be used for a variety of applications: semi-finished product extrusion, injection molding, compounding, filament and film extrusion, coatings. Our CoPEEK 012G is high viscous, unreinforced PEEK for extrusion and injection molding, thus it is the standard type for the production of semi-finished products. CoPEEK 021G is medium viscous, unreinforced PEEK for injection molding. But it can also be extruded for the production of films and filaments. CoPEEK 085G is low viscous, unreinforced PEEK for the extrusion of films and filaments. It is also used as the basis for compounds and composites. CoPEEK 125G is very low viscous, unreinforced PEEK for the injection molding of thin-walled, complex components. It is also suitable for the production of highly filled compounds.
Request for a quoteBIEGLO GMBH
Germany
BIEGLO can offer PEEK powders in various viscosities. It can be used for a variety of applications: semi-finished product extrusion, injection molding, compounding, filament and film extrusion, coatings. Our CoPEEK 012P is a high viscous, unreinforced PEEK for extrusion and injection molding, thus it is the standard type for the production of semi-finished products. CoPEEK 021P is medium viscous, unreinforced PEEK for injection molding. But it can also be extruded for the production of films and filaments. CoPEEK 085P is low viscous, unreinforced PEEK for the extrusion of films and filaments. It is also used as the basis for compounds and composites. Our CoPEEK can be processed on machines for thermoplastics without any problems. We recommend a processing temperature of 360 °C to 380 °C. BIEGLO CoPEEK is ISO 10993 certified for medical applications and also has FDA certification.
Request for a quoteBIEGLO GMBH
Germany
BIEGLO can offer a variety of PEEK compounds, both as raw material and as semi-finished product. PEEK compounds can be supplied with carbon or glass fibers as well as with PTFE and tribological compounds with a mix of PEEK, PTFE, carbon fibers and graphite. In addition, PEEK color compounds can also be supplied. PEEK-CF30 impresses with its outstanding mechanical and thermal properties. The carbon fibers provide increased stiffness, creep resistance and better thermal conductivity. Furthermore, PEEK-CF30 has exceptional resistance to hydrolysis in boiling water or hot steam. PEEK-GF30 impresses with its improved mechanical strength and high rigidity. In addition, the creep resistance and dimensional stability is increased. The glass fibers provide increased life in high static and high temperature applications over a long period of time. PEEK-GF30 does not dissolve in common solvents and resists high gamma rays.
Request for a quoteIBK WIESEHAHN GMBH
Germany
Technical plastics for industry are a further speciality of IBK. We produce plastic parts to your specifications (ISO, CAD, drawing) for all temperature ranges and with specific chemical resistance. Whether unusual, complex or just simple forms – we turn, inject, saw, drill or mill, whatever you require. We supply semi-finished products as round bars, plates, pipes, rods, profiles or individual cuts, rolls, rollers or wheels with or without coating. Furthermore finished parts, such as protective systems for safety at the workplace in electronic applications. We process all types of plastic, from polyamide to hard PVC through to GRP/FRP. Semi-finished parts: Plates, Blocks, Full rods, Hollow rods, Pipes, Cut pieces Finished parts Cut and processed (turned, milled, drilled etc.) to drawing, sketch or sample, such as - Wheels, Rollers, Bearing bushes, Thrust rings, Bands, Sleeves, Strips
Request for a quoteFTK FÖRDERBAND TECHNIK KILIAN GMBH
Germany
We offer PU sheets in the dimensions 3000 x 1000 mm and thicknesses from 1 to 50 mm. Of course, special dimensions are also possible. PU round bars are available in the dimensions 70 °, 80 ° or 90 ° Shore A, dimensions 8 200mm x 1000m. Intermediate sizes can also be requested here. In addition to the extensive range of semi finished products such as plates, round rods, hollow rods and spring elements, molded parts with and without metal are also included in the scope of delivery. Mechanical rework such as water jetting, milling, drilling, sawing, punching and welding offers flexible potential from individual parts to series production. Possible Shore hardnesses from 55 ° 95 ° Shore A.
Request for a quoteSERIN GMBH
Germany
*Bopp Film Clear, metalised, Opaque Thickness: Between 15-50 micron *PET Film Silicone coated and uncoated *CPP, OPP, PP, PE *MET PET, PET/ALU/PE
Request for a quoteLECHMANN ENGINEERING GMBH
Germany
Hard anodizing (or hard coating) is the electrolytic oxidation of semi-finished aluminum products, which improves a surface in such a way that high demands are made in terms of wear resistance and high corrosion protection. At temperatures of 0°C, alloy-dependent layer thicknesses of up to 100 μm develop, which have a greater surface hardness than stainless steel. This ceramic-like layer is not conductive and also serves as electrical insulation. Maximum measurements 2750 x 700 x 300 mm
Request for a quoteResults for
Semi-finished products - Import exportNumber of results
26 ProductsCountries
Company type
Category