Rotary ups - Import export

Compact, modular, cost-effective, twistable up to 7,000°* Rotary movements in a very small space - 20 times round its own axis. With the very compact igus twisterband, rotations can be achieved cost-effectively with low wear and very little maintenance, even in confined spaces, whereby energy, data and media can still be supplied reliably. - 7,000°* and more rotational movement horizontally and up to 3,000° in the vertical installation position - Rotary speeds up to 180°/s possible - Compact, modular and light - Strips can be shortened as required - Minimum installation spaces, fits tightly around the rotary axis - Can be used reliably in various installation positions (horizontal, vertical, upside down) - Cost-effective - Easy filling

The twisterchain product line offers a wide range for circular movements and is available in four sizes. Modular in width and radius, therefore flexible in applications where rotary and spiral movements up to 360° and more with high loads and smooth operation are required. The twisterchain applications are available with guide trough, which has the following advantages: guidance of the energy chain, reduced abrasion of the energy chain, optimal operational smoothness, rotation angle up to 360° from stock. - Strong, high fill weights, smooth operation, weight-optimised - Rotary speeds up to 1m/s and more - Circular/spiral movements up to 360° from stock (up to 400° upon request) - Cable-friendly, smooth interior crossbars openable along the inner and outer radius - Successfully tested for over 1 million cycles in the igus laboratory

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. Extra stable, shock-absorbing steel tube frame with galvanised steel tube, exclusive stability. Carry handle with comfortable cable guide management during winding. Reel body made of special plastic with reinforced ribbed structure. Rotary handle for comfortable rolling up. The BREMAXX®-PUR cable (BQ cable) is highly resistant to abrasions, crushing, UV light, cutting and tearing. In addition, it is accid-proof, oil-resistant, wheatherproof and microbe-resistant. Remains highly flexible even at low temperature down to -40 °C. BQ cable (PUR) is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Cable length: 40 m Cable: H07BQ-F 3G1,5 Cable quality: BREMAXX®-PUR Cable colour: Orange Reel-Ø: 290 mm

For short-term use outdoors, IP 44. Extension cable reel with plug and trailing socket. Cable reel with 2 m cable for connecting to the power source. With the unique Bretec® Anti Cable Twist System for comfortable working. Reel body made from special plastic fitted to a galvanised steel tube frame. Innovative and ergonomic cable guide handle "cable pilot" for perfect cable-management during winding. Handle commutes on both sides and allows easy carrying and cable storage. For right and left handed easy to rewind. With hinged rotary handle for comfortable rolling up. The BREMAXX® cable is extremely sturdy, highly flexible even at low temperature down to -35 ºC, oil- and UV-resistant and highly abrasion-resistant. Thermal cut-out protection, indicator shows overheating or overloading. Design protected. Patent pending. Cable length: 48 + 2 m Cable: AT-N05V3V3-F 3G1,5 Cable quality: BREMAXX® Cable colour: Red Reel-Ø: 290 mm

For short-term use outdoors, IP 44. Extension cable reel with plug and trailing socket. Cable reel with 2 m cable for connecting to the power source. With the unique Bretec® Anti Cable Twist System for comfortable working. Reel body made from special plastic fitted to a galvanised steel tube frame. Innovative and ergonomic cable guide handle "cable pilot" for perfect cable-management during winding. Handle commutes on both sides and allows easy carrying and cable storage. For right and left handed easy to rewind. With hinged rotary handle for comfortable rolling up. The BREMAXX® cable is extremely sturdy, highly flexible even at low temperature down to -35 ºC, oil- and UV-resistant and highly abrasion-resistant. Thermal cut-out protection, indicator shows overheating or overloading. Design protected. Patent pending. Cable length: 23 + 2 m Cable: AT-N05V3V3-F 3G1,5 Cable quality: BREMAXX® Cable colour: Red Reel-Ø: 240 mm

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. With the unique Bretec® Anti Cable Twist System for comfortable working. Reel body made from special plastic fitted to a galvanised steel tube frame. Innovative and ergonomic cable guide handle "cable pilot" for perfect cable-management during winding. Handle commutes on both sides and allows easy carrying and cable storage. For right and left handed easy to rewind. Rotary handle for comfortable rolling up. RN cable is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Design protected. / Patent pending. Cable length: 25 m Cable: H07RN-F 3G1,5 Cable quality: Rubber-Neoprene Cable colour: Black Reel-Ø: 240 mm

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. With the perfect Quick & Easy Rewind System ROL´UP and the unique Bretec® Anti Cable Twist System. Reel body made from special plastic fitted to a galvanised steel tube frame. Innovative and ergonomic cable guide handle "cable pilot" for perfect cable-management during winding. Handle commutes on both sides and allows easy carrying and cable storage. For right and left handed easy to rewind. Rotary handle for comfortable rolling up. RN cable is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Design protected. Patent pending. Cable length: 40 m Cable: H07RN-F 3G1,5 Cable quality: Rubber-Neoprene Cable colour: Red Reel-Ø: 290 mm

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. Extra stable, shock-absorbing steel tube frame with galvanised steel tube, exclusive stability. Carry handle with comfortable cable guide management during winding. Reel body made of special plastic with reinforced ribbed structure. Rotary handle for comfortable rolling up. The BREMAXX®-PUR cable (BQ cable) is highly resistant to abrasions, crushing, UV light, cutting and tearing. In addition, it is accid-proof, oil-resistant, wheatherproof and microbe-resistant. Remains highly flexible even at low temperature down to -40 °C. BQ cable (PUR) is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Cable length: 25 m Cable: H07BQ-F 3G1,5 Cable quality: BREMAXX®-PUR Cable colour: Orange Reel-Ø: 240 mm

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. With the unique Bretec® Anti Cable Twist System for comfortable working. Reel body made from highly break-resistant, special plastic on a particularly sturdy frame. With hinged rotary handle for comfortable rolling up. RN cable is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Design Patent. Cable length: 25 m Cable: H07RN-F 3G1,5 Cable quality: Rubber-Neoprene Cable colour: Black Reel-Ø: 240 mm

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. With the perfect Quick & Easy Rewind System ROL´UP and the unique Bretec® Anti Cable Twist System. Reel body made from highly break-resistant, special plastic on a particularly sturdy frame. With hinged rotary handle for comfortable rolling up. RN cable is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Design Patent. Cable length: 40 m Cable: H07RN-F 3G1,5 Cable quality: Rubber-Neoprene Cable colour: Black Reel-Ø: 290 mm

Mechanically connected, screw-in speed encoder with square wave output signal. Cost-effective speed sensor with square wave output signal. Can be mounted directly instead of using a flexible shaft. Can be loaded with 50 mA SINK and 20 mA LOAD. High EMC protection for harsh electrical environments. For harsh environments up to IP67.

Mechanically connected, screw-in speed encoder with square wave output signal. Cost-effective speed sensor with square wave output signal. Can be mounted directly instead of using a flexible shaft. Can be loaded with 50 mA SINK and 20 mA LOAD. High EMC protection for harsh electrical environments. For harsh environments up to IP67.

Mechanically connected speed encoder with 2 square wave output signals (rotation direction detection). 60 pulses per revolution. Robust design and maintenance-free. Can be mounted in place of a tachogenerator. Can be loaded with 50 mA SINK and 20 mA LOAD. High EMC protection for harsh electrical environments. Matching processing devices can be supplied.

- Entire system solution from a single source - from construction of the laser cell to integration of your chosen KEYENCE laser - self-contained and high-performance solutions for laser labeling small batches of individual parts Versions: - Compact - Rotary - Plus - Classic - Mini - Set up: directly on a desk or mounted onto the movable base frame - Latest three-axis laser marking systems offers a laser labeling system that can be precisely adjusted to the materials and part geometries that shall be labeled Advantages of integrated optical three-axis technology: - focal point to be freely set and is especially impressive - marking laser follows various shapes - easily switch between different heights (± 21 mm = 42 mm) - mark on any shape with outstanding sharpness, including on slanted surfaces, cylinders and cones Size of the labeling field (depending on the type of laser): between 120 x 120 mm and 330 x 330 mm.

The potentiometer grinding track is embedded in a blue plastic housing and is picked up by precious metal grinders. The back of the housing is sealed dust-tight with a cover. The stainless steel drive shaft is mounted in bushings. Up to 3 potentiometer levels can be lined up one behind the other with a common wiper shaft. The levels can be adjusted against each other. Delivery is possible with or without mechanical stops. The PP 27 potentiometers are used as setpoint adjusters and as actual value and reference potentiometers in control and measuring circuits.

Recording of the angular position and revolutions by means of Hall sensors - multiturn version with absolute transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via Profibus-DP. Robust housing manufactured from seawater-proof aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal - sensor circuit consisting of ASIC with Hall elements - electrical connections via the connecting cap with threaded cable connections. The absolute encoders are designed for direct connection to the PROFIBUS-DP. The interface is implemented with the SPC3 Siemens PROFIBUS controller. The protocol corresponds to DP-Slave Class 2 functionality in accordance with Profibus profile for encoders, No. 3.062, and is described in detail in the TRD 12770 user manual. The TRD is mechanicallly and electrically compatible with the electro-optical encoder CRD.

The fully automatic rotating ring stretch wrapper Saturn S8 is our fastest ring wrapper for maximum production processes. The film is attached around the load using a rotating ring while the load remains static. • Maximum performance: Up to 160 pallets / h • Guaranteed savings of stretch film: 300 % film pre-stretching; 1 m of film becomes 4 m • Finishes without tails of film due to our efficient cut and welding device • Electronic and self-adjusting tension control depending on the profile of the load • Capable of applying bands (strips) at any height of the load • Possibility of wrapping at ground level • Possibility of applying efficient dustproof and rainproof wrappings

The space-saving models Saturn S2 and Saturn S4 are stretch wrapping machines featuring a rotary ring design where the load remains static while the film reels rotate around the load. • Entry-level performance: Up to 45 pallets / h • Guaranteed savings of stretch film: 300 % film pre-stretching; 1 m of film becomes 4 m • Finishes without tails of film due to our efficient cut and welding device • Electronic and self-adjusting tension control depending on the profile of the load • Capable of applying bands (strips) at any height of the load • Possibility of wrapping at ground level • Possibility of applying efficient dustproof and rainproof wrappings

The versatile model Saturn S6 is our best-selling and most extensible rotary ring stretch wrapper. The film reel is mounted on the ring, which rotates concentrically to the load going up and down depending on the wrapping cycle, so the load remains static. • High performance: Up to 120 pallets / h • Guaranteed savings of stretch film: 300 % film pre-stretching; 1 m of film becomes 4 m • Finishes without tails of film due to our efficient cut and welding device • Electronic and self-adjusting tension control depending on the profile of the load • Capable of applying bands (strips) at any height of the load • Possibility of wrapping at ground level • Possibility of applying efficient dustproof and rainproof wrappings

Eisele rotary lobe pumps have been constructed since 1983 and have proved themselves in the agricultural and industrial sectors. Detailed key data here: Rotary lube pump (rotary piston pump) for pumping media up to approx. 30% TS Rotary lobe with metal core and perbunan coating Drive with PTO shaft or electric motor (7.5 / 11.0 / 15.0 / 18.5 / 22.0 kW) Pumping capacity from min. 450 l/min. to 6,000 l/min (depending on the media) Pressure performance 4 - 10 bar The rotary lobes can be changed quicker and easier by opening the four ring nuts of the cover, easy as one-man operation. Vacuum and pressure side can be freely selected by re-plugging the drive shaft Standard with front side-wear plates in the pump housing and cover Mobile pump stations with one or two rotary lube pumps (pumping capacity up to 7,400 l/min.) Eisele rotary lube pumps have proved themselves in the agricultural and industrial sectors. A continuous further development guarantees a high technical standard....

The vertical grinding centres of the KEHREN Ri series have been the optimal combination of production performance and precision for years. These characteristics result from the more than 200 machines delivered worldwide, as well as the know-how and continuous further development at KEHREN. The KEHREN Ri series is characterised by the following features: — Universal application possibilities — Hard turning and milling — Wear-free linear drives in X- and C-axis — Hydrostatic bearings in the X- and C-axis — Concentricity and axial runout less than 1.5 µm — Graduation accuracy ± 1 angular second — Rotary table sizes up to >1,600 mm — Outstanding long-term accuracy and durability — Stable cast iron construction, best damping properties — Optional Y-axis — Optional double table version — Siemens Sinumeric One control — Remote diagnosis via mobile network or direct internet connection — User-defined access authorisations via RFID