Results for
DIETZ GMBH
Germany
In our new production space, we have at our disposal 30 state-of-the-art automated punching & bending machines. In addition to bent wire parts, we also produce bent strip parts here. Production to order with complex forming: Bent strip parts are produced from a broad range of materials, including for instance stainless steel, alloyed or carbon steel, brass, copper, bronze, or even K55 or K75, a specially alloyed steel. We produce complex forms and assembly parts with a strip thickness of 0.15 to 3.00 mm and with a strip width of up to 120 mm; the strip thickness will be dependent on the material. Strip materials: Carbon steels, Stainless steels, Cold-rolled strips, Slit strips. Non-ferrous strips: Brass, Copper,Bronze,Special alloys such as K55 or K75. Strip coatings: Tin-plated, Galvanised, Silver-plated, Gold-plated, Painted, Partial coatings, Special coatings on request.
Request for a quoteDIETZ GMBH
Germany
Production to order – also with special-purpose materials as required: We only produce in accordance with customer specifications. Compression springs can assume a wide variety of designs and forms. Our production facilities include compression springs with wire thicknesses in the range of 0.30 to 3.00 mm with abraded ends and in the range of 0.10 to 4.00 mm with unabraded ends. Even extremely strict tolerances regarding length and strength are adhered to in our compression spring production facility. Special-purpose materials that meet specific requirements can also be integrated into production without any problems. Wire materials: All standard spring steel wires in accordance with EN 10270. Non-ferrous wires made of copper, brass and bronze. Special alloys such as: Hasteloy, CuNi44, NbZr1, TaW2. Other materials on request.
Request for a quoteBERGSIEK BEHÄLTERBAU GMBH
Germany
We adapt the products to the requirements of our customers and therefore always find the optimal solution. Optimised for the specified axle load of various base vehicles, our focus is always on the quality of the products, in order to guarantee lasting use of the sweeping containers. We are happy to provide individual and detailed advice in this segment.
Request for a quoteIFA TECHNOLOGY GMBH
Germany
IFA shows you different ways to reduce product rejects: Increase the automation level: If the level of automation gets increased, human errors are reduced, thus avoiding rejects (e.g. digital order processing, automated quality control, immediate error messages by email, SMS, etc.). Analyse production processes: Rethink your production processes in order to increase the product usability (e.g. hardener dosing directly at the consumer). Remove contaminants: Eliminate contamination from the use of the final products.
Request for a quoteINGENERIC GMBH
Germany
INGENERIC SAC The Slow-Axis Collimation optic is a highly efficient means of forming the beam in the slow-axis of diode lasers. It is available either as a monolithic array of cylindrical lenses or as a single lens. All of our optics are produced using high-quality optical glass. The exacting product tolerances guarantee efficient collimation of the light from all emitters and compatibility with laser bars and stacks Product Spectrum In order to offer the best solution for your application INGENERIC provides a broad spectrum of Slow-Axis Collimation optics off the shelf. With respect to length or support structures the lenses can be tailored to your specific needs. Advantages transmission up to 99% minimized dead zones highest level of precision and uniformity customized solutions with small NRE-costs highly economical manufacturing process for large quantities reliable and stable quality
Request for a quoteINGENERIC GMBH
Germany
INGENERIC FAC The most important optical component in the beam shaping systems in high-power diode lasers is the Fast-Axis Collimation optic. The lenses are manufactured from high-quality glass and have an acylindrical surface. Their high numerical aperture permits the entire diode output to be collimated with outstanding beam quality. The high transmission and excellent collimation characteristics guarantee the highest levels of beam shaping efficiency for diode lasers. INGENERIC FAI By means of an FAI lens, the emitter can be directly imaged into a fiber or a target plane. The design of INGENERIC’s FAI lenses is optimized for this specific application and allows an efficient and aberration-free imaging of the emitter Product Spectrum In order to offer the best solution for your application INGENERIC provides a broad spectrum of Fast-Axis Collimation optics from the shelf. Years of development allow us to provide optimized acylindrical lenses for different applications. Based on...
Request for a quoteROCHOLL GMBH
Germany
We love a challenge so we are more than happy to take on special designs. We translate your specifications into top-quality products. In order to meet the most stringent requirements, we rely on our comprehensive machine park and on the production facilities run by highly specialized partner companies. These machines have been designed to manufacture both individual items and batches without any problems. Would you like to have more detailed information on our special designs? Why not contact us directly? We will be happy to assist you. Milling of profiles Special concrete designs Rings for placing Shore test specimens Milling of dumbbell test specimens for tensile tests Multiple test specimens according to DIN 53281ff Stainless steel rings for tests according to EN ISO 10563 Spacers for standard joints according to ISO 11600 Spacers for elongation test according to ISO 11600, made of aluminum or PMMA in various % values Feed mechanisms
Request for a quoteHUGO BECK MASCHINENBAU GMBH & CO. KG
Germany
The intermittent Form Fill and Seal machines flexo 500/700 Push are pusher-machines that wrap difficult products with ease, such as glass bottles in bundles or salt and pepper shakers. They collect and group the products in order to subsequently push them into the film. In order to ensure that no products tilt over, our machines maintain physical contact with the articles to be packaged until they are safely in the bag. The transversal sealing unit is designed as an intermittent version and processes a wide range of films and product dimensions. The packaging style features a bottom overlap.
Request for a quoteVKF RENZEL GMBH
Germany
Especially in the checkout area or at advisory tables, sales staff and customers come into direct contact with each other. The current hygiene regulations require a certain minimum distance to fellow human beings. Our "Quattro" spit shield offers the optimum protection in this situation. As spit or sneeze protection, the stable frame construction is installed in the checkout area or counter area. The large area of 1050 mm width and 850 mm height protects employees and customers. The height of the pass-through is 30 mm. You would like to order this product in a different format? Please ask us for this! For cleaning the material we recommend warm soapy water and a soft microfibre cloth.
Request for a quoteSCHREIBER ESSENZEN GMBH & CO. KG
Germany
Excellent for offices, cars, hotel rooms, toilets, infrared cabins, solariums, sauna rooms. Our Scent gels are made of high quality scented oils. The gels continuously release their fragrance when they come into contact with air, especially with a light air stream, like a retard capsule, and release the fragrance into the environment. Excellent for offices, cars, hotel rooms, toilets, infrared cabins, solariums, sauna rooms. Our Scent gels are made of high quality scented oils. WELLNESS PRODUCTS In order to offer your customers an all-round successful wellness experience, we can develop customised room fragrances and gels.
Request for a quoteOPTIMEL SCHMELZGUSSTECHNIK GMBH
Germany
The CUSTOMline hot melt machine is the top solution for customized casting requirements. It is configured specifically according to customer requirements and can handle complex casting tasks with exceptional precision and efficiency. This machine is ideal for special applications where standard solutions are not sufficient. With the CUSTOMline you get a casting machine that is tailored precisely to the specific needs of your production process in order to achieve optimal results. product [hot melt application systems, hot melt coating machines for paper, hot melt, hot melt adhesives, hot melt packaging, hot melt adhesives, special machines for adhesive processing, hot melts, machines for gluing, machine for gluing, melt casting technology with hot melt, hot melt coating, gluing machines, special machines for casting, sealing, foaming, gluing, special packaging machines]
Request for a quoteCOLOSTRUM BIOTEC GMBH
Germany
Our pharmacy-exclusive brand with functional products for a wide range of applications Colostrum, the valuable ingredient in all LacVital™ products, is nature’s oldest recipe. It is as old as motherhood itself and enriched with an extraordinary concentration of immune factors (antibodies) as well as a unique combination of other important ingredients such as vitamins, minerals, trace elements, amino acids and growth factors. LacVital™ has been producing highly concentrated colostrum pharmacy products for human health since 1997 and is therefore one of the pioneers in the field of modern processing of colostrum products. In order to continually expand our knowledge in the area of (cow) first milk, we have always been in close contact and exchange with research institutions such as the universities of Cologne and London. The product portfolio, which has been carefully developed with our expertise over the past 25 years, is now sold exclusively to pharmacies.
Request for a quoteKELVION HOLDING GMBH
Germany
If a commercial product does not meet the market demands, our Customized Air Cooler product line offers a design-to order process, with your application needs as the starting point. We optimize the total quotation process and tailor our manufacturing to fulfil your requirements. We start with the widest possible product portfolio, offered in our selection software. Our Sales teams can provide non-standard, design-to-order, industrial or OEM solutions. It is a critical feature of our quotation and manufacturing process that we check the design at the earliest opportunity to avoid risk.
Request for a quoteTECHNOTRANS SOLUTIONS GMBH
Germany
Every industrial production requires energy in order to make products. Often, electrical or primary energy is induced as heat, used for operation and must then be dissipated, converted or destroyed. Our gwk process engineers analyse and calculate production processes and the overall thermal periphery with the objective of lowering the necessary energy by means of energy recycling, of reducing the energy requirement at the individual stations, of converting energy or using it several times and dissipating it sensibly. The result is considerable energy saving, which results in cost-cutting and contributes to preserving the environment.
Request for a quoteLEISTRITZ PUMPEN GMBH
Germany
In their smallest versions, screw pumps are used as fuel pumps for vehicles. In close collaboration with our customers in the automotive industry, we develop pumping units through to production readiness in order to bring them to series production with a focus on the highest precision and quality. As a long-term supplier, we thus meet the high quality standards which are required in the automotive industry - even for large quantities. In order to continue being a reliable and innovative partner in this sector in the future, we're not content to just rest on our laurels. That's why we are constantly implementing process optimization (5S, Kaizen).
Request for a quoteTORWEGGE GMBH & CO. KG
Germany
Our solid gravity-driven roller conveyors provide an optimized solution for the internal transportation of your lightweight or heavyweight products. In order to ensure that your conveyed goods flow smoothly and independently all the way from the inlet to the outlet point, the roller conveyor must have the proper declination. This factor must be determined individually according to the type of load carrier and weight of the goods being used for your application. We can also deliver complete solutions that are individually tailored to your requirements; our support already begins during the planning phase for your project. Take advantage of our in-depth experience and benefit from our assessment of your operating conditions and influencing factors (including the suitability of using roller conveyors for your goods) – Leave nothing to chance.
Request for a quoteTORWEGGE GMBH & CO. KG
Germany
Our solid gravity-driven roller conveyors provide an optimized solution for the internal transportation of your lightweight or heavyweight products. In order to ensure that your conveyed goods flow smoothly and independently all the way from the inlet to the outlet point, the roller conveyor must have the proper declination. This factor must be determined individually according to the type of load carrier and weight of the goods being used for your application. We can also deliver complete solutions that are individually tailored to your requirements; our support already begins during the planning phase for your project. Take advantage of our in-depth experience and benefit from our assessment of your operating conditions and influencing factors (including the suitability of using roller conveyors for your goods) – Leave nothing to chance.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
CASTSERVICE GMBH
Germany
Special heat resisting and wear resisting materials are needed in the limestone and cement production. Already since many years we develop and supply high quality casting parts that fulfill these requirements and extend the service time of your production facilities. In order to achieve this, we produce tailored products in close collaboration with our customers that are designed to meet the special demands. We also consult you in questions regarding the choice of the materials and the design. In addition to that, CS-specific-materials and CS-design-developments show our capability.
Request for a quoteCASTSERVICE GMBH
Germany
Special heat resisting and wear resisting materials are needed in the limestone and cement production. Already since many years we develop and supply high quality casting parts that fulfill these requirements and extend the service time of your production facilities. In order to achieve this, we produce tailored products in close collaboration with our customers that are designed to meet the special demands. We also consult you in questions regarding the choice of the materials and the design. In addition to that, CS-specific-materials and CS-design-developments show our capability.
Request for a quoteCASTSERVICE GMBH
Germany
Special heat resisting and wear resisting materials are needed in the limestone and cement production. Already since many years we develop and supply high quality casting parts that fulfill these requirements and extend the service time of your production facilities. In order to achieve this, we produce tailored products in close collaboration with our customers that are designed to meet the special demands. We also consult you in questions regarding the choice of the materials and the design. In addition to that, CS-specific-materials and CS-design-developments show our capability.
Request for a quoteCASTSERVICE GMBH
Germany
Special heat resisting and wear resisting materials are needed in the limestone and cement production. Already since many years we develop and supply high quality casting parts that fulfill these requirements and extend the service time of your production facilities. In order to achieve this, we produce tailored products in close collaboration with our customers that are designed to meet the special demands. We also consult you in questions regarding the choice of the materials and the design. In addition to that, CS-specific-materials and CS-design-developments show our capability.
Request for a quoteCASTSERVICE GMBH
Germany
Special heat resisting and wear resisting materials are needed in the limestone and cement production. Already since many years we develop and supply high quality casting parts that fulfill these requirements and extend the service time of your production facilities. In order to achieve this, we produce tailored products in close collaboration with our customers that are designed to meet the special demands. We also consult you in questions regarding the choice of the materials and the design. In addition to that, CS-specific-materials and CS-design-developments show our capability.
Request for a quoteCASTSERVICE GMBH
Germany
Crushing-wear-parts for hammer-mills, pulverizer mills, jaw crusher and roller crushers Special heat resisting and wear resisting materials are needed in the limestone and cement production. Already since many years we develop and supply high quality casting parts that fulfill these requirements and extend the service time of your production facilities. In order to achieve this, we produce tailored products in close collaboration with our customers that are designed to meet the special demands. We also consult you in questions regarding the choice of the materials and the design. In addition to that, CS-specific-materials and CS-design-developments show our capability.
Request for a quoteCASTSERVICE GMBH
Germany
Special heat resisting and wear resisting materials are needed in the limestone and cement production. Already since many years we develop and supply high quality casting parts that fulfill these requirements and extend the service time of your production facilities. In order to achieve this, we produce tailored products in close collaboration with our customers that are designed to meet the special demands. We also consult you in questions regarding the choice of the materials and the design. In addition to that, CS-specific-materials and CS-design-developments show our capability.
Request for a quoteCASTSERVICE GMBH
Germany
Special heat resisting and wear resisting materials are needed in the limestone and cement production. Already since many years we develop and supply high quality casting parts that fulfill these requirements and extend the service time of your production facilities. In order to achieve this, we produce tailored products in close collaboration with our customers that are designed to meet the special demands. We also consult you in questions regarding the choice of the materials and the design. In addition to that, CS-specific-materials and CS-design-developments show our capability.
Request for a quoteResults for
Production to order - Import exportNumber of results
26 ProductsCountries
Company type
Category