Power supplies - Import export

The power supply units of the PSU67 series are IP67 rated and can be mounted in the field. The devices bypass short power drops of maximally 50 independently. In addition, no-load and short-circuit protection as well as the passive air cooling increase the fail-safety of the devices. The output current is - depending on the type - 2 A, 4 A or 8A. Thanks to their universal AC/DC input, the power supplies can be used worldwide in numerous networks. The high efficiency of up to 90% provides a good energy balance.

The power supply modules of the IM82-24 series feed DC consumers and especially our IM, IMS and IMC interface modules with 24 V. The devices are mounted on DIN rail and meet protection class IP20. The output current is - depending on the type - 2.5 A, 5 A, 10 A or 20 A. Thanks to their universal AC/DC input, the power supplies can be used worldwide in numerous networks. Other features include high efficiency, as well as temperature resistance and dynamic overload capability.

ABB repair, exchange & replacement parts for ABB IRC5 & S4 Pendants Since the start of 2018, we also supply reconditioned repairs as well as exchange and replacement parts for handheld robot control panels from the IRC5, IRC5P, S4, S4+, S4C+, S4P and S4P+ product ranges manufactured by ABB. During the repair process, we ensure that components that are better than the manufacturer's are installed in addition to the manufacturer's original parts. As a preventative measure we also replace any components that are subject to ageing or use related wear. In addition to using components approved by the manufacturer or legislator, we test the reconditioned ABB handheld control panels with original IRB ABB robots under conditions that correspond to the actual working environment. We can therefore also provide an 24 month warranty* on the complete ABB handheld control panel.

ABB repair, exchange & replacement parts for ABB IRC5 & S4 Pendants Since the start of 2018, we also supply reconditioned repairs as well as exchange and replacement parts for handheld robot control panels from the IRC5, IRC5P, S4, S4+, S4C+, S4P and S4P+ product ranges manufactured by ABB. During the repair process, we ensure that components that are better than the manufacturer's are installed in addition to the manufacturer's original parts. As a preventative measure we also replace any components that are subject to ageing or userelated wear. In addition to using components approved by the manufacturer or legislator, we test the reconditioned ABB handheld control panels with original IRB ABB robots under conditions that correspond to the actual working environment. We can therefore also provide an 24month warranty* on the complete ABB handheld control panel.

ABB repair, exchange & replacement parts for ABB IRC5 & S4 Pendants Since the start of 2018, we also supply reconditioned repairs as well as exchange and replacement parts for handheld robot control panels from the IRC5, IRC5P, S4, S4+, S4C+, S4P and S4P+ product ranges manufactured by ABB. During the repair process, we ensure that components that are better than the manufacturer's are installed in addition to the manufacturer's original parts. As a preventative measure we also replace any components that are subject to ageing or userelated wear. In addition to using components approved by the manufacturer or legislator, we test the reconditioned ABB handheld control panels with original IRB ABB robots under conditions that correspond to the actual working environment. We can therefore also provide an 24month warranty* on the complete ABB handheld control panel.

ABB repair, exchange & replacement parts for ABB IRC5 & S4 Pendants Since the start of 2018, we also supply reconditioned repairs as well as exchange and replacement parts for handheld robot control panels from the IRC5, IRC5P, S4, S4+, S4C+, S4P and S4P+ product ranges manufactured by ABB. During the repair process, we ensure that components that are better than the manufacturer's are installed in addition to the manufacturer's original parts. As a preventative measure we also replace any components that are subject to ageing or use related wear. In addition to using components approved by the manufacturer or legislator, we test the reconditioned ABB handheld control panels with original IRB ABB robots under conditions that correspond to the actual working environment. We can therefore also provide an 24 month warranty* on the complete ABB handheld control panel.

KUKA repair, exchange & replacement for pendants, motors and ROBOT We offer general overhaul repairs, as well as exchange and replacement parts for KCP1, KCP2 and KCP4 pendants, motors and other parts manufactured by KUKA. For each repair and every KUKA pendant that is exchanged or purchased as a replacement part from BVS, we not only replace all components that are electronically and mechanically defective as part of the product reconditioning, but also replace all of the parts that are subject to ageing or use related wear. What's more, we only use original components approved by the manufacturer or legislator to repair your KUKA pendants. We are also able to restore the full functionality of the 6D mouse. Thanks to the excellent availability of replacement products in our extensive warehouse comprising over 100,000 assemblies and the option of express repair services, you will receive your KUKA pendant as quickly as possible.

Siemens power supplies The following options are available for power supplies from the SITOP, 6EV and 6EW product ranges manufactured by Siemens Purchase a reconditioned replacement part or new part Replace a reconditioned replacement part or new part Purchase product overhaul repair or cleaning & inspection services We will be happy to supply an on site service incl. support over the phone, upon request. Our extensive replacement parts warehouse with more than 100,000 instantly accessible modules provides our customers with a fast supply of replacement parts ensuring the costs of machine downtimes are kept to a minimum. All of the repaired modules, exchange services and replacement part deliveries of Siemens power supplies from the SITOP, 6EV and 6EW product ranges come with an 24 month warranty.

Siemens power supplies The following options are available for power supplies from the SITOP, 6EV and 6EW product ranges manufactured by Siemens Purchase a reconditioned replacement part or new part Replace a reconditioned replacement part or new part Purchase product overhaul repair or cleaning & inspection services We will be happy to supply an on site service incl. support over the phone, upon request. Our extensive replacement parts warehouse with more than 100,000 instantly accessible modules provides our customers with a fast supply of replacement parts ensuring the costs of machine downtimes are kept to a minimum. All of the repaired modules, exchange services and replacement part deliveries of Siemens power supplies from the SITOP, 6EV and 6EW product ranges come with an 24 month warranty.

The Dragonfly battery is designed to enable measurements in areas where power is not available from the local power grid. •,Capacity of 100Wh (power supply of a typical Dragonfly amplifier for up to 10h runtime) •,One battery module can also power several Dragonfly amplifiers (with correspondingly shortened runtime) •,Several modules can be combined to extend battery life. •,Can be used as a UPS (Uninterruptible Power Supply).

The transducer is suited for the most varied measurement duties on threaded fasteners, to check and adjust assembly tools, like screwdrivers and spanners, and to sense loosening torques, etc. It can also be deployed in blocked mode to test torque wrenches. The device is powered wirelessly and the electrical output is wireless, as well. Hence, there is practically no wear on the device. This sensor is suited for cyclical as well as continuous testing of tools. As the sensor is designed to be torsionally rigid any errors due to it are minimized. No service needed because of contactless data aquisition High interference immunity due to amplified active signal High accuracy due to frequency modulation and strain gage technology Power supply Optional angle detection torque ranges from 1 Nm up to 10.000 Nm torque with square drive with or without angle (w) function Variant bracket for quick assembly

The DN 102 power supply in the KERSTEN neXt® product family is the control station for your discharge system. It supplies and controls up to 5 high voltage generators in the KERSTEN neXt® range and also offers you connection and control of a solenoid valve or AK 1x6 compressor controller. Floating contacts are provided for error and enabling signals. The current operational status of each function is signalled via 9 LEDs in the enclosure lid.

- Operating voltage: 630 V AC/DC- Up to 12 A per pin - Operating current per contact max. 12 A - 4-pole - S-coded - Temperatur (fixed line): -25 bis +80°C - Temperatur (moving line): -20 bis +80°C - Material: PUR - Very compact connection for cables with wires up to 2.5 mm² - Reverse polarity protected, shockproof and vibration-proof - Made of high-quality plastic - Molded wires

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. The ES53 complies with the requirements of the EX approval BAS98ATEX2179X (discharging bar) and PTB00ATEX2071X (blower head). It is characterized by 5 plug-type high voltage outputs, stable 5 kV AC output voltage, small dimensions, easy installation, solid design in protection class IP 54, function and malfunction monitoring of the bars with floating signal contacts (optional).

The high-performance discharge power supply POWER IONIZER impresses with its flexibility. The simple operation, the LED display for visualization of the current values and the integrated function and malfunction monitoring characterize the power supply unit. The POWER IONIZER can be operated with the Eltex AC discharging bars, ion blower nozzles and ion blower pistols. Lowest residual charges can be achieved by different adjustable parameters. Operation is possible as single unit or in a network.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. The ES51 features 5 plug-type high voltage outputs, stable 5 kV AC output voltage, small dimensions, easy installation, solid design with protection class IP 54, function and malfunction monitoring of the bars with floating signal contacts (optional).

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. Small and compact in size, this unit stands out against conventional transformer solutions both in its small dimensions and low weight. Independent from international variations in line voltages, Compact Power ES24 delivers ultimate flexibility in use. This power supply can be used as voltage supply for all Eltex discharge electrodes and blower nozzles in non-hazardous areas.

The sun | power VR M battery is particularly suitable for village power supply, security lighting, UPS systems and home storage. By using HOPPECKE ESS technology, the sun | power VR M battery offers excellent cycle stability and increased service life. Furthermore, the HOPPECKE system connector ensures increased short-circuit safety. Sun | power VR M is maintenance-free regarding water refilling.

The closed lead-acid battery, grid | power V L consists of positive tubular plates and negative grid plates and offers an extremely long cycle life due to its construction. It is one of the longest-lasting lead-acid batteries and is also characterized by its robustness. The grid | power V L are ideally suited for use in areas with high cyclic and capacitive loads, such as power supply systems, telecommunications equipment or long bridging times (between 1 h and > 10 h) for emergency lighting.

The grid | power V H bloc batteries are suitable for both high-current applications and partial-cycle use. They find applications in power plants and energy supply systems, UPS, switchgear and safety lighting systems as well as for starting diesel and emergency generators and in railroad infrastructure applications. For maximum fail-safety, the negative plates are pocketed. The grid | power V H bloc batteries offer a long service life, increased operational reliability and outstanding performance. The product design according to DIN 40738 ensures maximum compatibility when replacing and expanding existing equipment and battery systems.

The grid | power VR and VRX-FT batteries are particularly suitable for use in UPS, telecommunications and power supply systems. This monobloc battery is characterized by its freedom from maintenance in terms of refilling water, its operational reliability, simple assembly and user-friendly installation.

Connects PC and GMH 3xxx device Power supply via PC

The barrel pump driven by rechargeable battery, AccuOne, features a unique new hybrid system with complete flexibility and independence from the electrical network.A powerful light rechargeable battery with the latest next generation lithium-ion technology, without memory effect, with auto-stop function before deep discharge. The new approach to flexibility - One pump with maximum possibilities. Bürkle barrel pumps AccuOne and EnergyOne with the unique hybrid system ensure fast, flexible and convenient filling whenever and wherever you want. The pumps are equipped with two different power supply systems: AccuOne, driven by a high-performance rechargeable battery or EnergyOne, with a power cable for direct connection to the electrical network. The innovative new feature: The power supply units are interchangeable! The rechargeable battery or the power supply unit are fitted with a clip lock and are removable. They can be exchanged quickly and easily. Thus AccuOne can also be...

Our video combi cables consist of several stranded video coaxial cables or a combination of video cables and power supply line. The cables combined with power supply are used when a separate power supply for the camera (control line, lighting etc.) is not possible at the location of use.

Our video combi cables consist of several stranded video coaxial cables or a combination of video cables and power supply line. The cables combined with power supply are used when a separate power supply for the camera (control line, lighting etc.) is not possible at the location of use.

Our video combi cables consist of several stranded video coaxial cables or a combination of video cables and power supply line. The cables combined with power supply are used when a separate power supply for the camera (control line, lighting etc.) is not possible at the location of use.

Our video combi cables consist of several stranded video coaxial cables or a combination of video cables and power supply line. The cables combined with power supply are used when a separate power supply for the camera (control line, lighting etc.) is not possible at the location of use.

Everything about the power supply. Switches, fuses and main power switches for motorsport.

600 1100 mBar 0 1Vdc low cost 10-40 Vdc power supply