Power supplies - Import export

✓ Uninterruptible power supply (DC UPS) with integrated Li-Ion Battery ✓ Intelligent power sharing ✓ Regulated output voltage in backup mode ✓ Minimum load detection ✓ Power fail Timer-Function ✓ Relay dry contact on power fail ✓ USB & RS232 Interface ✓ Plug&Play - recognized as UPS by operating system ✓ Extended functionality by UPScom management software ✓ Shutdown & Reboot Function ✓ Fuel gauge ✓ Approved to IEC/UL/CSA 61010-1 / -2-201 ✓ 3 years warranty The DC UPS UPSI-2406DP1 with included energy storage has been designed for DIN Rail applications. The robust housing protects electronic parts against coarse pollution. The µC-controlled DC-UPS is based on the proven UPSI-technology and features numerous protective and monitoring functions as well as an integrated reboot function, which activates the auto-restart of the computer system, as soon as the input voltage returns during shutdown or later.

✓ Outdoor AC/DC UPS for extreme environments in robust aluminium housing with IP65 protection ✓ Already integrated LiFePO4 energy storage (330 Wh) ✓ Temperature range -20…+50 °C ✓ Intelligent input current regulation ✓ Regulated output voltage in battery mode ✓ Pressure compensation element to prevent condensation inside ✓ Input and output cable firmly installed ✓ IEC/EN 62040-1 certified ✓ Optionally available: mounting sets for masts AC-DC UPS with IP65 protection class for outdoor applications The UPSI-2406IP-38AC is an AC/DC UPS system with numerous digital features and a high performance. The UPSI-2406 is used with an upstream AC/DC converter and combined with an already integrated LiFePO4 energy storage. The primary use of the UPS is in bridging power failures and/or fluctuations. The application to be protected is connected to the output of the UPS. The device has IP65 protection and was specially designed for use under extreme conditions.

✓ Powerful 24 V DC USV (DIN rail version) ✓ Integrated Supercap Pack 13,5kJ ✓ Up to 500 000 cycles ✓ Intelligent input current detection ✓ Regulated output voltage in battery mode ✓ Minimum load detection ✓ Power-fail timer function ✓ Relay dry contact on power fail ✓ Reboot function ✓ Fuel gauge ✓ Shutdown via external signal ✓ Operating temperature range -20°…+70°C ✓ Extended functionality by UPScom management software ✓ 3 years warranty The compact DC UPS modules UPSI-2412DP2 in a robust DIN rail housing are ideally suited for long-term use in control cabinet applications and decentralized solutions for protecting embedded industrial PCs, controls, motor drives, sensors, measurement devices, safety technology and many more. The UPS comes with USB & RS232 interface and provides a capacity of 13.5kJ in up to 500,000 cycles. Extended functionality is available via the UPSGen2 configuration software.

✓ Outdoor DC-UPS for extreme environments ✓ Protection class IP65 / IP67 ✓ Capacity 33Wh ✓ Robust aluminium enclosure ✓ Operating temperature range -20...+50°C ✓ Longlife LiFePO4 Battery ✓ Offers up to 6000 cycles ✓ USB interface ✓ Plug&Play - recognized as UPS by operating system ✓ Extended functionality by UPS.com configuration software ✓ Shock tested to EN 60068-2-27 ✓ Vibration tested to EN 60068-2-6 ✓ Preassembled mounting bracket ✓ Pressure compensation element ✓ Cable set included ✓ 3 years warranty The ruggedized DC UPS series UPSI-IP has been designed for outdoor and industrial use for extreme environments. The robust housing protects electronic parts according to protection classes IP65 and IP67 against jet water and temporary submersion as well as against dust and dirt. The µC-controlled DC-UPS is based on the proven UPSI-technology and features numerous protective and monitoring functions as well as an integrated reboot function.

Precision power supply for lamps up to 100W. Features: PWM power supply for the precision operation of halogen or LED lamps in constant current mode. The 16 bit D/A converter enables very accurate current setup and adjustment. For stress free switch on/off, the operation current is controlled with adjustable ramps.

Calibration standard lamp for spectral irradiance in UV. Features: Deuterium lamp with socket and target. Calibration spectral irradiance from 200 nm to 400 nm. Power supply optional.

Rack mounting power supply, primary switched, remote controllable Input AC 100 - 240 V (wide range), Active-PFC For use in switch cabinets (TS35-rail acc. to EN 60715) Electrical safety / test report: IEC 60950-1, EN 60950-1, UL 60950-1, CSA 22.2 No. 60950-1, UL 508, IEC 62103, EN 50178 etc. EMC: EN 55011 Class B, EN 61000-3-2, EN 61000-6-2, EN 61204-3 No inrush current Floating relay contact Digital-I/O, Analog-IN (0 - 10 V or 4 - 20mA) Interface: RS-232 Very low stand-by-power, high efficiency (smooth behaviour across total input voltage range) Extensive protection for power output: short circuit, no-load, overvoltage, overtemperature

Input AC 100-240V, Active-PFC wide range For use in switch cabinets (TS35-rail acc. to EN60715) Electrical safety / test report: IEC 60950-1, EN 60950-1, UL 60950-1, CSA 22.2 No. 60950-1, UL 508, IEC 62103, EN 50178 etc. EMC: EN 55011 Class B, EN 61000-3-2, EN 61000-6-2, EN 61204-3 No inrush current Floating relay contact, Digital-I/O, Analog-IN (0 - 10 V or 4 - 20 mA) Interface: RS-232 Very low stand-by-power, high efficiency (smooth behaviour across total input voltage range) Extensive protection for power output: short circuit, no-load, overvoltage, overtemperature

Ultra-Low Standby Power High Efficiency up to 85% Smallest design (Ø 53mm) Worldwide applicable, AC/DC wide range input Reduced Inrush current Connect more devices to one automatic circuit breaker Long Hold-Up time EMC acc. to EN61204-3, EN55011 class B, EN61000-6-2 Protection Class 2 (no protective earth) Wide working temperature range (-25°C ... +70°C) Optional, on request: Customized cable length or mains cable Optional, on request: Output power: 20Watts and more Optional, on request: Combined variant with connector and cable Optional, on request: Customized output voltages Optional, on request: Current regulated version for LED application

Ultra-Low Standby Power High Efficiency up to 85% Smallest design (Ø 53mm) Worldwide applicable, AC/DC wide range input Reduced Inrush current Connect more devices to one automatic circuit breaker Long Hold-Up time Safety acc. to EN60950, EN60335 EMC acc. to EN61204-3, EN55011 class B, EN61000-6-2 Protection Class 2 (no protective earth) Wide working temperature range (-25°C ... +70°C) Mounting in flush device box (Ø 60mm, depth 42mm) Optional – on request: Customized cable length or mains cable Optional – on request: Output power: 20Watts and more Optional – on request: Combined variant with connector and cable Optional – on request: Customized output voltages Optional – on request: Current regulated version for LED applications

Rack mounting power supply, primary switched, remote controllable Input AC 100 – 240 V (wide range), Active-PFC For use in switch cabinets (TS35-rail acc. to EN 60715) Electrical safety / test report: IEC 60950-1, EN 60950-1, UL 60950-1, CSA 22.2 No. 60950-1, UL 508, IEC 62103, EN 50178 etc. EMC: EN 55011 Class B, EN 61000-3-2, EN 61000-6-2, EN 61204-3 Very low stand-by-power, high efficiency (smooth behaviour across total input voltage range) No inrush current Floating relay contact, Digital-I/O, Analog-IN (0 - 10 V or 4 - 20 mA) Interface: RS-232 Extensive protection for power output: short circuit, no-load, overvoltage, overtemperature

Rack mounting power supply, primary switched, remote controllable Input 380 - 500 V; 3 AC (wide range), Active-PFC For use in switch cabinets (TS35-rail acc. to EN 60715) Electrical safety / test report: IEC 60950-1, EN 60950-1, UL 60950-1, CSA 22.2 No. 60950-1, UL 508, IEC 62103, EN 50178 etc. EMC: EN 55011 Class B, EN 61000-3-2, EN 61000-6-2, EN 61204-3 No inrush current Floating relay contact, Digital-I/O, Analog-IN (0 - 10 V or 4 - 20 mA) Interface: RS-232 Very low stand-by-power, high efficiency (smooth behaviour across total input voltage range) Extensive protection for power output: short circuit, no-load, overvoltage, overtemperature

Ultra-Low Standby Power 60mW High Efficiency Worldwide applicable, AC/DC wide range input 100–240V Reduced Inrush current Safety acc. to EN61558-2-16, EN60335; EN60950 EMC acc. to EN61204-3, EN55011 class B, EN61000-6-2 Protection Class 2 (no protective earth) Wide working temperature range (-25…+85°C) Mounting in flush device box Ø 60 mm, depth 45 mm

Input 380–500V 3AC (wide range), Active-PFC Electrical safety: EN60950, EN50178, UL508 EMC: EN 55011 Class B, 
EN 61000-6-2 Extensive protection for power output: short circuit, no-load, overvoltage, overtemperature Very low stand-by-power, high efficiency No inrush current

Input 100–240VAC (wide range), Active-PFC Electrical safety: EN60950, EN50178 EMC: EN 55011 Class B, EN 61000-6-2 Extensive protection for power output: short circuit, no-load, overvoltage, high temperature Very low stand-by-power, high efficiency No inrush current Very high transient robustness High-precision output voltage