Pipe production - Import export

The »speedfit« and »sharkbite« line systems are ideally suited to transporting compressed air. Both can be installed quickly and easily by you and offer, compared to conventional methods, significant labour and energy savings. Convert your compressed air piping systems with minimal production downtime and cost. Plastic pipes, aluminium pipes, air distribution socket, pipe clamps, water separators, loosening assists, brass connectors, POM/PP connectors, protective caps and retaining rings comprise this range. Both are durable and corrosion-resistant, and no additional sealing material is required for their installation. You get optimum flow rate and the utmost air quality. You also extend the lifespan of your systems and installations.

The »speedfit« and »sharkbite« line systems are ideally suited to transporting compressed air. Both can be installed quickly and easily by you and offer, compared to conventional methods, significant labour and energy savings. Convert your compressed air piping systems with minimal production downtime and cost. Plastic pipes, aluminium pipes, air distribution socket, pipe clamps, water separators, loosening assists, brass connectors, POM/PP connectors, protective caps and retaining rings comprise this range. Both are durable and corrosion-resistant, and no additional sealing material is required for their installation. You get optimum flow rate and the utmost air quality. You also extend the lifespan of your systems and installations.

Also DVK-HD® pipe couplings with traction relief are ideal for a quick and safe use for pressure conveying. Their characteristics are equal to DVK-HD® pipe couplings: double secured massive aluminium clamps screws M12 with massive threaded bars very easy to mount due to circular version, nitrile gasket is temperature-resistant from -20°C to +80°C and safe for use with food optionally available with silicone gasket (-60°C up to +200°C) Additionally pipe couplings of type DVK-HD® with traction relief have the following product specifications: monobloc pipe coupling with traction relief with bridge part to safeguard against axial forces material: couplings in aluminium, clamps in galvanized steel pipe clamps and traction bars traction-resistant

Stainless steel pipe couplings have the following product characteristics: food safe, UV-resistant temperature-resistant up to +80°C with grounding strip

Category Diesel technology / Service parts for injection pipes / Union nuts for injection pipes Product number supplier 244004

Category Diesel technology / Service parts for injection pipes / Union nuts for injection pipes Product number supplier 244002

Our sight glasses for conveyor pipes have the following product specifications: Real glass pipe (borosilicate glass 3.3) Fire-polished pipe end Two aluminium pipe couplings Continuous stepped ring gasket Natural black rubber

Purging the pipe Product features Preferred use in systems which allow the economic emptying or partial emptying of the pressure pipe or in systems into which sewage is not discharged all year round, making emptying of the pressure pipe sensible e.g. on campsites (high/low season) For systems where high and low points are not very pronounced Can be used when small air pockets can be present in the pressure pipe without affecting the pumping capacity or the pressure pipe itself An accompanying pipe is not required

Category Compressed-air technology / Compressed-air hoses / PA, PU, PE Pipes / Polyamide pipe / PA 12, black Product number supplier 67209101

Wipers for steel bars In the production of pipes and steel bars, socalled wipers are used for leaning. The wipers have a round or rectangular outer profile and an inner profile that matches the shape of the object to be cleaned. Normally, several wipers are mounted in series, whereby the passthrough openings are smaller than the profile. The bar is pushed through the elastomer plates at high velocity, and the rubbery material strips the surface free from grease and cleaning fluid residues. It is the edge that counts! Just a like a car window wiper, it is the edge that counts. Normally, the wipers are stamped from sheet goods. During stamping, the elastomer becomes distorted; the inner edge is therefore not dimensionally stable and is at an angle. Only part of the edge wipes emulsions from the surfaces depends on the profiles. This edge is rapidly worn down; the cleaning action is then unsatisfactory. Streakfree cleaning

CSN® explosionproof flow heaters are used for heating up flowing gases and liquids in hazardous areas. The devices consist of explosionproof flanged immersion heaters, which are installed in corresponding pipe or pressure vessel. Our products realize individual solutions for complicated technical process. Different heating systems for heating up liquids, nitrogen or other gases activate exact determinded processes in chemical factories. In close discussion with our customers problems will be defined and changed in technical optimale solutions. Our QualityManagementSystem ensures the high quality level of our customers. Further information about our CSN® Exflow heater

BORSIG offers comprehensive services for the power engineering, chemical and petrochemical industries as well as oil, gas and water supply. From our facilities Berlin, Gladbeck and Hamburg our exellently networked global team of engineers and technicians provide you with competent, fast and reliable support. We have decades of experience in planning, performing and implementing all kinds of assembly, manufacturing and service tasks. We rectify malfunctions and procure any required spare parts. We support you in the planning, delivery and installation of new components in your systems, modification, inspection and maintenance of existing components provided by us or third parties, and we also offer troubleshooting within the framework of a 24-hour standby service. Our services comprise: - Pressure vessels: Field service and repairs - Engineering - Boiler service - Piping - Workshop facilities for new production and overhaul of vessels

We are your reliable partner for the procurement and processing of technical ceramics, e.g. Oxide ceramics (alumina, magnesia, zirconium oxide) and non-oxide ceramics (with carbide or nitride). Technical ceramics - also called industrial ceramics or industrial ceramics - have unique material properties and are therefore one of the most powerful materials available. We offer the following ceramic materials and parts: Semi-finished products: Rods, pipes, flat material, etc. Laboratory parts: bowls, crucibles, etc. Finished parts: Drawing parts of all kinds according to customer requirements

Suitable for: Steel pipes Steel waste water pipes Cast iron pipes HDPE waste eater pipes PVC, PE and PP waste water pipes Traditional product for many applications in plumbing Zinc plated version Easy installation through wide opening Forged steel nail We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Funnels for pipes and bright steel In the production of pipes and bright steel socalled funnels are used for threading in the production plants. In most cases funnels made of polyamide are used, but due to the material hardness and the sharpedged pipe ends wear out very quickly. It depends on the material sphere As an alternative, secutex offers polyurethane funnels for this purpose. In contrast to polyamide, these are softer from the material and therefore also more wearresistant than sharpedged pipe ends. This means longer service life for the customer as well as better surface protection for very sensitive materials. For every size secutex funnels can be produced in the required dimensions according to customer drawings.

Wipers for steel bars In the production of pipes and steel bars, socalled wipers are used for cleaning. The wipers have a round or rectangular outer profile and an inner profile that matches the shape of the object to be cleaned. Normally, several wipers are mounted in series, whereby the passthrough openings are smaller than the profile. The bar is pushed through the elastomer plates at high velocity, and the rubbery material strips the surface free from grease and cleaning fluid residues. It is the edge that counts! Just a like a car window wiper, it is the edge that counts. Normally, the wipers are stamped from sheet goods. During stamping, the elastomer becomes distorted; the inner edge is therefore not dimensionally stable and is at an angle. Only part of the edge wipes emulsions from the surfaces depends on the profiles. This edge is rapidly worn down; the cleaning action is then unsatisfactory. Streakfree cleaning

The REA JET One Dot Systems (EDS) are particularly well suited to very fine dot and line markings. The dot size is configured by selecting the nozzle size and by varying the material pressure, and the stepless setting on the controller. Applications — for quality assurance you can mark products with a dot to be recognized as either good or bad (use automatic camera recognition) — colored line marking for pipes, profiles and endlessly manufactured products (e.g. extruded goods) — applying oils, separating agents, soaps or process water — welded seam marking in the manufacturing of metal profiles — applying fragrances to cosmetic samples

The flexibly combinable dosing station allows the exact blending of up to seven material components. Two configuration levels are available the DOS 2 (one main and one side component) and the DOS 7 (one main and up to six side components). Dosing is carried out according to customer-specific requirements. The processing of granules and powder is also possible. The dosing station can be flexibly equipped with different funnel weighers and thus fulfills the most demanding processes of gravimetric weighing. Common applications include film extrusion or PVC pipe production with complex formulations. Other advantages/features: — Suitable for complex recipes and special applications — Individually and flexibly configurable (DOS 7 also as 6-component dosing without main component available) — Hopper scale sizes of main and side components freely selectable — Variants for granules and powder

DESCRIPTION High stability on high capacity. Can handle multiple ointment viscosity and types Type of metal used S.S 316 / 304 Certifications ISO 90012015, OHSAS 180012007, ISO 500012011, ISO 450012018 SPECIFICATION Preparation unit tanks for first and second phase Storage tank equipped with flowmeter system Homogenizer Sanitary centrifugal pump Mechanical filter Filter platform collector Pipes and fittings All joints are tic and orbital welded, polished and treated Stainless steel Teflon check valves, Pipe tri clamp joints. The production capacity varies depending on the type of products Gear pump cycle of the feeding device can speed up product forming and rapid discharge Semiautomatic weigh filling machine for gallons. Monoblock filling and capping machines feeding and collecting tables HMI and SCADA with touch screen system. Available certification up on your request UL, CE, GMP, FDA, ASME.

SAVEOMAT COEX is a special application option for coextruded products. As precise feeding and exact mixing of the various material components is crucial in the production of pipes and fittings using the coextrusion process. Whether in the production of conventional PE-multi-layer pipes for reliable gas and water supply and wastewater disposal or in the marking of the pipes by coloured longitudinal stripes or colouring of the outer layer. Even when several extruders are used, the SAVEOMAT COEX application ensures a stable production process and a constant flow of material. The production of complex recipes enables a wide range of applications. Other advantages/features: — Special application for coextruded products — Suitable for complex formulations and special applications (e.g. colored longitudinal stripes) — Hopper scale sizes freely selectable

The AUREX XXL is the solution for large pipes with a diameter of up to 3000 mm. The system works with 8 water-coupled ultrasonic sensors that can be pneumatically adjusted. This is possible without conversion in case of a change of dimensions. Minimum wall thickness tolerances are obtained via the downstream control loops of the weight per meter and thin point control and production is perfected. The better centering enables considerable material savings, especially for large pipes. Further advantages/features: — Production quality assurance by measuring and controlling wall thicknesses and diameter — Documentation of production — Material savings of up to 5% — Large measuring range — Proven measuring and control principles

SAVEOMAT Liquid is the multi-component dosing station for the recipe-precise dosing of solid and liquid components. The use of silane and peroxide is especially applied in PEXa and PEXb pipe extrusion and cable production. Precise mixing of the raw material is achieved by combining a static and a dynamic mixer. An injection tube is integrated in the dynamic mixer, whereby the peroxide or silane is introduced and ensures uniform wetting. Thanks to its safety features, SAVEOMAT Liquid meets the highest safety requirements while allowing a wide range of recipes. Other advantages/features: — Recipe-accurate dosing and conveying —Constant wetting of the raw material — Meets the highest safety standards — Dosing and mixing of materials under inert gas atmosphere — Reduction of the peroxide percentage by approx. 10 % through uniform and continuous metering

COMBER Pressofiltro® Series PF 50 - PF 6000 Steam Sterilizable Design COMBER Pressofiltro steam sterilizable agitated Nutsche filter dryers are designed to maintain full sterility during the entire process, from inerting through slurry feeding and filtration, washing and drying to discharge of the dry product. CIP and SIP provide a very effective, safe and convenient form of sterilization, easy to automate and validate. Special properties for the customer’s benefit: With Cleaning-In-Place (CIP) and Sterilization-In-Place (SIP) systems designed for the automatic cleaning and disinfecting of the equipment Steam sterilizable filter dryer design assures steam reaches all parts of the filter dryer in contact with the product and air is not trapped in the unit during sterilization In compliance with cGMP and FDA guidelines, with vessel interior and all associated piping designed to prevent product adherence and to facilitate cleanability, fully drainable for clearance of condensate...

Cable protection tubes for industry with different properties: With our corrugated tubes, threaded tubes, protective hoses and connection fittings, you are well equipped for all eventualities. They easily withstand both low and high temperatures and also have excellent fire protection and flame properties. Many of our products for industrial cable protection systems are also distinguished by the following features: self-extinguishing halogen-free cadmium-free low flue gas emission weatherproof chemical permanence antistatic Accessories for your industrial cable protection: Of course FRÄNKISCHE Rohrwerke also supplies the appropriate accessories for your industrial cable protection. Mounting clips (with and without base) Mounting rails System holder (Corrugated) pipe clamps PETP - pipe edge protection v.m. Our products for industrial cable protection systems are suitable for all industrial pipe systems from our range.

motan’s material selection stations assure that every desired connection of a material to a processing machine in your production process can be made quickly and reliably without contamination. Fixed pipe connections throughout the whole production process until the next material change ensures maximum security. METROLINK: the most advanced fully automatic material selection and distribution system.

Step 1: Filling Insert plunger Fill product into drum Step 2: Storage Storage Transportation to filling line Step 3: Preperation Special emptying lid placed over drum Step 4: Emptying Drum emptying through the product piping to the filling line Step 5: Ready for a new load The drum is clean The drum can be filled again

Step 1: Filling Insert plunger Fill product into drum Step 2: Storage Storage Transportation to filling line Step 3: Preperation Use pallet truck to move drum into drum-emptying stand Lower the cover with the handwheel Step 4: Emptying Drum emptying through the product piping to the filling line Step 5: Ready for a new load The drum is 100 % empty It is easy to clean The drum can then be filled again