Nitrogen - Import export

The SmartMeth™ control system is a fully automated nitrogen methanol mixing system for heat treating furnace atmosphere production. The SmartMeth™ utilizes the latest in precision differential pressure flow measurement and touch screen controller design. This first of its kind system with built-in flow rate calculation automatically sets the nitrogen and methanol flow rates based on a desired %CO furnace concentration. FEATURES & BENEFITS • Automatic flow set point calculation - calculates the required nitrogen and methanol flow rates to maintain a desired %CO at the required volume • Customizable recipe software • Optional integrated carbon and temperature control • Automatic atmosphere recovery provides additional synthetic gas flow on demand, when introducing a new load into the furnace • Integrated paperless chart recorder stores furnace temperature, %carbon, and synthetic gas flow furnace details • Completely assembled and tested to NFPA 86 safety guidelines

for more Information pleasee see our web page https://www.sygastec-gmbh.com/cms.html

Nitrogen N2

Nitrogen N2

Nitrogen N2

Nitrogen N2

Nitrogen Monoxide NO

Nitrogen Monoxide NO

Nitrogen Monoxide NO

Nitrogen Dioxide NO2

Nitrogen Dioxide NO2

Nitrogen Dioxide NO2

Nitrogen N2

Nitrogen Monoxide NO

Nitrogen Dioxide NO2

Suspension strut (gas hydraulic shock absorber) by LEBENDahmenstechnik GmbH Advantage Use in pulling and pushing direction Small design Variable preload force of the damper Used as a buffer in Amphibious vehicle Underground shuttle … Illustrated suspension strut Damping of the independent suspension of an amphibious vehicle Special feature Nitrogen gas spring as triple membrane accumulator Regulation of the spring stiffness while driving

AdBlue® – the effective fuel for modern diesel engines with SCR catalytic converters. This innovative solution actively reduces emissions and nitrogen oxides (NOx) in diesel exhaust gases and enables compliance with the strict Euro 5 and Euro 6 standards for trucks, cars and commercial vehicles. AdBlue® has been specially developed for vehicles with SCR catalytic converters (Selective Catalytic Reaction) to significantly reduce their exhaust emissions. As a clear, aqueous solution, it consists of 32.5% high-purity urea. By using AdBlue®, you can contribute to active environmental protection with your vehicle fleet and meet the required exhaust emission standards. Our advisory team is available to answer any questions you may have.

Pressure of the nitrogen surface 50-200 bar - pressure output 200 bar - Hydraulic connection to our UNI Future 2050 pressure at 850 bar infinitely adjustable The charging time of a 18 liter pressure reservoir with 200 bar operation pressure is about 1,5 minutes if the pressure loss in the storage is 20 bar (180 bar) and output pressure of the nitrogen bottle is up to 200 bar. At a output pressure of 50 bar the charging time is about 4,5 minutes. !!!TARGET PRICE!!!

F30A - the most reliable LC-MS Nitrogen Generator nitrogen purity: up to 99 Nominal power: 1,7 kW Efficient and innovative - designed for your laboratory Ideal for use in laboratories where a dependable and affordable source of nitrogen is essential and is suitable all laboratories Premium compressor with state-of-the-art control Unique nitrogen generation solution for your laboratory including advice, customization and a full installation and support service. With the HF30A, Dürr Technik expands its range of nitrogen generators for your analytical applications. Our HF30A nitrogen generator is ideal for use in laboratories where a dependable and affordable source of nitrogen is essential and is suitable all laboratories, especially where a high pressure clean air source is not available at the point of use.

Compact nitrogen gas generator HF30N Integrated nitrogen storage within the unit With the new nitrogen generators HF30N and HF60N Dürr Technik is expanding its portfolio in the field of analytical applications. The HF30N and HF60N nitrogen generators are ideal for use in laboratories that already have a central compressed air supply or where a source of clean compressed air is available at the place of use. HF30N and HF60N are optimised for the current LC-MS systems (liquid chromatography/mass spectrometry), which are increasingly used in laboratories for analysis. Thanks to their compact design and low weight, the nitrogen generator can be mounted on the workbench or underneath. Efficient nitrogen separation ensures a reduced total air requirement and at the same time ensures the production of high purity nitrogen. This results in lower real operating costs and a reduced carbon footprint.

The 2 channel premium pyrodetector is specially designed for the analysis of nitric oxide (NO). The optical filter with a CWL of 5300 ± 30 nm and a HBW of ± 20 nm as well as an additional reference channel (CWL: 3910 ± 28, HBW: 70 ± 10 nm) optimize the measurement results of the dual IR detector. Its main application lies in the measurement of process gases or exhaust gases in industrial production and process engineering. Storage and operation can take place between -20 and 85 °C. The particularly high detectivity of up to 4.0*10^8 cm√Hz/W as well as the very high sensitivity up to 200000 V/W provide an extraordinary signal quality in the sector of pyroelectric detectors. Two sensor chips with a thin film CPM membrane form the core of the dual detector MPS2SENS nitrogen monoxide. Thanks to the Ceramic Pyroelectrical Material (CPM) and the unique product design the detector features a high read-out rate up to 100 Hz as well as a short response time.

This premium pyroelectric quad detector is tailored for measurement applications for the analysis of nitrogen oxides (NOX) in environments from -20 to 85 °C. The filters determine the infrared detection of the following gases: water vapor (H2O) (CWL: 6580 ± 40, HBW: ± 35 nm), nitric oxide (NO) (CWL: 5300 ± 30, HBW: ± 20 nm), sulfur dioxide (SO2) (CWL: 7300 ± 50, HBW: 180 ± 20 nm) and an embedded reference channel (CWL: 5060 ± 25, HBW: 100 ± 15 nm). The four-channel IR pyrodetector achieves a high detectivity of up to 4.0*10^8 cm√Hz/W and sensitivity of up to 200000 V/W. The MPS4SENS NOX provides reliable measurement values in ambient temperatures between -20 and 85 °C, e.g. for industrial gas measurement or process analysis in various industry and manufacturing areas, such as chemical, textile, environmental technology, recycling or exhaust gas technology. Micro-Hybrid is the only manufacturer of pyroelectric 4-channel detectors with a high performance membrane in a TO39 package.

2 channel premium thermopile detector for IR gas analysis of nitric oxide (NO) with a CWL of 5300 ± 30 nm and a HBW of 200 ± 20 nm. Application areas of such measurement applications are mainly in the industrial gas measurement of process gases or exhaust gases. The particularly high detectivity of up to 6.27*10^8 cmHz^1/2/W, as well as the very high sensitivity of up to 171 V/W, provide a signal quality comparable to pyroelectric detectors. The integrated thermistor for reference temperature determination, an interference absorber and an additional reference channel (CWL: 3910 ± 28, HBW: 70 ± 10 nm) optimize the measurement results of the dual IR detector. Storage and operation can be performed between -20 and 85 °C. Two sensor chips with 200 bismuth antimony/antimony thermopiles each form the core for the 2 channel thermopile MTS2SENS200 nitrogen monoxide. Due to its high-end materials, the thermopile is particularly durable and delivers precise measurement results.

The NDIR bundle NO combines perfectly matched thin-film IR emitters of the JSIR 350 series and thermoelectric IR detectors of the MTS 200 series for the detection of nitric oxide (CWL: 5300 ± 30 nm / HBW: 200 ± 20 nm). It is available at short notice and provides users with measurement results for their project in a very fast way. Micro-Hybrid is the only supplier worldwide who offers all components for the analysis of infrared active gases in form of IR-emitters and IR-detectors. Industries such as automotive, railway and shipping rely on NDIR exhaust gas analysis data. This technology is also used for monitoring industrial exhaust gases, production processes and environmental conditions.

RAFI Eltec is a technical services provider that develops and produces electronic assemblies and systems according to customer-specific requirements – from the idea to the finished product. RAFI Eltec operates 5 fully automatic SMD high-speed, precision assembly lines with nitrogen reflow soldering technology. Our focus: - BGA, µBGA, CSP - QFN, Finepitch - 0201 - Novel components - Package-on-package - Automatic optical inspection Providing maximum quality for your ideas and products is what motivates us. To achieve this, we introduce our high quality standards to projects even before manufacturing begins. As a result of our expert analysis of customer data, potential pitfalls are eliminated in advance. We document sample productions in detailed test reports and discuss them with you. Due to our state-of-the-art testing technology and our in-house test equipment construction, we increase the quality of your production while simultaneously reducing logistics costs.