New laser - Import export

The new QuellTech Q5 Laser Scanner Series combines the advantages of small form factors with both high resolution and scan rate. The sensor disposes of different set-up possibilities with respect to the analysis algorithm. Measurement results are delivered via Ethernet, calibrated in the X / Z plane. Special adjustable algorithms can be selected, extremely useful particularly also for optically most demanding surfaces. Time-consuming calibration tasks for the user are no more required, as the calibration routine runs on board. High Scan Rate with up to 14,000 Profiles per Second Due to an appropriate limitation of the image range (AOI) in X and Z direction, the scan rate could considerably be increased. High resolution and detection frequency with up to 14.000 profiles and 28 Mio. points per second •X measuring range from 10 to 1022 mm •Z measuring range (height) from 5 to 878 mm •Laser wave length blue 405/450nm, red 650nm

The optoNCDT 1320 is a new laser triangulation sensor with compact size for displacement, distance and position measurements. Due to its extremely compact size including integrated controller, the sensor can also be integrated into restricted installation space. Its low weight make the optoNCDT 1320 ideally suitable for applications where high accelerations occur, e.g., on the robot arm or in pick-and-place machines. The optoNCDT 1320 offers high accuracy and adjustable measuring rates up to 4kHz. The Active Surface Compensation (ASC) provides stable distance signal control regardless of target color or brightness. Very small objects can be detected reliably due to the small measurement spot size.

The new optoNCDT ILR1171-125 laser distance sensor is used for distance measurements up to 270 m and particularly impresses in outdoor measurements. Due to the laser time-of-flight principle with infrared light and a measuring rate of up to 40 kHz, high energy pulses are achieved, allowing stable measurements with very good signal quality. In addition, this better compensates for interfering influences such as fog or rain. The high temperature stability allows applications at temperatures from -40 °C to +60 °C. Thanks to its compact dimensions, the sensor can also be integrated into the smallest installation spaces.

Portable high resolution CR scanner for all NDT radiography applications - weld inspection, profile images and aerospace Unique 30 μm basic spatial resolution – BAM-certified Scans flexible imaging plates up to 35 cm in width Widest range of applications thanks to TreFoc Technology Intuitive handling & easy transition from film Portable and compact (17.5 kg) What does TreFoc Technology mean and how does it work? TreFoc Technology is the name for the our new laser focussing technology, uniquely in systems from DÜRR NDT. With TreFoc the laser beam is adjusted perfectly to give optimal image results and the highest signal-to-noise ratio in any application. Inside the laser tube, an iris diaphragm adjusts the laser beam diameter. Since the perfect laser beam diameter can be selected for each object and image type, optimum results for any particular application can be easily achieved. Regardless of the application – high-resolution image or low-exposure c

The Z+F PROFILER® 9020 and 9020-2 is a highly efficient 2D laser scanner for mobile mapping applications. The rotation speed of the Z+F PROFILER® 9020 is 267 Hz or 16,020 rpm max.. It measures up to 182 m and has a very high data quality. For data capturing in close range, it is equipped with special optics. Compared to previous models, it has an internal reference plate, a very low power consumption, very fast startup time and over 50% reduced weight and size. A new, very powerful laser technology and further developed algorithms ensures highly accurate measurement results on rails, roads, street signs and other traffic control systems such as traffic lights. Technical highlights: 267 profiles/sec. P9020: 1.094 million points/sec. P9020-2: 2.188 million points/sec. 0.2 mm accuracy 182 m range 360° field of view The Z+F PROFILER® 9020 and 9020-2 can be flexibly integrated into different MMS

The FemtoFiber smart family is TOPTICA’s new series of ultrafast fiber lasers available as picosecond or femtosecond versions, based either on Ytterbium-doped or Erbium-doped fiber laser architecture. These systems are dedicated to applications ranging from seed laser purposes, biophotonics to terahertz generation and two-photon polymerization. Optimized for a compact footprint uniting optics and electronics in one box, these robust all-fiber lasers are the perfect choice for flexible OEM integration.

STATE-OF-THE-ART LASER TECHNOLOGY FOR MAXIMUM PRODUCTIVITY AND QUALITY Leap in performance in laser technology! Whether it is rapidly increasing laser powers, different fiber types or even new cutting gases: Today's laser machines must be able to follow current trends. Innovation is needed as applications must become more effective and transparent. In addition, the increasing shortage of skilled workers is pushing for plants to become more self-sufficient. One machine operator alone has to be able to supervise several machines. Automation of nozzle change material supply and removal and continuous data exchange or reconciliation across the entire production flow are the prerequisites that were at the forefront of the ELEMENT L's development.

A new standard for affordable laser alignment The new ShaftAlign Touch is a rugged laser alignment system that provides digital, cloud, and other advancements over the decadesold but still widely used dial indicator and feeler gauge. ShaftAlign Touch is a combination of software and hardware innovations enabling maintenance teams to address a wide variety of alignment challenges that basic laser alignment systems cannot handle. It also delivers premium Adaptive Alignment capabilities that, until now, were not available in an entrylevel system. Two innovations – singlelaser technology and Active Situational Intelligence – differentiate ShaftAlign Touch from the competition. Together, they deliver the “magic” that enables Prüftechnik alignment products to automatically adapt – in real time, as alignment jobs are finished – to the asset, the situation, and the user's experience level.

The new standard for precision and speed With the new VTLG Series laser systems, Vollmer is giving strip thickness measurement new impetus: They combine the highest precision with rolling mill-oriented design. Thanks to their unique measuring method, they are suitable for use in cold rolling mills. With a measuring precision of ± 1 µm and scanning rate of up to 80 kHz, they offer the precision and speed necessary for the control of the strip thickness. VTLG systems are the only laser gauges to measure the strip thickness during rolling in the mill, thus opening up completely new possibilities in production and quality assurance for our customers. As with our contact gauges, they measure the thickness irrespective of the alloy – ideal preconditions for use in the rolling mill, but also on the annealing line, in the finishing section, on the strip edge miller or in the steel service centre.

Our individually programmable cutting devices revolutionize the machining of aluminum and stainless steel as well as a wide variety of types of structural steel. Clean and burr-free cross-sectional images of hard as well as soft materials meet your high requirements. LVD Laser Electra FL 3005: Incredibly fast and flexible, the Electra fiber laser cutting system is ideal for ultra-high-speed cutting of thin sheet metal materials. The Electra can cut a wide range of ferrous and non-ferrous metals. • Ergonomic, modern design • Optimized machine design for maximum dynamics • Ultra-high-speed cutting • Processing speed up to three times faster than with CO² • Intuitive LVD Touch-L touch screen control • Highly efficient fiber laser source • Automatic shuttle table system Trumpf Laser: The new generation of the proven laser machine TruLaser 3040 combines innovative technologies and high laser power with a new design concept and optimized operation.