Special dimensions - Import export

Hand-, Head- and Manhole Gasket the Safety Gasket for Steam Boilers and Vessels Characteristics The new gasket quality novaSEAL HP is made out of a high performance, temperature, corrosion and chemical resistant woven fabric. Technical parameters Temperature: t = +250 °C Pressure: p = 40 bar Main application Steam Boilers Container in round and oval shapes Gasket Characteristics Surface pressure: min. 5 N/mm 2, max. 35 N/mm 2 Recommended boiler heating gradient: max. 2 °C /min Pay attention to assembly instruction (added to each single gasket)! Suitable for Safety Gasket for Steam Boilers and Vessels Approvals Boiler water/Media resistance: TRD 611 Component designation: TÜV.D.99-001.C Form of delivery Special dimensions in cross section 15 x 8 mm or 25 x 10 mm are available on request. Standard dimensions (mm) 80x110x15x8 100x150x15x8 115x165x15x8 80x120x15x8 120x150x15x8 120x160x15x8 90x120x15x8 110x150x15x8 200x300x25x10 150x200x15x8 280x380x25x10...

High temperatur sheet gasket from expanded graphite with stainless steel foil reinforcement Characteristics One layer of 0.05 mm stainless steel carrier (3 mm thickness 2 layers) with graphite on both sides fixed by a special only 10 µm thick adhesive coating. Purity 98 % Practically no cold flow or creep under temperature Excellent in use at cycling temperatures Very good sealability even at low gasket stress. Technical parameters pH 0 - 14 Temperature: t = -250 … +550 °C, in oxidizing atmosphere 450 °C Pressure: p = 40 bar Main application Suitable for sensitive flange connections Housings of pumps and fittings Suitable for In all industries Approvals BAM DVGW Variant Economic grade alternative D 5.2 with 0.05 mm stainless steel foil reinforcement Form of delivery Gasket sheet size of 1,000 x 1,000 mm in der Dicke 0.55 / 0.75 / 1.0 / 1.5 / 2.0 / 3.0 mm or cut gaskets according to drawing, or EN and international Standards. Special dimensions on request.

Sheet gasket from expanded graphite with tanged stainless steel foil reinforcement Characteristics Graphite gasket reinforced with a 0.1 mm tanged stainless steel insert and a purity of 98 %. Practically no cold flow or creep under temperature Excellent in use at cycling temperatures High blow out safety Built in safety against assembly and operational problems. Technical parameters pH 0 - 14 Temperature: t = -250 … +550 °C, in oxidizing atmosphere 450 °C Pressure: p = 100 bar Main application Robust graphite gasket applicable in all industries and as well approved to seal older equipment. Suitable for In all industries Approvals BAM DVGW FIRESAFE Variant Economic grade alternative D 5.1 in 0.1 mm 316 tanged stainless steel sheet reinforcement Form of delivery Gasket sheet size of 1,000 x 1,000 mm in thickness of 1.5 / 2.0 /3.0 mm or cut gaskets according to drawing, or EN and international Standards. Special dimensions on request.

Gasket Sheet of Expanded Graphite, both sides with impregnation Characteristics Soft and extremely adaptable non reinforced graphite sheet with a purity of 99.85 %. Special coating on both sides raises sealabilty. Practically no cold flow or creep under temperature. Non hardening Excellent in use at cycling temperatures Excellent sealability even at low gasket stress. Technical parameters pH 0 - 14 Temperature: t = -200 … +550 °C, in oxidizing atmosphere 450 °C Pressure: p = 40 bar Main application Sensitive Flange connections like sight glasses, glass- or glass lined flanges in all industries. Suitable for In all industries Approvals BAM DVGW KTW Variant Economic grade alternative D 5.0 on request. Form of delivery Gasket sheet size of 1,000 x 1,000 mm in thickness of 1.0 / 1.5 / 2.0 mm or cut gaskets according to drawing, or EN and international Standards Special dimensions on request.

100 % virgin PTFE, modified and filled with Barium sulfate Characteristics Protected against cold flow Excellent recovery Excellent chemical resistance in caustic applications Reduced leakage rates compared to other filled PTFE gaskets under the same gasket stress. Technical parameters pH 0 - 14 Temperature: t = -180 … +230 °C, short term up to 260 °C Pressure: p = 55 bar Article code / Thickness WHITE 08 / 0.8 mm WHITE 10 / 1.0 mm WHITE 15 / 1.5 mm WHITE 20 / 2.0 mm WHITE 30 / 3.0 mm Main application Steel-, Glass-, Ceramic-, glass lined or plastic flanges on pipework Vessel Container Reactors Suitable for Chemical and Petrochemical industry Approvals TA-Luft Form of delivery Gasket sheet size of 1,500 x 1,500 mm in thickness of 0.8/1.0/1.5/2.0/3.0 mm or cut gaskets according to drawing or EN and international Standards, special dimensions on request.

Modified PTFE reinforced with special silica filler Characteristics Protected against cold flow Excellent recovery Very good in applications with varying temperatures Reduced leakage rates compared to other filled PTFE gaskets under the same gasket stress. Technical parameters pH 0 - 14 Temperature: t = -180 … +230 °C, short term up to 260 °C Pressure: p = 55 bar Article code / Thickness FAWN 05 / 0.5 mm FAWN 10 / 1.0 mm FAWN 15 / 1.5 mm FAWN 20 / 2.0 mm FAWN 30 / 3.0 mm Main application Steel or other metal flanges on pipework Vessel Container Reactors in higher temperature applications. Suitable for Chemical and Petrochemical industry Approvals TA-Luft Form of delivery Gasket sheet size of 1,500 x 1,500 mm in thickness of 0.5 / 1.0 / 1.5 / 2.0 / 3.0 mm or cut gaskets according to drawing, or EN and international Standards, special dimensions on request.

Universal fiber based high pressure gasket­ Characteristics A perfect selection of gasket material is based on operating conditions like pressure, temperature, media, surface pressure, Nonstick coating assures quick and scaling free disassembling Do not use any surface treatment! Technical parameters Temperature: t = -100 … +200 °C, short term up to 280 °C Pressure: p = 120 bar mainapplication Tube and pipe flanges Vessels Boilers Cylinders Joints Casings Lids Suitable for All Industries Approvals DVGW KTW BAM Form of delivery Sheets 1500 x 1500 mm in thickness of 0.5/0.8/1.0/1.5/2.0/3.0 mm or cut gaskets according to drawing or EN and international Standards Special dimensions and further gasket material styles from recognised manufacturers on request.

Economical storage independent from shaft diameter, follow the packing diameter by 1.2 m-pieces Replacement for machined lantern rings Universal use, excellent chemical and thermal resistance Easy to remove with packing extractor No corrosion and wear of shafts, no canting during use Technical parameters Temperature: t = -100 … +250 °C pH 0 - 14 Main application Pumps with mechanical seals with flush port Stuffing box packings with lantern rings Suitable for All Industries Approvals FDA conformity Form of delivery 1.2 m per roll, special length 2 m on request Special sizes on request Packing dimension The hight of the lantern ring depends on the size of packing (see chart). Article (Lanternring) Height x width [mm] Height x width [imp.] STAR-AQUA BLUE 8 mm 7.6 x 11.4 0.30 x 0.45 STAR-AQUA BLUE 3/8" 9.0 x 13.2 0.35 x 0.52 STAR-AQUA BLUE 10 mm 9.4 x 13.2 0.37 x 0.52 STAR-AQUA BLUE 7/16" 10.5 x 14.3 0.41 x 0.56 STAR-AQUA BLUE 12 mm 11.1 x...

Container trolleys for boxes: This shapely and flexible trolley is solid and specifically suitable for storage and shipping areas. Its slight dimensions allow you to drive it through narrow corridors easily. Standard versions include boxes, handle on one narrow side, 4 solid rubber-tyred guide rolls (100 mm Ø), ball bearing, 2 of which featuring an arresting device. Containers with half-opened front as well as cardboard boxes of the most various sizes can take place on this solid trolley space-saving and orderly. Closed or wire sides and back walls are optionally available. Transport trolleys for stacking boxes: These mobile transport trolleys can be used to load assembly lines or as a convenient order picking assistant! These trolleys can be also delivered in a custom size (special dimensions) according to your wishes. Platform lay-up shelves with anti-slip grooved covering are also available for for the carrying of cardboard boxes, containers and many others.

Length : any Width : any Thickness : any Quality: as required, including " green " Ends : any

New standards in dynamics and efficiency. The newly developed AKL stacker crane for automatic small components warehouses has been designed and built in conformity with state-of-the-art criteria. It boasts maximum performance data and low operating costs. The AKL series is characterized by low weight, high efficiency, minimal approach dimensions and a special design that ensures optimum use of the storage space. By combining the AKL with tried-and-tested MIAS load handling attachments, it makes a major contribution to achieving the economic and functional targets of the automatic small components warehouse system.