Ring - Import export

Fiber sealing rings Flat sealing rings form A according to DIN 7603 material: VF Vulcan-Fiber working temperature: according to DIN max. +100° C Category Sealings / Vulkanized fiber sealings / Sealing rings Product number supplier 101001

Assembly immediately upon receipt of order - generally in stock assortment filling sealing rings CU - AFM DIN 7603 Form C The assortments contains: copper filling sealing rings from SF - CU ... Category Sealings / Copper sealings / Assortments / Inflation ring Product number supplier 100300

Assembly immediately upon receipt of order - generally in stock assortment filling sealing rings CU - AFM DIN 7603 Form C The assortments contains: copper filling sealing rings from SF - CU ... Category Sealings / Copper sealings / Assortments / Inflation ring Product number supplier 100300

Fiber sealing rings Flat sealing rings form A according to DIN 7603 material: VF Vulcan-Fiber working temperature: according to DIN max. +100° C Category Sealings / Vulkanized fiber sealings / Sealing rings Product number supplier 101001

Aluminium sealing rings Flat sealing rings form A according to DIN 7603 material: AL 99,5 semi - rigid = F 20, this corresponds to the hardness of 32 - 45 HB, demanded by the DIN working ... Category Sealings / Aluminum sealings / Sealing rings Product number supplier 100402

O - ring seal as flexible perfection To determine which O - ring can be used , only a few important operating parameters must be defined . The temperature , the pressure and the indication of the chemical resistance determines the selection of the correct O - ring at the right application. O - rings from Billi - seals are distinguished , depending on the material , by high thermal stability, good chemical resistance and good low temperature flexibility.

Aluminium sealing rings Flat sealing rings form A according to DIN 7603 material: AL 99,5 semi - rigid = F 20, this corresponds to the hardness of 32 - 45 HB, demanded by the DIN working ... Category Sealings / Aluminum sealings / Sealing rings Product number supplier 100402

Category Diesel technology / Sealings diesel fuel systems / Nozzle rings Product number supplier 110240

Copper sealing rings Form C according to DIN 7603 material: SF - Cu, as 0,3 mm thick sheathing and a asbestos - free filler from high temperature resistant, mineral and ceramic fiber working ... Category Sealings / Copper sealings / Copper fill rings Product number supplier 100302

Category Diesel technology / Sealings and service parts for KHD-motors / O-rings, silicon Product number supplier 120209

Copper sealing rings Form C according to DIN 7603 material: SF - Cu, as 0,3 mm thick sheathing and a asbestos - free filler from high temperature resistant, mineral and ceramic fiber working ... Category Sealings / Copper sealings / Copper fill rings Product number supplier 100302

Category Diesel technology / Sealings and service parts for KHD-motors / O-rings, silicon Product number supplier 120208

LED ring lamp of energy efficiency class A++ with push button for stepless dimming color temperature neutral white 5000 K color rendering Ra >80 power consumption 15 W protection class IP20 For fatigue-free and ergonomic precision work without irritating shading Well-balanced jointed arm with adjustable friction and large swivel range, 360° vertically rotatable; head joint 270° horizontally pivotable Large field of vision thanks to plastic lens ⌀ 160 mm with 3.5 diopters for distortion-free magnification of 190%, a cover prevents scratches and damages caused by focused light 1 plug-in power supply protection class II 100-240V, 50/60 Hz with 3 m connecting cable #b 3 interchangeable adapter EU/UK/US Mounting with adapter Compatible side adapter or Compatible table clamp adapter on request

Washers for snap-on caps. These rings are applicable for cap type: 66 Material: PA Colours: natural Ring type 67 suitable for DIN 84, 85, 96, 439, 6912, 7971, 7981, 7984, 7996 ISO 1207, 1481, 1580, 4035. Dimension A has to match the dimension A of the snap-on caps.

Washers for snap-on caps. These rings are applicable for cap types: 61, 62, 64 and 65. Material: PA Colours: natural Ring type 60 suitable for DIN 84, 85, 96, 439, 555, 558, 571, 601, 912, 931, 934, 979, 6912, 7971, 7976, 7981, 7984, 7996 ISO 1207, 1481, 1580, 4014, 4016, 4018, 4032, 4034, 4035, 4762, 7049. Dimension A has to match the dimension A of the snap-on caps.

Washers for snap-on caps. These rings are applicable for cap type: 66 Material: PA Colours: natural Ring type 69 suitable for DIN 95, 97, 963, 964, 965, 7963, 7972, 7982, 7983, 7991, 7995 ISO 1482, 2009, 2010, 7046, 7047, 7050, 7051, 10642. Dimension A has to match the dimension A of the snap-on caps.

Washers for snap-on caps. These rings are applicable for cap type: 66 Material: PA Colours: natural Ring type 66 suitable for DIN 84, 85, 96, 439, 6912, 7971, 7981, 7984, 7996 ISO 1207, 1481, 1580, 4035. Dimension A has to match the dimension A of the snap-on caps.

Washers for snap-on caps. These rings are applicable for cap types: 61, 62, 64 and 65. Material: PA Colours: natural Ring type 63 suitable for DIN 95, 97, 963, 964, 965, 966, 7963, 7972, 7982, 7983, 7991, 7995, 7997 ISO 1482, 2009, 2010, 7046, 7047, 7050, 7051, 10642. Dimension A has to match the dimension A of the snap-on caps.

Washers for snap-on caps. These rings are applicable for cap types: 61, 62, 64 and 65. Material: PA Colours: natural Ring type 61 suitable for DIN 84, 85, 96, 439, 555, 558, 571, 601, 912, 931, 934, 979, 6912, 7971, 7976, 7981, 7984, 7996 ISO 1207, 1481, 1580, 4014, 4016, 4018, 4032, 4034, 4035, 4762, 7049. Dimension A has to match the dimension A of the snap-on caps.

Washers with flange Wall thickness: 8.13 mm Material: LDPE Colour: yellow

Pre-Loaded Packing Ring in Metal Casing Characteristics WDR-rings are ready-to-fit sealing elements for shafts and axles The wide sealing surface offers extra protection against early wear on the shaft and as well on the seal WDR rings are located in the housing with interference fit. The sealing effect is facilitated through the pre-loaded encapsulated packing. Different packing styles can be utilized depending on application Housing Standard: St 1403 galvanized Special: e.g. VA (1.4301) - CrNi Standard Insert P1P Budget to +200 °C Main application Crank and drive shafts Guiding shafts Axles, spindles and similar equipment Sealing against fluid leakage and dust penetration Protection for bearings and drive units Suitable for All Industries to seal against fluid loss or protect against dust and dirt ingress. Variant Special variantes: A 22 up to +450 °C for high temperature application S 7/G up to +250 °C for applications in abrasive environment etc. The packing insert...

Expanded natural Graphite in Purity 98 % – industrial grade or 99.85 % nuclear grade (chlorine content < 20 ppm) Temperature in steam Density min. 1.40 g/cm 3 Characteristics High cross section density Self lubrication and limited wear Dry running capability Coefficient of thermal expansion similar to steel Maintenance free and elastic, also under variable pressure Non ageing, high chemical resistance Attention! Precise tolerances and surfaces of application are requeste Operating range Pressure [p max]: 800 bar Temperature: t = -200… +550 °C pH: 0 - 14 Density: 1.80 g/cm³ Temperature in steam Density min. 1.40 g/cm 3 Main application Fittings Pumps (high temperature) Covers Valves Suitable for Valves and fittings of all Industries Approvals Oxygen BAM 200 °C/250 bar DVGW and KTW Variant Rings with integrated reinforcement or endcaps made from ANSI 316 Special quality TA Luft 300 with a leakage rate of 5.7 · 10 -3 mbar · l/(s·m) 300 °C Form of delivery ARF rings - endless,...

Safety hand-, head- and manhole seal made of biaxially expanded PTFE Characteristics Chemical universal resistance according to TRD 611 High adaptive FDA conform No hardening, does not stick to surfaces Technical parameters Temperature: t = +250 °C Pressure: p = 40 bar Main application For the application in hand-, head- and manhole opening at hotwater-, pressure and steam vessels of all kind. Suitable for Safety Gasket for Steam Boilers and Vessels As well suitable for cold pressure test Approvals TRD 401 / VdTÜV Dichtung 100 Klasse D

Application specific ring sets Improved properties are: Extrusion resistance, if high pressures have to be sealed and/or bigger gaps than the normally recommended max of 25 of the packing size are found. Wiper function, if any micro scaling is found on the stem and at reciprocating movement with control valves Blow out safety, when sealing high compressed gases and fumes Pliability, with low gland forces as well good reset and adaptability for example in applications with temperature cycles. Ring Set 3335 For Control Valves up to 400 °C. Ring Set 6655 For Control Valves and staem applications up to 600 °C steam. All rings are delivered as standard in skive cut. Ring Set 6660 For Valves up to 650 °C steam. This ringset offers minimal volumeloss. The rings in the sealing zone are split as standard in 2 halves or as option delivered with a skive cut. Top and bottom ring are delivered with skive cut. Soot Blower Ring Set For soot blower applications with steam temperature up to...

With ABANO nozzle technology, approx. 15% less drive power is required. The power not required can additionally be used in the suction area. The cross-sectional area of the nozzle inserts is also reduced by approx. 15%, which creates an increased pressure size at the insert (low back pressure approx. 1 bar).

Continuous gear honing is mainly used in the automotive industry as an alternative to generating grinding. This type of tool is also available as a set with DDG and integrated tip dressing roll. Diamond dressing gears produce the expected geometry precisely and fast and guarantee the demanded quality on the workpiece.

Suction capacity 125 to 1400 m³/h; Vacuum to 33 mbar abs.; Discharge pressure to 2.0 bar abs. The NASH 2BM1 magnetic drive pump series is capable of achieving volume flow rates of 125 to 1400 m³/h and vacuum of 33 mbar abs. Non-contact torque transmission is achieved by using a permanent magnetic drive system. The pump's inner working space is hermetically sealed from atmospheric conditions, eliminating any possibility of leakage. This seal is essential for demanding applications, such as processes that are required to meet the most stringent standards on environmental compatibility. ATEX applications are also possible, certifications are available.

This rugged and reliable liquid ring compressor expaned the NASH Vectra compressor range with a model that operates at up to 4 bar G (60 PSIG). The XM-150 comes in 681 and 682 compliant versions and is specifically designed for the higher pressures and performance requirements found in many process applications, including vapor recovery, flare gas recovery, biogas, corrosive gas handling (e.g. VCM and chlorine) and hydrogen compression. The NASH Vectra XM-150 liquid ring compressor provides the same quality and reliability you've come to expect from the existing Vectra series with these features: Single, conical port design; Between bearing rotor/shaft design; single pressure boundary sealing point; API-681 and API-682 category II/III compliance; increased bearing life; 316 stainless steel construction; and horizontal, self-draining inlet/discharge nozzles. The rugged construction and easy to service design of this liquid ring compressor reduces maintenance requirements and minimizes downtime for maintenance and repairs in even the most demanding applications.

15 - 140 CFM / 35 to 210 m³/h Designed from the ground up to meet the widespread needs of the process industry, the Vectra SX adds five models to Nash’s Vectra series in the 1 ½ to 10 HP range at 60 Hz (0.75 to 5.5 kW at 50 Hz), providing the right solution for small capacity vacuum pump requirements. Designed to use less energy and consume less operating liquid than competitive models, it is possible to save the user as much as 40% on power consumption and 50% on water usage.