Mounting accessories - Import export

The detachable plastic submersible probe LMK 808 was developed for level measurement in water and wastewater. The basis of the probe is an extremely robust, almost maintenance-free capacitive ceramic sensor. For level measurement in river courses, on weir systems or in locks, great emphasis was placed on overvoltage / lightning protection. In addition, the cable can be protected against bites if necessary. The sensor head can be separated from the cable part and can therefore be replaced if necessary without time-consuming assembly work. Features: — nominal pressure: 0 ... 1 mH2O bis 0 ... 100 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 35 mm — diaphragm ceramics Al2O3 (99.9 %) — excellent long term stability — integrated lightning protection 8 kA gas discharge tube (8/20µsec); 4 kV surge l-l/l-e according to EN61000-4-5 Optional Features: — mounting accessories — different kinds of elastomer

The LMP 308i is designed for continuous fill level and level measurement of water and liquid mediums. The signal processing of sensor signal is done by digital electronics with 16-bit analog digital converter. Consequently it is possible to conduct an active compensation of sensor intrinsic deviations from normal condions like nonlinearity and thermal error. In order to facilitate stock-keeping and maintenance the transmitter body is plugged to the cable assembly with a connector and can be changed easily. Features: — nominal pressure: 0 ...4 mH2O up to 0...200 mH2O — accuracy: 0.1 % FSO — diameter 35 mm — cable and sensor section separable — thermal error in compensated range -20...70°C: 0.2 FSO TC 0.02% FSO/10K 0,02 % FSO / 10K — high accuracy — communication connection — turn-down 1:10 Optional Features: — IS-version — mounting accessories as cable gland and terminal clamp in stainless steel

The separable stainless steel probe LMK 358H has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: — nominal pressure range 0 ... 60 cmH2O up to 0 ... 100 mH2O — accuracy: 0.1 % — diameter 39.5 mm — cable and sensor section separable — HART®-communication (setting of offset. span and damping) — permissible temperatures up to 85 °C — high long term stability Optional Features: — IS-version Ex ia = intrinsically safe for gas and dust — cable protection via corrugated pipe — diaphragm (AI2O3 99.9 %) — accessories e.g. mounting flange with cable gland and terminal clamp

monitor suspension arm incl. cable management cover for mounting of heavy monitors with 6 - 12 kg, 360° mounting flange can be attached lateral or transverse to the profile mounting plate VESA MIS-D 75/100 compatible, adjustable viewing angle and height; accessories included: mounting flange incl. bolt and cover cap Nutfixierungsplatten screws & nuts centering plates, anti-loss washers, anti-loss washers

Adjustable feet in over 20,000 variations — fixed adjustable foot — hinged adjustable foot function: — screw-on (with screw-on hole/with extension arm/through accessories: floor mounting for trapeze plate) — levelable — swiveling — anti-slip (by accessories: anti-slip plate made of thermoplastic elastomer) — EDS-capable Plate shape and size: — Round — Trapezoidal shape — Square — Diameter 20 mm to 120 mm other shapes on request Material plate: — Plastic PA, glass ball reinforced — steel, galvanized — zinc die casting — stainless steel other materials and surfaces on request Threaded rods for adjustable feet with/without ball head — swivel range 0° - 20° degrees — M5, M6, M8, M10, M12, M14, M16, M20, M24, M30 — Length: 20 - 300 mm — Alternative: ball head with internal thread — Material: galvanized steel, stainless steel Colors: black, silver, other colors on request

TECHNICAL DATA Max. cable diameter : 210 mm Suitable for sea cables with steel armouring Accessories: Mounting Cutting power with 850 bar Weight: 70 kg Size: 340 x 150 x 925 mm design by Fred Wolf

regulated Wide range input 2:1 PI-Input filter Efficiency up to 82% Short-circuit proof 24-pin DIL-Grid Electrically isolated 500VDC min. Option H: 3kV Optional: accessories for screw mounting or clip fastening to TS35-rail as per EN60715 Optional: SMD Version when ordering addition SMD or article number/SMD Option M: metal housing

Wide range input 2:1 2''x2'' housing PI-Input filter Efficiency up to 82% Short-circuit proof Operating temperature -25~+71°C Electrically isolated 500VDC min. Optional: accessories for screw mounting or clip fastening to TS35-rail as per EN60715 Option M: metal housing regulated

150 - 3000 CFM The pre-engineered VectraPaks are a versatile and readily available system for any industrial vacuum need. The Vectrapak comes with the accessories already mounted and piped for ease of installation. They are available from 150 to 3000 ACFM, suitable for operation to 29" HgV, and are available in both iron and stainless steel construction.

40-150 CFM Pre-engineered SX Packages are a versatile and readily available system for any industrial vacuum need. The SX Packages come as either once-through or recirculated packages with the accessories already mounted and piped for ease of installation. Built with Nash patented gas scavenging, to increase high vacuum performance, they are available from 40 to 150 ACFM (70-250 m3/hr), suitable for operation to 29" HgV (31 mbar abs), and are available in cast iron construction.