Mounting accessories - Import export

You can choose from a wide range of accessories for operation, mounting and protection of sensors. The range comprises functional accessories and actuators, accessories for simple and safe mounting as well as safety accessories for protection against mechanical load.

The BL ident® connectivity portfolio offers field-wireable extension cables in various versions (Standard, Economy and Food & Beverage) for the secure communication between interface and read/write head as well as field-wireable bus and supply lines. The accessories include mounting adapters for read/write heads and tags, as well as protective frames for read/write heads. In addition, the portfolio also includes handheld readers for mobile reading and writing of data carriers.

We offer the matching accessories for quick mounting, simple parameterization and safe protection of interface modules. From cage clamps, programming adapters and power buses up to the IP67 rated housings: Each item is perfectly tailored to the interface module series IM, IME and IMC, making installation and commissioning of your application easy.

E2 micro E-Chains® are very small, one-piece and two-piece (B07/B09) E-Chains® with a low weight and therefore ideal for highly dynamic applications. E2 micro E-Chains® are stable and available in many versions. igus® also offers numerous accessories and mounting options. "UPGrades" of the snap-open versions are available for many types; they are interchangeable among themselves and can thus be used as, among others, spare parts pack for new installation options. Other information Series 03 Inner height hi: 5 mm Inner widths Bi: 5 - 10 mm bending radii R: 10 - 28 mm Pitch: 10 mm E-Chain®, not-to-be-opened Series 04 Inner height hi: 7 mm Inner widths Bi: 7 - 30 mm bending radii R: 15 - 48 mm Pitch: 16,7 mm E-Chain®, not-to-be-opened Series 045 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, not-to-be-opened Series 05 Inner height hi: 10 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 06 Inner height hi: 10,5 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 08 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 25 - 48 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series B07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series B09 Inner height hi: 14,3 mm Inner widths Bi: 16 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series 074 Inner height hi: 10.9 mm Inner widths Bi: 10 - 40 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series 094 Inner height hi: 14,3 mm Inner widths Bi: 10 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series E2.10, openable along the outside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 10, openable on the inside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 10, closed Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, closed Series E2.15, openable along the outside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 15, openable on the inside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 15, closed Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 75 mm Pitch: 20 mm e-chain®, closed iF-Design-Award for E2 micro Series 05 Clean room test on request Special design: Electrically conductive ESD/Atex versions on request UL94-V0 classification for Series 03 and Series 14 (more on request) 42 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 06.10.038.0 E2 micro E-Chains® are very small, one-piece and two-piece (B07/B09) E-Chains® with a low weight and therefore ideal for highly dynamic applications. E2 micro E-Chains® are stable and available in many versions. igus® also offers numerous accessories and mounting options. "UPGrades" of the snap-open versions are available for many types; they are interchangeable among themselves and can thus be used as, among others, spare parts pack for new installation options. Series 03 Inner height hi: 5 mm Inner widths Bi: 5 - 10 mm bending radii R: 10 - 28 mm Pitch: 10 mm E-Chain®, not-to-be-opened Series 04 Inner height hi: 7 mm Inner widths Bi: 7 - 30 mm bending radii R: 15 - 48 mm Pitch: 16,7 mm E-Chain®, not-to-be-opened Series 045 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, not-to-be-opened Series 05 Inner height hi: 10 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 06 Inner height hi: 10,5 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 08 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 25 - 48 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series B07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series B09 Inner height hi: 14,3 mm Inner widths Bi: 16 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series 074 Inner height hi: 10.9 mm Inner widths Bi: 10 - 40 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series 094 Inner height hi: 14,3 mm Inner widths Bi: 10 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series E2.10, openable along the outside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 10, openable on the inside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 10, closed Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, closed Series E2.15, openable along the outside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 15, openable on the inside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 15, closed Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 75 mm Pitch: 20 mm e-chain®, closed E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the E2 micro E-Chain®. Assembly Instructions Application examples Applications in various industrial sectors. E2 micro For restricted spaces One and two-piece E-Chains®, from 5 mm inner height High torsion resistance Smallest inner heights and bending radii Mounting brackets with strain relief optional Small pitch for silent operation Cable-friendly interior Low weight Large pins for a long service life Favorable internal/external dimensions ratio B07/B09 in two parts - Can be folded out in outer radius due to integral hinges Typical industrial sectors and applications General construction machinery Models (micro E-Chain®), Automatic doors Vehicles Measuring machines Electronics Handling systems Pick and place robot iF-Design-Award for E2 micro Series 05 Clean room test on request Special design: Electrically conductive ESD/Atex versions on request UL94-V0 classification for Series 03 and Series 14 (more on request) 42 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 06.10.038.0

Bracket for wall mounting the E3/DC S10 Mini System.

Tablet holder expands range of RK monitor mounting accessories The tablet holder allows the quick and easy mounting of display devices (tablet PC, iPad, display, etc.) on the machine The tablet holder can be mounted directly on the fastening flange of the RK monitor mounting. The required fastenings are included in the scope of delivery. The clamping area of 125 – 200 mm (4.8 – 7.8") can be infinitely adjusted using a manual control knob. Foam cushions ensure the secure fastening of the tablet/display (max. thickness 13 mm).

The CQ series cylinders are manufactured according to ISO 15552 and have diameters between 160 and 250 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available.

Diameter 32-63mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available.

Pneumatic standard cylinder according to DIN / ISO 6432. Available in diameters between 8 and 25 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available.

Robust and economic plastic handwheel. Various sizes. Hub made of zinc-coated steel for high stability and easy shaft mounting. Various hub versions. With thread for mounting a turning handle (see accessories).

Adjustable, Without Free Travel Compression Force max. 50,000 N Stroke 100 mm Motion control in both directions: The HBD model of hydraulic dampers can be adjusted independently in both the push and pull direction. These maintenance-free, ready-to-install and closed systems leave no prayers unanswered as far as the setting of retraction and extension speeds are concerned. In addition each damper works without any free travel therefore the flow of oil can be regulated exactly via the two precision metering orifices. Adjustment can be made once installed and even when moving through stroke. The coated body and hard-chromed piston rods stand for quality and long service life. The variety of mounting accessories makes assembly easy and the high-end hydraulic dampers universally usable.

Adjustable, Without Free Travel Compression Force max. 10,000 N Stroke 100 mm Motion control in both directions: The HBD model of hydraulic dampers can be adjusted independently in both the push and pull direction. These maintenance-free, ready-to-install and closed systems leave no prayers unanswered as far as the setting of retraction and extension speeds are concerned. In addition each damper works without any free travel therefore the flow of oil can be regulated exactly via the two precision metering orifices. Adjustment can be made once installed and even when moving through stroke. The coated body and hard-chromed piston rods stand for quality and long service life. The variety of mounting accessories makes assembly easy and the high-end hydraulic dampers universally usable.

Adjustable, Without Free Travel Compression Force max. 6,000 N Stroke 50 mm Motion control in both directions: The HBD model of hydraulic dampers can be adjusted independently in both the push and pull direction. These maintenance-free, ready-to-install and closed systems leave no prayers unanswered as far as the setting of retraction and extension speeds are concerned. In addition each damper works without any free travel therefore the flow of oil can be regulated exactly via the two precision metering orifices. Adjustment can be made once installed and even when moving through stroke. The coated body and hard-chromed piston rods stand for quality and long service life. The variety of mounting accessories makes assembly easy and the high-end hydraulic dampers universally usable.

Adjustable, Without Free Travel Compression Force max. 2,000 N Stroke 50 mm Can be regulated separately in any stroke position: The hydraulic dampers in the DVC-32 model are the first model to have the ability to have the in and out speeds adjusted independently from the outside and therefore more precisely. With their individual adjustment segments for the push and pull direction as well as the double-sided action, these are suitable as safety or control elements. The great number of mounting accessories makes assembly of these hydraulic dampers by ACE easier and allows these maintenance-free, ready-to-install and self-contained systems universally applicable. Qualitatively high grade, and at the same time simple to use; one of their uses is to absorb swinging loads.

Adjustable, Without Free Travel Compression Force max. 2,000 N Stroke 50 mm Can be regulated separately in any stroke position: The hydraulic dampers in the DVC-32 model are the first model to have the ability to have the in and out speeds adjusted independently from the outside and therefore more precisely. With their individual adjustment segments for the push and pull direction as well as the double-sided action, these are suitable as safety or control elements. The great number of mounting accessories makes assembly of these hydraulic dampers by ACE easier and allows these maintenance-free, ready-to-install and self-contained systems universally applicable. Qualitatively high grade, and at the same time simple to use; one of their uses is to absorb swinging loads.

TDS 100 Electric Fan Heater The TDS 100 electric heater provides a heating performance between 11 kW and 22 kW in 3 stages (stage 1 only fan). Furthermore the TDS 100 has an integrated thermostat for continously adjusting of the desired temperature. Benefits in pratice: 100% TROTEC - development, design, production Multistage temperature control Integrated room thermostat for constant, cosy warmth Overheat protection Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 100 is suitable for uses in enclosed rooms Wall and ceiling bracket available - mounting is available as an accessory Fan function Place-saving stackable Fields of application: Building container Garages Gastronomy Greenhouses Marketplaces Storerooms and workshops Boathouses Workshops Shipbuilding and counting...

The CZ series cylinders are manufactured according to ISO 15552 and have diameters between 32 and 125 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available. Also available in a special version, as a tandem cylinder or with Viton seals for high temperatures. Version with weight-optimized lightweight profile tube including practical slot for position sensors.

This high-precision torque sensor can be used to perform both static and dynamic measurements on non-rotating parts. The internal and external square drive design make this sensor especially easy to fit in existing or new screw-fitting applications. Quality assurance and monitoring of screw-fastening tools are just two applications that can take full advantage of sensor features such as USB port, built-in amplifier and side-load absorbing bearings. With no rotating parts, this sensor needs no maintenance when used correctly. Available accessories include mounting brackets and flange adapters, which enable quick, easy and practical integration of the sensor into existing or newly developed setups and test benches. The strain-gauge based sensor’s modular design allows precise configuration for the desired application. With the integrated amplifier option, the sensor directly supplies a voltage signal of 0 ... ± 10 V that is proportional to the torque.

TDS 50 Electric Fan Heater The TDS 50 electric heater provides a heating performance between 4.5 kW and 9 kW in 3 stages (stage 1 only fan). Furthermore the TDS 50 has an integrated thermostat for continously adjusting the desired temperature. In comparison to direct fired gas or oil heaters, the electric fan heaters of the TDS series dont consume oxygen or produce combustion gases. Because of that this devices can be used everywhere, in particular for temperature control of unheated interiors. Benefits in pratice: 100% TROTEC - development, design, production Multistage temperature control Integrated room thermostat for constant, cosy warmth Overheat protection Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 50 is suitable for uses in enclosed rooms Wall and ceiling bracket available - mounting is available as an accessory

Maximum heat dissipation using PC board heat sinks in minimal board space. Seifert electronic GmbH offers custom heat sinks for use in the board area – precisely measured and flexibly adapted to your requirements. The wide standard range of Seifert electronic includes PC heat sinks in all common designs. We provide various heat sink models such as snap-on heat sinks made of strip material, extruded heat sinks, die-cast heat sinks, as well as finger heat sinks and U-shaped heat sinks, along with the corresponding accessories like mounting clips for fastening. Extruded profile heat sinks are considered classics among PC board heat sinks. We gladly recommend them for use in the board area as they are versatile and can dissipate relatively large amounts of heat.

The detachable plastic submersible probe LMK 808 was developed for level measurement in water and wastewater. The basis of the probe is an extremely robust, almost maintenance-free capacitive ceramic sensor. For level measurement in river courses, on weir systems or in locks, great emphasis was placed on overvoltage / lightning protection. In addition, the cable can be protected against bites if necessary. The sensor head can be separated from the cable part and can therefore be replaced if necessary without time-consuming assembly work. Features: — nominal pressure: 0 ... 1 mH2O bis 0 ... 100 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 35 mm — diaphragm ceramics Al2O3 (99.9 %) — excellent long term stability — integrated lightning protection 8 kA gas discharge tube (8/20µsec); 4 kV surge l-l/l-e according to EN61000-4-5 Optional Features: — mounting accessories — different kinds of elastomer

The LMP 308i is designed for continuous fill level and level measurement of water and liquid mediums. The signal processing of sensor signal is done by digital electronics with 16-bit analog digital converter. Consequently it is possible to conduct an active compensation of sensor intrinsic deviations from normal condions like nonlinearity and thermal error. In order to facilitate stock-keeping and maintenance the transmitter body is plugged to the cable assembly with a connector and can be changed easily. Features: — nominal pressure: 0 ...4 mH2O up to 0...200 mH2O — accuracy: 0.1 % FSO — diameter 35 mm — cable and sensor section separable — thermal error in compensated range -20...70°C: 0.2 FSO TC 0.02% FSO/10K 0,02 % FSO / 10K — high accuracy — communication connection — turn-down 1:10 Optional Features: — IS-version — mounting accessories as cable gland and terminal clamp in stainless steel

The separable stainless steel probe LMK 358H has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: — nominal pressure range 0 ... 60 cmH2O up to 0 ... 100 mH2O — accuracy: 0.1 % — diameter 39.5 mm — cable and sensor section separable — HART®-communication (setting of offset. span and damping) — permissible temperatures up to 85 °C — high long term stability Optional Features: — IS-version Ex ia = intrinsically safe for gas and dust — cable protection via corrugated pipe — diaphragm (AI2O3 99.9 %) — accessories e.g. mounting flange with cable gland and terminal clamp

conFORM is an extremely robust EMC enclosure, which features EMC shielding without an expensive conductive gasket as standard. Continuous contact is created by means of a patented tooth system contour between the lid and bottom. It is ideal for industrial internal mounting that requires special EMC protection. The enclosure is water-tight and weather resistant. The interior contains fastening domes to accommodate mounting plates, supporting rails or circuit boards. Accessories such as mounting plates and cable glands are included in the ROLEC product range.

handCASE is an extremely robust hand held enclosure made from die-cast aluminium. Thanks to its ergonomic design, the enclosure fits well in your hand. The special wall strength of the enclosure provides solid protection for internal mounting under the most extreme conditions. The heavy-duty enclosure has ingress protection of IP 66 and is available with or without a battery compartment. In the interior of the enclosure are fastening domes for the installation of circuit boards, mounting plates and other internal mounting. Cable glands and other accessories are also available.

aluPLUS is a modern enclosure made from die-cast aluminium for industrial electronics and electronic applications. It is available in the usual standard industrial sizes for the attachment of terminals, PCBs or mounting plates. The areas of application are numerous. aluPLUS is suitable for attachment to the wall outside and for industrial electronics and mechanical engineering. The lid has a recess to accommodate membrane keypads or front plates. The design covers cover the screws of the wall and lid attachment and give the enclosure an attractive appearance. The enclosure should be mounted while closed. Integrated M5 fastening threads in the bottom and lid offer optimum fastening options for a wide range of internal mountings. Extensive range of accessories and matching cable glands are also available.

starCASE is a true multipurpose enclosure made from flame-retardant Luran. starCASE is ideally suited for almost every kind of application and also a perfect enclosure for the visual range thanks to its ergonomic and modern design. There are numerous fastening options: be it wall, ceiling, sheet piling or machine fastening – everything is possible. The integrated recess in the lid enables films, membrane keypads or front plates to be attached easily – depending on individual requirements Beneath the design covers on the curves of the enclosure are lid screws and separate screw channels for fastening the enclosure. These enable the housing to be attached with the lid closed. Practical lid supports provide simultaneous strain relief for the internal lid mounting. An optional lid lock prevents unauthorised access to the internal mountings. Matching accessories and cable glands are also available.

TECHNICAL DATA Max. cable diameter : 210 mm Suitable for sea cables with steel armouring Accessories: Mounting Cutting power with 850 bar Weight: 70 kg Size: 340 x 150 x 925 mm design by Fred Wolf

1.5 mm strong sendzimirgalvanised sheet steel or 1.25 mm strong stainless steel fixed tension spring for front frame depths between 2050 mm centring for central alignment of filters flat profile gasket or insert profile gasket high holding force of fixed springs mounting accessories for filter wall or Vshaped filter design available usable up to filter class F9