Precision - Import export

Whether it is canisters, large containers, drums or pallets, from barrels to aerosols – the new labeling system ALS 209 from NOVEXX Solutions will win you over with its labeling of a wide variety of products and packaging units. The ALS 209 applies labels with a very large width (up to 229 mm or 9 inches) and is extremely precise and reliable, even in harsh environments. Moreover, due to its extreme compactness, the ALS 209 can be used in a very flexible way. And thanks to its optional tandem function, down time when changing the material is a thing of the past. With the ALS 209, NOVEXX Solutions provides a very efficient and at the same time economically profitable labeling system. Whether it is canisters, large containers, drums or pallets, from barrels to aerosols – the new labeling system ALS 209 from NOVEXX Solutions will win you over with its labeling of a wide variety of products and packaging units.

SPIROL specializes in the custom manufacturing of tightly toleranced Precision Shims, Specialty Washers and Thin Spacers. SPIROL produces Shims custom-made to customer specifications in thicknesses ranging from 0.02mm up to 9.5mm (.001" up to .375") using a variety of stamping methods, machining processes and laser technology to meet your specific lead time and total cost considerations. Whether a project is for prototype, short run or long-term requirements, SPIROL has a solution to minimize costs by controlling - or even eliminating - tooling costs. In addition to having flexibility in our primary operations, SPIROL also performs most secondary processes in-house including heat treating, grinding, lapping, high speed polishing deburring, finishing and passivation.

The rubber processing industry, as well as the tire production process is supported by Micro-Epsilon with a range of systems for inspection, monitoring and control of miscellaneous processes.

The thicknessGAUGE O.IMS is used for stable thickness measurement of coating on separator film. The system is designed as a compact O-frame and uses a white light interferometer that traverses over the battery film. Thanks to the innovative technology, the thickness measurement is contactless from only one side. Two transport rollers stabilize the film belt.

White light interferometers use infrared light in the non-visible range (approx. 840 nm wavelength), which means that the measurement position cannot be seen. To visualize the measuring position, Micro-Epsilon systems are equipped with a pilot laser which projects a light spot onto the measuring position. In addition, the pilot laser uses a patented method to provide feedback on the distance in addition to the measurement position. If the measuring object is at the correct distance and within the measuring range, a constant glow is emitted by the pilot laser. If the measuring object is outside the measuring range, the pilot laser flashes.

The optoNCDT 1320 is a new laser triangulation sensor with compact size for displacement, distance and position measurements. Due to its extremely compact size including integrated controller, the sensor can also be integrated into restricted installation space. Its low weight make the optoNCDT 1320 ideally suitable for applications where high accelerations occur, e.g., on the robot arm or in pick-and-place machines. The optoNCDT 1320 offers high accuracy and adjustable measuring rates up to 4kHz. The Active Surface Compensation (ASC) provides stable distance signal control regardless of target color or brightness. Very small objects can be detected reliably due to the small measurement spot size.

P-series draw-wire sensors are designed for industrial measurement tasks. A compact and robust aluminum housing protects the sensor from mechanical influences. As well as analog versions with potentiometer, current or voltage output, digital versions with incremental or absolute encoders are available, providing measuring ranges up to 50 m.

The dimensionCONTROL TMWI 8302.LC system is suitable for the inline weight inspection of continuous running rubber profiles (tread pattern or sidewalls) for passenger and truck tires. Based on the force measurement principle, the inspection system uses two load cells which measure the deflection of the measurement conveyor. These sensor elements are attached to a massive construction, which ensures a long-term mechanical stability of the system. The measurement conveyor uses precise and balanced aluminum rollers with special surface treatment. This ensures a low deadweight, avoids influence of unbalance and eliminates material sticking. Data obtained from the load cells are processed in the implemented PLC cards which determine the measured weight mathematically.The software included offers a variety of measurement data processing, definition of design profiles, statistical analysis of measured profiles and diagnostic tools.

The current series TSA, TSI, TSP, TSAV,of the external-driven GMN tool spindles follow the first grinding spindles made by GMN in the 1930s. Then and today, we provide simple, but robust and functional spindles that reliably fulfill their tasks. Depending upon the customer’s tool selection, spindles are available with various tool holders.

The capaNCDT CST6110 is a capacitive rotation speed sensor system for counting tasks and rotational speed measurements of any type. The industrial measuring system consists of a dust proof, water tight controller and a compact sensors which can be integrated in confined spaces. The rotation speed sensor is used in centrifugal test benches, balancing machines, generators and engines, as well as shafts and drives. The CST6110 detects and counts blades, gearwheels and nubs with the highest precision and stability even in dusty, oily environments.

Based on our many years of experience in developing and manufacturing high-quality machine components, GMN has specialized in the area of high-precision ball bearings as well as the production of high-performance and long-lived deep groove and spindle ball bearings to meet – or even exceed – the highest precision classes P4 and ABEC 7. Certification under international standards ensures the highest precision in the development and manufacturing of GMN ball bearings and guarantees constant, outstanding qualities related to speed suitability, stability and longevity. The broad product range includes a large selection of standard solutions as well as requirements-tailored special designs.

GMN offers a complete range of sizes, types and designs with its spindle ball bearings in standard sizes S, SM and KH. In conventionally oil-lubricated spindle bearings, lubricant is supplied through a lateral oil supply. GMN spindle bearing designs +A, +AB, +L and +LB provide direct oil supplies to the lubrication point through a bore in the outer ring. GMN spindle bearing designs +AG ensure the highest possible machine running times without complex oil supply systems. These feed the lubricant directly into the lubricating point through holes in the outer ring. The developed high-performance, separable BNT and BHT designs ensure fast and uncomplicated handling, especially with regard to assembly and maintenance.

The use of high-precision radial groove ball bearings is especially recommended when axial forces are supported in two directions, but the installation space makes the use of a spindle bearing pair impossible; plus when the best-possible guide for rotating components is needed, but the RPM requirements are less important. Depending upon the load capability and the installation space available, GMN provides deep groove ball bearings in sizes 60 and 62 as per DIN 625. A large selection of various cages, lubricants and covers make it possible to adapt GMN deep groove ball bearings to any application.

eddyMOTION is a Windows-based analysis and configuration tool for eddy current probes. In combination with the TX electronics from eddylab GmbH, the software tool combines several performance features: The functional areas oscilloscope, FFT analysis, data logger and waterfall diagram, enables the visualization and documentation of mechanical movements. eddyMOTION also suites the on-site linearization of eddy current sensors in a traceable manner, without external assistance. In addition to the TX electronics and an eddylab eddy current sensor, a reference probe is required for this purpose: Together with the eddy current sensor, this probe measures the distance to the same material, with the reference probe serving to check the sensor.

The optoCONTROL 2700 is a compact LED micrometer for the precise measurement of diameter, gap, edge and segment. The micrometer is characterized by its high accuracy with a measuring range of 40 mm. As the controller is integrated in the receiver, the cabling and installation work is reduced to a minimum. Thanks to the active inclination correction, objects tilted by up to 45° are also detected extremely precisely. The configuration is performed conveniently via the web interface and enables the parameters set up of video signal, filter and different measuring modes. In set-up mode, a shadow image can be used for simple alignment of the measuring object. The excellent price-performance ratio rounds off the service package.

The optoCONTROL 2520 is a compact laser micrometer with integrated controller. A high resolution, model variant with measuring ranges of 46 mm and 95 mm as well as variable mounting distances allow a wide range of applications in quality monitoring and production control. The measurement object can be placed at any position within the light curtain and the distance from transmitter to receiver can be freely selected.

Optical micrometers from Micro-Epsilon operate according to the transmitted light principle (ThruBeam micrometer). Here, the transmitter produces a parallel light curtain that is transmitted via a lens arrangement into the receiver unit. The beam is interrupted if an object is in the light path. The resulting shadowing is detected by the receiving optics and output as measurement value. Most optical micrometers are used for dimensional measurements in production, machine monitoring and quality assurance. Parameters such as diameter, gap, height and position are detected with high accuracy.

SPIROL’s GD100 Ground Hollow Dowels are designed to be direct replacements for Ground Solid Dowels manufactured per ISO 8734 when used in alignment applications. This innovative product is manufactured from strip steel, and then OD ground to achieve extremely tight diameter tolerances that enable critical alignment up to 20µm. The main advantage of the GD100 Ground Hollow Dowel is its ability to achieve the same alignment as the Ground Solid Dowel with a significant reduction in cost due to its hollow construction. In most scenarios, the Ground Hollow Dowel is approximately 50% lighter and at least 30% less expensive than the solid equivalent. If installation equipment is required, SPIROL also offers a standard comprehensive line of Installation Equipment from manual to fully automatic modules, with or without out fixturing, to support your assembly requirements.

The optoCONTROL 1200 is based on the principle of light quantity measurement. The compact laser micrometer has all the evaluation electronics integrated in the case and the mounting is very flexible. High dynamic applications can be measured due to the measuring rate of 100 kHz.

Olay Total Effects is a renowned skincare product that offers multiple benefits to the skin. This advanced formula is designed to address seven signs of aging, including fine lines and wrinkles, uneven skin tone, age spots, dullness, dryness, and visible pores. The Total Effects range includes various products such as moisturizers, serums, cleansers, and eye creams. One of the key features of Olay Total Effects is its powerful anti-aging properties. The formula contains a blend of vitamins and antioxidants that help to reduce the appearance of wrinkles and fine lines, promoting a more youthful complexion. It also helps to even out skin tone and fade age spots, resulting in a more radiant and even complexion.

Suitable for removal of varnish, oil paints, synthetic resin paints, dispersion paints and for cleaning stone hard brushes (not plastic bristles). The stripper also dissolves several layers in one operation. Substrates made of wood, metal and masonry are not attacked. Plastics and non-solvent-resistant substrates can be attacked.

This laser cutting device can be programmed quickly, which makes it the ideal tool for fast manufacturing small quantities. Draw - convert - cut. The cutting paths generated by CAD are converted in minutes and can be cut directly. A nesting tool (option) makes full use of its advantages, particularly in series production. It ensures optimal use of material so that no material is wasted unnecessarily. The AC requires a small footprint of 1340 x 1180 mm but offers a spacious work area with 500 x 500. Sheets of any length can be processed because there is a feedthrough on the back.

Engineering-processes in aviation are among the most challenging we handle. Complex components for extreme applications and increasing requirements for material and energy efficiency shape development and manufacturing. Manufacturing precision components demands perfection in each individual production step. We support the entire production process with systems for all chemical and electroplating processes (including degreasing, etching, staining, hard chromium plating, nickel coating) and selected testing processes – from design to installation and maintenance. Almost all of our orders involve implementing complex and highly individual customer requirements. This results in custom-tailored, specialized solutions reflecting not only our experience and high commitment to quality, but also our profound flexibility.

Wooden Precision Parts Our specialty includes precision parts and custom-made products made out of wood according to your wishes and specifications. Our technical equipment allows us the following: Turned parts from Ø 10mm to 60mm Rings from Ø 30mm to 110mm Milled parts up to 70mm Sawed parts Holes in various diameters

Compact braided square and rectangular copper flexibles made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys (upon request) in bare, tin-plated or silver-plated. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.20 mm. Cross-section ranging from 0.47 mm² to 50 mm² (further dimensions upon request). Square copper braids require less space in comparison to round copper braids with the same cross-section. There is a precise positioning owing to square or rectangular shape, which allows for failure-free and fully automated downstream manufacture. Squre or rectangular copper braids are characterised by very good Flex life, being absolute free from twist, a compact cutting surface, a very high degree of dimensional accuracy and a very long lifetime. Compact braided square and rectangular copper flexibles are particularly suitable for applications in carbon brushes industry, connection technology, switches and aviation industry.

Scope of application: -Horizontal and vertical installation – suitable for both vertical and horizontal CNC-controlled milling machines -Lateral installation is also possible Product features: -Extreme accuracy for your machining -The TC vice is ground and polished on all sides -Clamping force can be preset in 11 increments – fine gradations for delicate workpieces. At most, one revolution is required to reach the max. clamping force -Preselectable and reproducible clamping forces enable the workpiece position to be repeated within a tolerance of less than 0.01 mm

The precise machining system for high reproduction accuracy with optimal surface quality The precise shape processing system for high image accuracy with the best surface quality Suitability for high precision spatial shapes in the shortest time NCcontrolled precision vertical axis with integrated electromagnetic oscillation Granite machine construction Zeropoint clamping system as interface for the cathode holder Generator up to 10,000 A at 15 V DC with integrated pulse function Controller Beckhoff machine and process control Version as twostation system for manual or linked automatedoperation

precision slides with ball screws or trapezoidal screw drive. - Three sizes – 100, 155 and 225 - Cover variants – sheet or bellows cover - Traversing carriage available in two lengths - Various stepper and servo motors, controllers, special versions such as - Motor deflections via timing belt drive make the precision slides universal can be used and are optionally available with or without motor. - Integrated limit switches (inductive proximity switches) with cable entry or plug connection in the endplate. - Base plate and end plates are made of a surface-treated and high-strength aluminium alloy. - Modular use, e. g. as multi-axis systems