Petrochemical industry - Import export

100 % virgin PTFE, modified and filled with Barium sulfate Characteristics Protected against cold flow Excellent recovery Excellent chemical resistance in caustic applications Reduced leakage rates compared to other filled PTFE gaskets under the same gasket stress. Technical parameters pH 0 - 14 Temperature: t = -180 … +230 °C, short term up to 260 °C Pressure: p = 55 bar Article code / Thickness WHITE 08 / 0.8 mm WHITE 10 / 1.0 mm WHITE 15 / 1.5 mm WHITE 20 / 2.0 mm WHITE 30 / 3.0 mm Main application Steel-, Glass-, Ceramic-, glass lined or plastic flanges on pipework Vessel Container Reactors Suitable for Chemical and Petrochemical industry Approvals TA-Luft Form of delivery Gasket sheet size of 1,500 x 1,500 mm in thickness of 0.8/1.0/1.5/2.0/3.0 mm or cut gaskets according to drawing or EN and international Standards, special dimensions on request.

Modified PTFE reinforced with special silica filler Characteristics Protected against cold flow Excellent recovery Very good in applications with varying temperatures Reduced leakage rates compared to other filled PTFE gaskets under the same gasket stress. Technical parameters pH 0 - 14 Temperature: t = -180 … +230 °C, short term up to 260 °C Pressure: p = 55 bar Article code / Thickness FAWN 05 / 0.5 mm FAWN 10 / 1.0 mm FAWN 15 / 1.5 mm FAWN 20 / 2.0 mm FAWN 30 / 3.0 mm Main application Steel or other metal flanges on pipework Vessel Container Reactors in higher temperature applications. Suitable for Chemical and Petrochemical industry Approvals TA-Luft Form of delivery Gasket sheet size of 1,500 x 1,500 mm in thickness of 0.5 / 1.0 / 1.5 / 2.0 / 3.0 mm or cut gaskets according to drawing, or EN and international Standards, special dimensions on request.

Spiral wound gasket made of crimped metal tape with sealing wraps of non asbestos gasket material. Optional: inner and/or outer metal ring. Characteristics For flange connections in high pressure pipe line construction and fittings Extremely low leakage with PTFE spiral. Helium leakproof 10 - 8 mbar l/(ms) High temperature resistance to 550 °C with graphite spiral Media resistance: pH 0 - 14 Max. pressure load: p = 400 bar Temperature range: t = -200 to +550 °C Technical parameters pH 0 - 14 Temperature: t = -200 … +550 °C Pressure: p = 400 bar Main application High temperature and high pressure flanges Piping Pressure vessels Heat exchangers Fittings Suitable for Power plants Petrochemical plants Chemical industry Material Centerring ring OD: Carbon Steel galvanized Spiral: 316L Centerring ring ID: Carbon Steel galvanized Other material combinations on request Product Types SF 11 Spiral wound gasket without any center ring for flanges with tongue and groove connection SF...

High Temperature Gasket of Expanded Flexible Graphite with Stretchmetal Characteristics Expanded graphite sheet gasket with Stainless Steel stretch metal reinforcement and a purity of 99 %. Practically no cold flow or creep under temperature. Non hardening Excellent in use with cycling temperatures. Blow out safe due to 3 dimensional reinforcement matrixes Optimized transfer of sealing stress Safe use even with small sealing width Minimized risk of separation known from multilayer reinforced gasket sheets. Technical parameters pH 0 - 14 Temperature: t = -200 … +550 °C, n oxidizing atmosphere +450 °C Pressure: p = 200 bar Main application Universal use as problem solver in all industries when demanding higher operation safety and sealability especially in older plant equipment. Suitable for Chemical industry Petrochemical plants Pharmaceutical industry Power plant technology Paper industry Sugar industry Approvals DVGW BAM TA Luft FIRE SAFE API 607 on request Form of...

D 5 Prophit High Temperature Gasket of Expanded Flexible Graphite with and without reinforcements Characteristics Temperature range in inert environment up to +3000 °C (attention: reinforcement inserts cause temp limits) Permanent elasticity, resilience approx. 10 % Non ageing - does not contain binding compounds High pressure resistance Radiation resistance and excellent media resistance Main application Flanges Sight glasses Valve bonnets Pipe flanges Suitable for Chemical industry Petrochemical refineries and steam production Pharmaceutical industry Power plant technology Paper industry Sugar industry Form of delivery Sheets or custom die cut rings With inner or/and outer crimp: mat. 1.4571 0.15 mm thick, seamless pressed Other materials and designs on request.

Pre-compressed ring-set made of expanded graphite and reinforcement to protect against extrusion Characteristics Packingset made by combining two expanded Graphite grades and designs in order to avoid blow out and extrusion and as well enhance the sealability of this valve sealing set. The set was tested and approved by the AMTEC GmbH Lauffen in Germany. The leakage parameters of 8.6 x 10-3 mbar · l/(s·m) complies with the VDI 2440 at +400 °C, which specifies a maximum allowed leakage of 1.0 x 10 -2 mbar · l/(s·m) (test media helium) and is therefore recommended as a high grade seal system. Operating range Pressure without LiveLoading: p 40 [bar] Pressure with LiveLoading: p 160 [bar] Temperature without LiveLoading: t 400 °C Temperature with LiveLoading: t 400 °C pH: 0 - 14 Main application Valves Flaps Gate valves Fittings Suitable for Power plant technology Chemical industry Petrochemical plants Boiler houses Refineries Approvals TA Luft / VDI 2440 Certificate

Pre compressed Packing set of expanded graphite with Inconel Matrix reinforcement and special PTFE coating Characteristics Ring Set made from special high temperature resistant yarn and pore filling cross section impregnation fulfills with a tested leakage rate of 8.4 x 10 -3 mbar · l/(s·m) the leakage criteria of VDI 2440 +400 °C with a maximum allowable leckagerate of 1 x 10 -2 mbar l/(sm) and is suitable for temperatures up to +300 °C. Operating range Pressure without LiveLoading: p 40 [bar] Pressure with LiveLoading: p 100 [bar] Temperature without LiveLoading: t +300 °C Temperature with LiveLoading: t +300 °C pH: 0 - 14 Main application Valves Flaps Gate valves Fittings Control Valves Suitable for Power plant technology Chemical industry Petrochemical plants Boiler houses Approvals TA Luft / VDI 2440 Certificate ISO 15848-1 CC1 ISO 15848 test was conducted with 20,000 mechanical cycles and 2 thermal cycles (RT, +200 °C) and passed with a leckagerate of 6.1 x 10 -4 mg/s/m.

Pre-compressed Packing Set of specially impregnated PTFE fiber packing Characteristics Ring set made of pure PTFE packing and PTFE compound bull rings fulfills with a tested leakage rate of 4.2 x 10 -5 mbar · l/(s·m) the leakage criteria according to VDI 2440 +200 °C with a maximum allowable leakagerate of 1 x 10 -4 mbar l/(sm) and is suitable for temperatures up to +200 °C. Operating range Pressure without LiveLoading: p 40 [bar] Pressure with LiveLoading: p 100 [bar] Temperature without LiveLoading: t +200 °C Temperature with LiveLoading: t +200 °C pH: 0 - 14 Main application Valves Flaps Gate valves Fittings Suitable for Power plant technology Chemical industry Petrochemical plants Approvals TA Luft / VDI 2440 Certificate

Pre-compressed Packing set of specially impregnated PTFE fiber packing Characteristics Ring set made of pure PTFE packing fulfills with a tested leckage of 6.3  x 10 -6 mbar · l/(s·m) the leakage criteria according to VDI 2440 +200 °C with a maximum allowable leakagerate of 1 x 10 -4 mbar l/(sm) and is suitable for temperatures up to +200 °C. Operating range Pressure without LiveLoading: p 40 [bar] Pressure with LiveLoading: p 100 [bar] Temperature without LiveLoading: t +200 °C Temperature with LiveLoading: t +200 °C pH: 0 - 14 Main application Valves Flaps Gate valves Fittings Suitable for Chemical industry Petrochemical plants Approvals TA Luft / VDI 2440 Certificate EU 10/2011 / EG 1935:2004 FDA