Results for
WECKERLE MACHINES
Germany
Weckerle´s new Dry Powder Compacting Line complements the successful range of powder machines. The DPC assures dosing and pressing of various dry cosmetic powders, such as eye shadows and different kinds of face powders with an output up to 2,100 pcs/h. Through the integration of an automatic extraction system, a hygienic process is ensured. The servo-driven pressing station guarantees an easy adjustment of several parameters in correlation with your powder compound behavior to your specific requirements. Also an easy filling height adjustment is included. Each specific production set-up is available directly in the HMI. The user friendly designed machine is able to cater a wide range of formats and provides accurate pouring with perfect product surfaces. State of the art SMED designs enable product and format changes in just a few minutes.
Request for a quoteWECKERLE MACHINES
Germany
The UF is Weckerle’s ultimate high speed filling machine with large output production. This machine is able to run a wide range of products with different volumes and diameters, such as chap sticks, make-up sticks, deodorant sticks/ tubes and various other products. The straightforward machine handling provides a highly efficient operation.
Request for a quoteWECKERLE MACHINES
Germany
Weckerle’s WP facilitates pouring and pressing of various wet cosmetic powders, such as eye shadows, blushes, and different kinds of face powder. Through the back injection technology and the direct filling into the packaging, the WP assures a maximum efficiency and saves further processing steps. WP Output: up to 3600 pcs/h Linear filling process
Request for a quoteWECKERLE MACHINES
Germany
The MPL ensures dry powder pressing for different cosmetic powders, such as eye shadows and different kinds of face powder. This machine is able to cater a wide range of formats and packaging with high output and accuracy. The setup allows pouring up to 8 different colors into a single pan in only one dosing step.
Request for a quoteWECKERLE MACHINES
Germany
Weckerle’s MM machine series, enables you to fill lipsticks and/or lip balms with different moulds in various shapes, diameters, and output. With these machines, Weckerle assures the ultimate perfection in the lipstick filling process. MultiMould Lipstick Filling and Processing Line MM 60: The fully servo-driven machine features 60 interchangeable moulds to customer’s specification for filling various hot poured cosmetic sticks such as lipstick, slim stick, lip balms, and make-up sticks. MM 180: The fully servo-driven MM 180 features 180 interchangeable moulds to customer´s specification for filling various hot poured cosmetic sticks such as lipstick, slim stick, lip balms, and make-up sticks. MM 360: The fully servo-driven MM 360 features 360 interchangeable moulds to customer´s specification for filling various hot poured cosmetic sticks such as lipstick, slim stick, lip balms, and make
Request for a quoteSPIROL
Germany
SPIROL's Model DP self-contained vertical drilling and pinning machine is ideally suited for moderate to high production applications that require accurate drilling and pinning of assemblies. The concept of drilling and pinning with one system eliminates tight tolerance and precision drilling of individual components to ensure proper alignment of holes for assembly. The Model DP Drilling and Pinning Machine consists of an automatic high-precision drilling unit, a SPIROL Model CR Heavy Duty Pin Insertion Machine and a precision air-powered linear slide unit to move the assembly between the drill unit and installation station. The Model DP Drilling and Pinning Machine can drill holes ranging in diameter from 0.8mm-6mm (.031”-.250”) and is capable of insertion forces up to 8 kN (1,800 lbs).
Request for a quoteRUF MASCHINENBAU GMBH & CO. KG
Germany
The latest addition to the RUF Maschinenbau portfolio, the low-cost RUF Formica, is a new briquetting system designed for the metals industries. Configured for small to mid sized batches in a wide range of applications, it frees a lot of storage space and simplifies logistics, making it in addition an attractive investment for production companies generating only small chip quantities.
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
Metzner has been developing and designing production machinery for tube machining for nearly three decades. Thanks to these many years of experience, today we can offer solutions that are adapted to the variety of different tube diameters and material properties. Wherever tubes have to be cut in very large quantities, impact knife machines are used. The Metzner Dynamat series achieves up to 4000 cuts per minute with one knife and, if required, an even higher cutting performance with multiple knives. Customers have the choice between "stop & go" cut or continuous cut. There are different machine sizes for materials of up to 120 mm diameter, which are prepared as standard for a wide range of peripheral equipment and knife moistening. The Dynamat machines process elastic materials reliably and with repetitive accuracy – from silicone tubes for the medical sector to fabric-reinforced tubes and profiles. No difference whether the material comes from an extruder or is unwound from a coil.
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
Metzner provides a number of proven automation solutions for the automatic loading and unloading of coating carriers for CVD and PVD coatings. The abbreviations PVD (Physical Vapour Deposition) and CVD (Chemical Vapour Deposition) stand for different coating processes. When loading the PVD spears, we differentiate between "single-loading" and "back-to-back loading". In addition to part loading, spacers are loaded onto the spears in addition to the parts. In single-loading, a spacer is located behind each individual insert, whereas in back-to-back-loading, two inserts are placed "back to back" and only then is a spacer loaded. To implement "back-to-back-loading", a turning station is integrated into the machinery. This station is used to turn the corresponding insert by 180 degrees, loading it directly onto the respective spear.
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
Metzner has developed a fully automatic processing machine with outstanding cutting quality and great length accuracy for steel cable wires of up to 20 mm diameter. The steel cable wires are fed by a motorised feeding device in combination with a contact-free loop control. Then, program-controlled and positionally accurate marking tapes are applied to the steel cable – with a cycle time of less than two seconds. In addition, a wax printer marks all the fastening and processing points that will be required for subsequent processing. This labelling method is carried out in a continuous process. The cut is then made using a special cutting process. Precise length accuracy is achieved by a special laser measuring system. A material stacker with a storage area of up to 12 metres ensures that the steel cable wires are deposited in an orderly manner. All cut steel rope can be stored and sorted according to length to allow it to be removed at a later point.
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
This special Metzner development is able to process cable wires with a diameter of up to 28 mm. The cycle time for this is 2000 mm / 35 seconds. The processing steps include long slitting, sawing, circumferential cutting, stripping, brushing and depositing. An integrated ink jet printer labels the cable wires with information or markings. As the heart of the processing method, Metzner uses a newly developed stripping head that combines a rotary cut with a powerful clamping and simultaneous rotation of the material. This enables a high-precision, multi-stage radial cut through the various layers of material. Microscopic quality inspection confirms that the processing is flawless with no scratches, pressure or abrasion marks. In addition to the high machining quality, the machinery also offers special precision: both the overall length and the machining position are maintained with an accuracy of 0.2 mm. The machine can process cable wires with diameters up to 28 mm.
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
The specially developed production line can unwind, label, roughen, cut to length, strip, wind, bind and automatically deposit the cable wires. The material to be processed is unwound by a motorised unwinder and fed to a thermal transfer printer via a straightener. The latter prints the cable with two QR codes and a serial number. This ensures that each cable can be identified throughout the entire processing and manufacturing process and assigned to the stations which have already passed through. This traceability offers great advantages – for example in the diagnosis of faults. The cable then passes through a roughening station, which lightly roughens the material surface so that the connector overmoulding adheres better later on. An AM 3550 from Metzner Maschinenbau cuts to length and strips the cable, which is then transported to the winding station and onwards by a gripper to the binding machine. The latter winds the cable to form a cable ring.
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
Plastic-coated steel cablestrands are cut to length using a special shear cut module and then stripped with the cutting module of the AM3500 without the wires "jumping open".Bare steel cable wires are transported by the modified AM 3500 directly to the special cutting machine, which is coupled between the AM 3500 and the material stacker and which cuts the material to length by a thermal process. Due to the special electric welding process used here, the individual wires do not twist up during cutting, and a smooth rope start and a smooth rope end without thickening are produced. Long steel cable wires/strands are placed in a tray after processing, while short pieces of material fall down a chute into a collecting container. With the high-performance solution developed by Metzner, the customer can process different types of material in different processes. Further advantages of the machinery are high precision, high quality, an increase in productivity and lower personnel costs.
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
The Metzner special development department produces endotracheal tubes with high precision and cleanliness. This is ensured, among other things, by processes such as automatic loading, alignment and positioning of the tubes, processing by seven consecutive work stations and automatic quality control by sensors. Our product video will give you an insight into the machining process. Maschinenbau GmbH has sustainably reduced the production costs of the end products and created additional production capacities with a fully automatic production system for endotracheal tubes.
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
The special Metzner development is a fully automatic machinery consisting of a contact-free loop control, an automatic cutting machine and a crushing station with storage system. It can produce polystyrene pipettes with diameters from 4 to 25 mm and lengths from 100 to 700 mm. The extruded material is first scored with the aid of several rotary cutting heads, then broken and finally deposited in collecting containers. The cycle time for four parts is only 1.5 seconds. For the production of short lengths (up to 120 mm), the cycle time is extended to approximately three seconds.
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
An internationally active medical technology company that produces and sells catheter tubes, among other things, has optimized its manufacturing process with the help of a production line from Metzner Maschinenbau. With Metzner's know-how, it was possible to replace a costly manual process with an automatic machine, saving costs. At the same time, the length accuracy and the cutting quality were significantly improved. The company supplied a fully automatic system that precisely cuts the catheter tubing to length, removes the mandrel present from the extrusion without leaving any residue and without longitudinal expansion, and then deposits the tubing in a collecting container at the end. Processing with exact length accuracy and mandrel removal The Metzner special development cuts catheter tubes to an exact length and removes the mandrel inside safely and precisely. The finished material is deposited in a collection container.
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
Metzner has developed the mandrel cutting machines of the SR series for cutting off sealing rings from injection-moulded or extruded tubes with different diameters. These machines are characterised by their unique processing method and high cutting quality. First, pre-extended "rubber tubes" are clamped onto mandrels. Due to the special design of the mandrels, the mandrel can be set up and removed quickly and without special previous knowledge. The mandrels are then automatically clamped in the machine between rotating spindles and production is started. A knife carriage travels along the tubes and cuts the flat sealing rings to the desired length with either push-fit or circular knives, depending on the requirements. This cutting method is particularly impressive with its high cutting quality in combination with a high output.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
METZNER MASCHINENBAU GMBH
Germany
The modular system of the MBS series is available in three sizes. The MBS 400 is the “largest" of the three models and processes materials such as tubes and profiles of up to 390 mm wide. Depending on the material size, further machine elements such as type and number of cutting tools, length and width of the belt feed, control, feed, running direction, coating material of the conveyor belts and base frames are selected. Metzner "MBS series" cutting machines stand for outstanding flexibility when machining flexible and semi-rigid profiles made of rubber and plastic. With different cutting methods and machine components, cutting machines are created which can be individually adapted to customer requirements and are made available in the shortest possible time with hardly any development effort.
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
The modular system of the MBS series is available in three sizes. The MBS 200 is the "medium-sized" of the three models and processes materials such as tubes and profiles up to 190 mm wide. Depending on the material size, further machine elements such as type and number of cutting tools, length and width of the belt feed, control, feed, running direction, coating material of the conveyor belts and base frames are selected. Metzner "MBS series" cutting machines stand for outstanding flexibility when machining flexible and semi-rigid profiles made of rubber and plastic. With different cutting methods and machine components, cutting machines are created which can be individually adapted to customer requirements and are made available in the shortest possible time with hardly any development effort.
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
The modular system of the MBS series is available in three sizes. The MBS 100 is the "smallest" of the three models and processes materials such as tubes and profiles of up to 90 mm wide. Depending on the material size, further machine elements such as type and number of cutting tools, length and width of the belt feed, control, feed, running direction, coating material of the conveyor belts and base frames are selected. Metzner "MBS series" cutting machines stand for outstanding flexibility when machining flexible and semi-rigid profiles made of rubber and plastic. With different cutting methods and machine components, cutting machines are created which can be individually adapted to customer requirements and are made available in the shortest possible time with hardly any development effort.
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
The travelling circular knife machine CCM 6 cuts rigid profiles and tubes accurately to length. The CCM 6 achieves very long processing times of several seconds for excellent "final trim quality" thanks to a standard servo linear drive for the tool carrier, and at the same time extremely short cycle times of less than one second for machining short parts at high line speeds. Added to this is the servo linear drive for circular knife feed with different feed speeds for different material sections, e.g. a gentle material penetration or knife exit with low feed to reduce burr formation. High speed ranges As far as the knife speed is concerned, we offer you outstanding possibilities of alternatively 2,000 – 6,000 rpm or 4,000 – 12,000 rpm. This means that there are no limits to the use of various types of circular knives, including clamping and grinding in continuous operation. Our product videos will give you an insight into the machining process.
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
The special feature of the Metzner CCM 4: the circular cutting machine handles both wet and dry cutting. Depending on the type of cut, the CCM 4 is equipped with a water-cooling lubrication system or micro-knife moistening and preparation for suction. The standard model comes with an integrated discharge conveyor (800 mm length); application range both in-line and off-line. For tubes with suitable material properties the CCM 4 Gasket offers the possibility to cut flat gaskets with the circular knife. Suitable for tubes with max. 30 or 50 mm diameter and a tube length of 1 mm to 1000 m.
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
The Metzner CCM 2 circular cutting machine processes steel-reinforced profiles and sponge rubber materials with dry cutting (optionally with micro-knife moistening to cool the circular knife). The standard model comes with an integrated discharge conveyor (1300 mm length); range of application both in-line and off-line.
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
With automatic continuous punching machines, machine and tool merge into a high-performance system with high output and remarkable flexibility. Whether sealing profiles for the automotive industry, applications for furniture, or household appliances – complex trimming is often required here. Thanks to the Metzner automatic throughfeed punching machines, processing operations such as contour cutting, drilling and milling can be integrated into a throughfeed system. All these machines store all machining parameters and machine settings in a machining recipe. When starting production, an integrated barcode scanner activates all presettings on the basis of the working papers and simultaneously reports the correct tool and material on the machine display. The barcode also contains the required quantities and lengths. Thanks to well thought-out quick-change systems, tools and materials are generally changed within no more than 30 seconds, minimizing downtimes.
Request for a quoteFATH GMBH
Germany
To mount leveling feet, rollers, hooks or similar components; connects to the profile sideways Various shapes and designs on request Material: Die-cast aluminum, Aluminium die-cast Surface: Plain, black powder coated Specials: Other surfaces, other colors on request
Request for a quoteALLMATIC-JAKOB SPANNSYSTEME GMBH
Germany
Scope of application: -Horizontal installation – suitable for vertical CNC-controlled milling machines -Ideal for use on 5-axis machining centres -Reliable and fast clamping of unmachined parts, flame-cut and sawn materials with gripper jaws -Clamping of parallel pre-machined workpieces with optional step jaws -Gripper studs suitable for materials with a strength of up to approx. 1000N/mm² Product features: -Optimum accessibility for 5-sided machining thanks to the combination of compact base and large clamping width -Stamping and clamping in a single process, in the working area itself, without any additional accessories -The movable/pivot support jaw allows different workpiece contours to be clamped -Gripper studs can be changed without tools and are easy to adjust by hand -Operation with a torque wrench – max. 30 Nm -High-pressure spindle with power intensification
Request for a quoteALLMATIC-JAKOB SPANNSYSTEME GMBH
Germany
Scope of application: -Suitable for heavy machining work, single pieces and small batches -Designed particularly for use on conventional milling machines Product features: -Clamping force preselection, 2 to 4 increments, allows accurate repetition (type 100 – 2 increments; types 125, 160 – 4 increments) -Our tried and tested HD vice enables problem-free working with high clamping force and long-term reliability -Particularly suitable for single-piece production if you wish to make your vice rotatable -Can be removed at any time -Swivel base supporting edge larger than the vice‘s maximum clamping range -Swivels 360° without indexing -Alignment on the machine with T-keys in slots in the swivel base -Clamping slots arranged in the form of a ring for machines with different slot spacings
Request for a quoteALLMATIC-JAKOB SPANNSYSTEME GMBH
Germany
Scope of application: -For horizontal & vertical usage-suitable for CNC controlled milling machines & large machining centres -Clamping unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the workpiece -With the support jaws, unmachined parts in highly varied materials, or with complex geometries, can be clamped securely -Gripper studs suitable for materials with a strength of up toapprox. 1000N/mm² Product features: -High versatility – the modular clamping system combines practically all the possibilities of our tried-and-tested models -Fully compatible with the accessories of the LC/TC 160 series, for example gripper studs, universal gripper set & pull down sets -Grounded sides so that all sides can be used High-pressure spindle with mech. force amplifier for the safe clamping of raw parts in combination with gripping & pull down spring function -Lost clamping margin 8 mm with pull-down, 3 mm with GRIPPER
Request for a quoteALLMATIC-JAKOB SPANNSYSTEME GMBH
Germany
Scope of application: -The classical, universal clamp, for vertical 3 axis machining centres -Conventional clamping and gripp clamping possible -Clamping of raw parts, burn and saw cuts by penetrating hardened and interchangeable gripp elements into the workpiece Customer advantages: -Free of charge introduction to gripp technology in comparison to conventional clamping (LC) -First and second clamping stations without retrofitting the step jaws Clamping of raw parts such as burn & saw cuts (materials up to approx. 1000N/mm2) through screwable clamping applications (first clamping station) -Parallel clamping to machined workpieces with the step jaws (2. clamping station) Product features: -The high-pressure spindle allows you to, with a mechanical force amplifier (using the torque wrench), to work and clamp to a table -Stable GGG60 body, grounded top and bottom -Precise tracks in the grounded surface of the soles for optimum alignment on the machining table
Request for a quoteResults for
Dem machines - Import exportNumber of results
111 ProductsCompany type
Category