Results for
LEONI DRAHT GMBH
Germany
Semi-concentric or concentric strands with very short lay lengths and an extraordinarily smooth surface made from Cu-ETP1 and Cu-OF1 in bare, tin-plated, nickel-plated or silver-plated, soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.02 mm² to 16 mm². LEONI has had its manufacturing process specifically dedicated to this type of product patented. LEONI smooth bunches boast an exceptionally compact and precise round structure and have a very good Flex life. They are particularly suitable for moving applications and for thin-gauge coating with high-grade isolation materials benefitting from a long flex life as well as weight and space efficiency.
Request for a quoteLEONI DRAHT GMBH
Germany
Compacted material terminals made from Cu-ETP1 and Cu-OF1, in bare and tin-plated, nickel-plated and silver-plated upon request, in hard or soft annealed. Cross-section ranging from 1 mm² to 95 mm² depending on welding area. Compact welded terminals of different copper strands can be automated processed. A production of individual parts is possible as well as large-scale production. Resistance welded strands by LEONI are particularly suitable for high-voltage battery connectors, for high power connectors, for switch contacts and for special applications.
Request for a quoteQUELLTECH GMBH
Germany
The new QuellTech Q5 Laser Scanner Series combines the advantages of small form factors with both high resolution and scan rate. The sensor disposes of different set-up possibilities with respect to the analysis algorithm. Measurement results are delivered via Ethernet, calibrated in the X / Z plane. Special adjustable algorithms can be selected, extremely useful particularly also for optically most demanding surfaces. Time-consuming calibration tasks for the user are no more required, as the calibration routine runs on board. High Scan Rate with up to 14,000 Profiles per Second Due to an appropriate limitation of the image range (AOI) in X and Z direction, the scan rate could considerably be increased. High resolution and detection frequency with up to 14.000 profiles and 28 Mio. points per second •X measuring range from 10 to 1022 mm •Z measuring range (height) from 5 to 878 mm •Laser wave length blue 405/450nm, red 650nm
Request for a quoteSMART BATTERY SOLUTIONS GMBH
Germany
The UniPower light is the small, powerful and universal Lithium battery pack by SBS. Through our modular design you can configure voltage and capacity to fit your application.
Request for a quoteSCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
Compact valve manifolds with low piping effort, reduced maintenance time and minimize investment costs. A connection system well known from the field of hydraulics and adapted to the respective application, allows for the intelligent combination of several valves in a customerspecific manifold. All necessary connections between the individual process valves are integrated in the manifold.
Request for a quoteMICRO-EPSILON
Germany
The thicknessGAUGE O.IMS is used for stable thickness measurement of coating on separator film. The system is designed as a compact O-frame and uses a white light interferometer that traverses over the battery film. Thanks to the innovative technology, the thickness measurement is contactless from only one side. Two transport rollers stabilize the film belt.
Request for a quoteMICRO-EPSILON
Germany
thicknessGAUGE sensor systems are used to measure the thickness of strip materials in-line. Several models with different sensor types, measuring ranges and measuring widths enable inline thickness measurements of different materials and surfaces. The systems uses two confocal distance sensors which detect the strip thickness with high precision. The sensors are precisely aligned to each other and factory-calibrated. By means of a linear axis, the thicknessGAUGE sensor systems can be moved to measure the thickness across the entire strip width. Their extremely compact design enables integration into confined spaces.
Request for a quoteIREMA-FILTER GMBH
Germany
Our synthetic 3Vcell excels in its technical performance and is tested according to various standards (EN779, ISO16890, Ahsrae 52.2). The Vcells are widely used in air conditioning and ventilation industry and process filtration thus an excellent choice for tough applications. IREMA 3Vcells feature a highly improved filter lifetime and energy efficiency.
Request for a quoteAPROVIS
Germany
What you can expect from APROVIS silencers: - Standard versions for selected engines - Individual design and construction for every application - Assured sound reduction even with high requirements - Cost- and installation space-optimised design that makes use of the pressure drop
Request for a quoteBDSENSORS GMBH
Germany
The DMD 331 is a differential pressure transmitter for industrial applications and is based on a piezoresistive stainless steel sensor, which can be pressurized on both sides with fluids or gases compatible with SST 1.4404 and 1.4435. The compact design allows an integration of the DMD 331 in machines and applications with limited space. The DMD 331 calculates the difference between the pressure on the positive and the negative side and converts it into a proportional electrical signal. Features: — differential pressure 0 ... 20 mbar up to 0 ... 16 bar — accuracy: 0.5 % FSO — 2 piezoresistive stainless steel sensors — differential pressure wet / wet — permissible static pressure -one sided- up to 30 times of differential pressure range — compact design — mechanical robust and relieable at dynamic pressures as well as shock and vibration
Request for a quoteBDSENSORS GMBH
Germany
The compact low-cost digital pressure gauge DM 10 is battery-powered and has an adjustable housing; it is thus extremely suitable for mobile pressure monitoring. The 4.5-digit LC-display indicates the battery status, the mea-surement value as well as the unit, this enables a fast and precise reading. It is possible to switch between the most common units (bar, psi, Pa, MPa). Additional functions as auto-zero, min / max values and an automatic switching-off complete the DM 10 profile. Features: — nominal pressure: 0 ... 1.6 bar up to 0 ... 250 bar — accuracy: 0.5 % FSO BFSL (class 0.5) — ceramic diaphragm — adjustable housing — LC display, 4.5-digit 7-segment display — standard battery CR 2450 operating period > 1.800h Optional Features: — min / max function with reset function — auto-zero — setting the pressure unit — automatic switch-off cofiguration
Request for a quoteBDSENSORS GMBH
Germany
Features: — nominal pressure: 0 ... 1 bar up to 0 ... 10 bar, -1 bar ... 0 bar — compact design — 1 or 2 contacts — configurable via PC or programming device P6 — silicon sensor, RTV — accuracy: 1 % FSO
Request for a quoteBOSCH INDUSTRIEKESSEL GMBH - INDUSTRIAL BOILERS
Germany
— Modular complete solution with cost advantage, for all single-flame-tube hot water and heating boilers — Intelligent sequence control for up to four boilers — Intuitive operation via colour touch display and function keys for quick access — Pre-configured and completely wired for quick commissioning — Integrated power supply in the compact control cabinet, e.g. for burner and pumps — Compatible with all common automation system protocols — Optional remote access via MEC Remote for maximum availability
Request for a quoteBDSENSORS GMBH
Germany
The screw-in transmitter LMP 331 has been designed for continuous level measurement and is characterized by an excellent performance and a robust construction. The modular construction allows the user the highest possible flexibility in the adaption of LMP 331. Optional features like e.g. an intrinsically safe version or a functionally safe version (SIL 2) increase the advantages when launching and realizing projects for plants and systems. Features — nominal pressure: 0 ... 100 mbar up to 0 ... 40 bar — accuracy: 0.35 % (opt. 0.25% / 0.1 %) FSO — small thermal effect — excellent long term stability — pressure port G 3/4" flush Optional Features — IS-version Ex ia = intrinsically safe for gases and dusts — SIL 2 application according to IEC 61508 / IEC 61511 — different electrical connections — customer specific versions e.g. special pressure ranges
Request for a quoteBDSENSORS GMBH
Germany
The stainless steel probe LMP 307 is designed for continuous level measurement in water and clean or waste fluids. Basic element is a high quality stainless steel sensor with high requirements for exact measurement with excellent long term stability. Features: — nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O — accuracy: 0,35 % (opt. 0,25% / 0,1 %) FSO — diameter 26,5 mm — small thermal effect — excellent long term stability — high accuracy Optional Features: — IS-version Ex ia = intrinsically safe for gas and dust — SIL 2 (safety integrity level) — drinking water certificate acc. to DVGW and KTW — different kinds of cables and elastomers — petrol version, welded pressure sensor and housing — mounting with stainless steel pipe
Request for a quoteBOSCH INDUSTRIEKESSEL GMBH - INDUSTRIAL BOILERS
Germany
— For the convenient operation of steam boilers up to 4,000 kg/h of steam — Appealing price-performance ratio for steam boilers up to 4,000 kg/h of steam — Colour touch display for easy operation and clear visualisation of operating status — Flexible installation and small space requirement: installed on the boiler at the factory or loose control cabinet for wall mounting — Power electronics for fuel supply, feed water pump, blow-down and desalting — Optional: fully automated and conductivity-controlled blow-down and desalting
Request for a quoteBDSENSORS GMBH
Germany
The screw-in transmitter LMK 351 has been designed for measuring small system pressure and level measurement in container. The LMK 351 is based on an own-developed capacitive ceramic sensor element. Usage in viscous and pasty media is possible because of the flush mounted sensor. For the usage in aggressive media a pressure port in PVDF and the diaphragm in AI2O3 99.9 % is available. An intrinsically safe version complete the range of possibilities. Features — nominal pressure: 0 ... 40 mbar up to 0 ... 20 bar — accuracy: 0.35 % (opt. 0.25 %) FSO — pressure port G 1 1/2" for pasty and polluted media Optional Features — IS-version Ex ia = intrinsically for gases and dusts — pressure port PVDF for aggressive media — diaphragm pure ceramic (99,9 % Al2O3) — customer specific versions
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
TOPTICA PHOTONICS AG
Germany
CoSy generates both purely Doppler-free and purely Doppler-broadened absorption saturation spectra, which can be fed directly to appropriate stabilization electronics. CoSy can conveniently be used for top-of-fringe stabilization with a modulation technique (bandwidth 50 kHz .. 1 MHz). The CoSy module helps the customer save time and space in his experiment. The absorption cell of the Cosy is filled with Rb, Cs and K and serves as a frequency reference for Rb, Cs and K frequencies from a single device.
Request for a quoteTOPTICA PHOTONICS AG
Germany
TOPTICA's iChrome CLE is a compact laser engine that combines four laser lines in one box. All integrated colors are provided via one polarization-maintaining single-mode fiber. It is available with 405, 488, 561 and 640 nm and more than 20 mW guaranteed output power after the fiber each. The system guarantees a plug & play installation since it includes TOPTICA's proprietary COOLAC automatic alignment technology.
Request for a quoteTOPTICA PHOTONICS AG
Germany
TOPTICA’s frequency comb product line uses our proprietary CERO-technology which is based on Difference Frequency Generation (DFG). It is inherently fCEO-stable and combines high robustness, high-end performance and a convenient user-interface in a compact format. Frequency combs are used to measure absolute optical frequencies and to stabilize cw-lasers to specific frequencies, for example in order to drive transitions in cold atomic samples. Stabilization of Tunable Diode Lasers to a frequency comb is a reliable way forward to deal with the rising complexity of optical quantum technology applications.
Request for a quoteTOPTICA PHOTONICS AG
Germany
Pulsed terahertz generation with leading-edge technology: InGaAs antennas provide about 30 µW power and a bandwidth of 6 THz. The emitter and detector modules, developed by Fraunhofer Heinrich-Hertz Institute (Berlin/Germany), feature a strip-line and a dipole antenna, respectively, and are packaged with a Silicon lens and SM/PM fiber. They make up the core component of TOPTICA’s TeraFlash pro and TeraFlash smart, but are available as individual modules too.
Request for a quoteTOPTICA PHOTONICS AG
Germany
The FemtoFiber smart family is TOPTICA’s new series of ultrafast fiber lasers available as picosecond or femtosecond versions, based either on Ytterbium-doped or Erbium-doped fiber laser architecture. These systems are dedicated to applications ranging from seed laser purposes, biophotonics to terahertz generation and two-photon polymerization. Optimized for a compact footprint uniting optics and electronics in one box, these robust all-fiber lasers are the perfect choice for flexible OEM integration.
Request for a quoteKNAUER ENGINEERING GMBH INDUSTRIEANLAGEN & CO. KG
Germany
To view and download the brochure please click on the left image. This egglayer / block making machine is solid and productive. The COMPACT is suitable for the production of block elements up to a height off 330 mm. The stable, torsion-proof frame and the solid processing also enabel production under extreme climatic conditions. Control system Reliable control unit (Picture: semi-automatic version) for the precise control of the motion. Programming is possible according to desires of the client without programming unit. Inductive limit switches Contactless, space saving and wear resistant limit switches guarantee a secure and precise switching function. Control panel The control panel is easy to operate and was specially designed for the environment of concrete plants. Hydraulic Reliable, state of the art HAWE-hydraulic unit (picture: semi-automatic version). Security standrad High security standards in regards to working reliability and accident prevention. Frequency...
Request for a quotePERO AG
Germany
The compact KDA tunnel units cater for high throughput rates combined with excellent cleaning and drying. They have been designed for the treatment of parts of many different geometries and sizes. The KDA is available with belts of various widths (200/500/650 mm) and a range of features and accessories to cater for many different cleaning tasks. The KDA is available as 1, 2 and 3bath unit. Cleaning with aqueous media (acidic, neutral or alkaline) Spray cleaning unit for wide range of parts High throughput rate Compact, durable design Available as 1, 2 and 3bath unit with loading of the unit via Robot loading Manualm loading Construction side conveyor technology
Request for a quotePERO AG
Germany
The modular, preassembled PERO S1 units are available at short notice for your specific application The compact S1 degreases and cleans components made from various materials and of many different geometries and degrees of machining. The S1 is designed for dirt and grease removal at low energy and resource consumption. It therfore is the ideal entrylevel unit for cleaning with solvents in a closed system. The integrated distilling unit ensures process safety and efficient cleaning at a consistently high level. Cleaning with hydrocarbons or modified alcohols with a flash point > 55°C; other solvents on request 530 x 320 x 200 mm or 530 x 365 x 250 mm Entrylevel mpdel for cleaning with solvent in closed system Configurable for short cycle times Vapour degreasing in 1st process step Available as 1bath unit with loading of the unit via Manual charging unit Automatic charging unit
Request for a quotePERO AG
Germany
The R0 has been specifically designed for intermediate and final cleaning of small and extra small parts. Thanks to its universal process technology, the R0 offers operators unrivalled cleaning performance in an extra compact machine. The R0 can be transported through door clearances of as little as 1,000 x 2,000 mm. Depending on the model, the cleaning unit can be loaded from the long or from the short side. Cleaning with hydrocarbons or modified alcohols with a flash point > 55°C; halogenated hydrocarbons; other solvents on request Available as UNIVERSAL unit Top quality cleaning in compact unit Short cycle times High throughput Available as 1 and 2bath unit with loading of the unit via Manual charging unit Automatic charging unit
Request for a quoteNORIS GROUP GMBH
Germany
Predictive maintenance needs measured data to the greatest possible precision. On components with moving or rotating parts, the relevant measuring points (e. g. temperature of an electric motor’s rotor or planetary gearbox bearing) sometimes cannot be accessed with wired sensors. Accordingly, the data needed for condition monitoring can be obtained only with complex calculations and estimates. However, precise and reliable measured data are obtained only when a sensor is placed directly on the moving part. For requirements of this kind we have developed NORIFID, a simple, cost effective measuring system that is based on established technologies, supplies wirelessly power by induction to a sensor on a moving part, and transmits the measured data via RFID to a fixed receiver.
Request for a quote(STW) SENSOR-TECHNIK WIEDEMANN GMBH
Germany
The ESX-IOXp is a small, compact and freely-programmable control unit from the 16-bit control unit family. Due to its compact construction, it mainly facilitates the automation of small machines and attachment devices. The control unit can be used optionally with four LS outputs for the realization of motor bridges and with four PVG outputs. It features an XC2287 processor with 80 MHz by Infineon and 768-kB Flash, 1-MB-RAM- and 8-kB EEPROM memory. Software The application software for the ESX-IOXp can be created highly efficiently either in "C" or in CODESYS V2.3 IEC61131. In the programming interface, numerous convenient functions such as current controllers and ramp functions for outputs or frequency averaging for inputs are integrated.
Request for a quote(STW) SENSOR-TECHNIK WIEDEMANN GMBH
Germany
The ESX-3CM is a compact, robust and efficient control unit. In addition to the ESX-3CS, an ESX-3CM (C = Compact, M=Medium) rounds off the third generation of ESX control units. The “C” stands for “Compact” and indicates that all pins are fixed assigned prior to the hardware definition. The functions of these pins can be defined in more detail using software. Both control units are also suitable for safety-oriented applications up to Performance Level PL d or Safety Integrity Level SIL 2, and are based on a common architectural concept: The robust aluminum die cast housing with automotive plug-in connectors contains a fast 32-bit microcontroller with four MB Flash and eight MB SRAM, up to four CAN interfaces, one serial interface and several LEDs.
Request for a quoteResults for
Compact - Import exportNumber of results
40 ProductsCompany type
Category