Results for
IFA TECHNOLOGY GMBH
Germany
Liquids (for instance raw materials or end products) are stored in canisters, drums, IBC containers or storage tanks. Solids and bulk materials, on the other hand, are stored in bags, big bags, silos or various special containers. IFA Technology offers sound and safe handling for the storage of liquids, solids and bulk materials as well as suitable storage containers such as customised shelves, tank farms or silo systems. We check and control among other things the compatibility of the substances, the effect of environmental influences as well as the conformity with legal requirements. We ensure compliance with various regulations such as the German Water Resources Act (WHG) or Explosive Atmospheres Directive (ATEX) by means of temperature-controlled storage tanks and the blanketing of the relevant substances by means of nitrogen, dry air or gas displacement systems or their circulation via agitators or circulation.
Request for a quoteLINDNER SPRÜHSYSTEME GMBH
Germany
dispenser pump, easy handling, ergonomic design
Request for a quoteSCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
The sliding gate manual valve type 8050 in reinforced design and long construction is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be shut off safely with low actuating force and can be controlled excellently.
Request for a quoteLINDNER SPRÜHSYSTEME GMBH
Germany
main use: lotions, hair cosmetics, liquid soaps etc
Request for a quoteLINDNER SPRÜHSYSTEME GMBH
Germany
main use: lotions, hair cosmetics, liquid soaps etc.
Request for a quoteLINDNER SPRÜHSYSTEME GMBH
Germany
main use: lotions, hair cosmetics, liquid soaps etc.
Request for a quoteLINDNER SPRÜHSYSTEME GMBH
Germany
main use: lotions, hair cosmetics, liquid soaps, edible oil, sauces etc
Request for a quoteIFA TECHNOLOGY GMBH
Germany
In order to meet your requirements when mixing liquid and solid substances, our plants and systems enable the mixing of combinations in virtually any state of aggregation. IFA Technology is your competent partner for the right process - no matter if you want to mix liquids with liquids, solids with solids or liquids with solids or gases. We develop a wide range of applications for the production of the respective product - whether homogeneous or heterogeneous mixtures, suspensions, temporary liquid-liquid dispersions, emulsions using lipophilic and hydrophilic liquids or the mixing of bulk materials such as powders, granulates or flakes.
Request for a quoteIFA TECHNOLOGY GMBH
Germany
The weighing of liquids and solids is always implemented by IFA Technology according to your requirements - with load cells and evaluation devices from all the well-known suppliers. Liquid and solid substances can be weighed in their own storage containers, such as drums, containers, silos or tanks, but also in mixing tanks, storage containers or other containers. High-precision weight measurement makes it possible to weigh the components within the desired tolerances directly in the container or to measure them by loss-in-weight, and as a result achieve gravimetric dosing. As an alternative to gravimetric dosing, we use volumetric dosing of solids or liquids, depending on the requirements of the substances and processes. For volumetric dosing, we use the methods customary on the market, such as Coriolis mass flow measurement, magnetic-inductive flow measurement, ultrasonic measurement and counter measurement as well as belt scale measurement or impact scale measurement.
Request for a quoteIFA TECHNOLOGY GMBH
Germany
At IFA Technology we use all types of pumps available on the market for conveying liquids. We consider all necessary requirements for the safe and reliable conveyance of your products. Solids can be conveyed mechanically, pneumatically and hydraulically. For mechanical conveying, screws, conveyor belts, elevators, vibratory troughs or tube chain conveyors are used. Pneumatic conveying is mainly applied in the chemical and pharmaceutical industries as well as for conveying granulates in plastics processing and the food industry. The pneumatic conveyance process is carried out by suction and compressed air, i.e. by vacuum or positive pressure, and is mainly used when sensitive substances are transported. Heavy substances such as cement, sand or gravel are mainly transported by positive pressure.
Request for a quoteDEBANG EXPORT & IMPORT GMBH
Germany
Unleash the magic of pristine, spotless laundry with Ariel Liquid, the game-changer that transforms your washing experience. Specially crafted with cutting-edge technology and years of expertise, this 2.6L marvel is here to revolutionize the way you do laundry. Dive into a world of unparalleled freshness as Ariel Liquid effortlessly tackles even the toughest stains, leaving your clothes with a brilliant, irresistible glow. Its powerful formula penetrates deep into the fibers, lifting away dirt, grime, and odors, making your garments look and smell like new. Say goodbye to faded colors and hello to vibrant brilliance. With Ariel Liquid, your fabrics are treated with utmost care, maintaining their softness and longevity wash after wash. Trust its advanced care properties to shield your beloved clothes from wear and tear, ensuring they stand the test of time. Not only does Ariel Liquid excel in performance, but it’s also gentle on the environment. Its innovative, eco-friendly
Request for a quoteCOLOSTRUM BIOTEC GMBH
Germany
Standard applications Colostrum liquid, cold-sterile filtered whey, colostrum powder, freeze-dried, conventional and organic (DE-ÖKO-006) with 6 different IgG levels. IgG 15% (skimmed milk powder) IgG 20% (skimmed milk powder) IgG 25% (skimmed milk powder) IgG 30% (skimmed milk powder) IgG 35% (whey powder) IgG 60% (whey powder) Other services Recipe & product development of colostrum-based products in the areas of health and sports Contract processing or manufacturing Implementation of product designs tailored to your individual company CI, from the label to the outer packaging
Request for a quoteCOLOSTRUM BIOTEC GMBH
Germany
Our premium lifestyle brand with a focus on maternal and child health armacura based on colostrum is 100% natural immune protection for the whole family. The immune factors contained in armacura have the ability to prevent colds or acute upper respiratory tract infections. The armacura liquid concentrate consists solely of the cow’s first milk. This is obtained from controlled herds within the first 24 hours after calving, as the raw material colostrum has the highest concentrations of immune substances and growth factors during this period. Of course, only milk surpluses are used because the health of the newborn calves always has absolute priority. With a unique concentration of immunoglobulin G, armacura consists of over 400 interactive substances rich in amino acids, vitamins, minerals, trace elements, enzymes and natural growth factors. An ideal natural mix that is free of any additives.
Request for a quoteILUDEST DESTILLATIONSANLAGEN GMBH
Germany
The unit for the liquid/liquid extraction operates in a countercurrent flow and is designed as a pulsed column with sieve trays and packing material alternatively. The working principle of this unit is based on the fact, that the two liquid phases are pressed through the holes of each sieve tray or through the packing respectively, forced by the used pulsation, thus one phase will be dispersed into the other. The large contact surface which will be formed by this specific design, makes the product exchange between the two phases highly efficient. During the return travel of the pulsator, the drops previously dispersed are agglomerating into a homogeneous phase. The light phase will be fed into the system at the lower end of the column, while the heavy phase is entering the tower at the upper end. Due to the gravitation, supported by the said pulsation, both phases are passing the column in countercurrent way and are withdrawn at the opposite ends.
Request for a quoteILUDEST DESTILLATIONSANLAGEN GMBH
Germany
For liquidliquidextraction according to the MixerSettlerprinciple, design acc. to Dr. E. Müller (Lurgi). With screw stirrer for intensive mixing of the phases, especially suited for metallic salt extraction. Pumping capacity and residence times are changed by adjusting the stirrer speed. An additional advantage of the unit is the application for extractions during which reactions of considerable density changes occur. Typical applications for this universal apparatus are metal salt extractions mixtures with low surface tension if the dispersed phase coalesces with difficulty if variation in residence time of the phases occur in the extraction stages if reactions are expected during the extraction process if considerable changes in density are expected as a result of extraction
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ILUDEST DESTILLATIONSANLAGEN GMBH
Germany
Scientists and chemical engineers still measure phase equilibria despite the significant improvement in theoretical evaluations. Therefore, our phase equilibrium apparatus is part of the standard equipment in chemical engineering laboratories. The vapourliquid equilibrium of binary and multicomponent mixtures constitute an essential basis for the determination of the theoretical plates necessary for the evaluation of separation processes. Although VLEdata are known from literature, there is still an increasing tendency towards redetermining equilibrium data by experiments, because the thermodynamic parameters like pressure, temperature and concentrations are different or inadequate. For designing e.g. extractive distillation processes the evaluation of vapourliquidliquid phase equilibria (VLLEdata) are required. The practical measurement and determination of these data proves difficult with the standardised VLEunits because of the phase formation of the liquids.
Request for a quoteFIBALON GMBH
Germany
To improve the filtration performance, the innovative filter solution FIBALON®skimmy is recommended. FIBALON®skimmy consists of a fiber combination of different polymer fibers with specially designed surface structures and different fiber cross-sections. The developed dynamic fiber fixation Dyfix® guarantees a high particle retention rate and a deep penetration of particles into the filter media bed. Due to the unique fiber combination, FIBALON®skimmy retains finer particles than the skimmer basket. This relieves the entire filter system in addition. She spherical shape guarantees the optimal adaption to all skimmer sizes up to 25cm (9,84 inch) diameter. The spherical shape of the innovative FIBALON® filter material remains even with complete loading. The special net ensures an optimal alignment and orientation of the FIBALON® filter elements. Moreover, the net acts as protective shield. The welding seams, as well as the mesh are extremely resistant to chemicals and chlorine.
Request for a quoteFIBALON GMBH
Germany
FIBALON®system offers as the only filter system in the world the opportunity to take full advantage of all the benefits of modern filtration. With FIBALON®system, you will combine for the first time all the energy-saving potential as well as saving long-term operating costs. The investment in FIBALON®system will amortized within one year. FIBALON®system offers a simple and clear system consisting of 5 bags FIBALON® polymer filter material, innovative energy-saving pump and 600mm filter vessel with 6-Way Side-Mount-Valve. All this pre-assembled on a base plate – easy and simple for you. Whether to upgrade or for a new purchase! FIBALON®system continued the basic ideas of FIBALON®. FIBALON®system provides simple and clear solutions. FIBALON®system can also be acquired individually. A simple and clear solution as an „all-inclusive package” up to 60m³ for minimal investment costs.
Request for a quoteFIBALON GMBH
Germany
FIBALON®compact pro deluxe is THE universal filter solution „Made in Germany“ for your whirlpool, Jacuzzi or spa. The selected spherical shape, the special packaging size and the specially developed protective grid made of V4A stainless steel, enable a universal use with unique filter performance. The curvature of the grid ensures a full faced flow through the filter media bed and guarantees best cleaning results. The FIBALON®compact pro deluxe also has the worldwide unique dynamic fiber fixation „DyFix®“, which guarantees an incomparable filtration performance and a high dirt absorption capacity. This results in less service and cleaning effort. FIBALON®filter materials are always made of recycled materials to protect the environment. It has an antibacterial effect for the fibers and guarantees a long service life. Moreover, it is easy to clean and to reuse. The water in your whirlpool will be optimally disinfected without limitations in water circulation.
Request for a quoteFIBALON GMBH
Germany
FIBALON® is an innovative filter material developed especially for the aquaristic expert sera GmbH. As a full-service supplier for aquaristics, garden ponds and terraristics, sera has been successfully operating on the market since 1970. Sera knows the requirements and all the details in the mentioned markets. „Made in Germany“ and highest quality guidelines are important criterias in the business activities of sera GmbH and as well as for FIBALON®. Also it is perfectly suitable for all types of ponds. Independent from the size of the filter FIBALON®plus will clean your water crystal clear. It has a perfect shape for settling filter bacteria and also a huge dirt loading capacity.
Request for a quotePURASOL GMBH
Germany
Cleaner, solvent-based or without labelling obligation, technical and medical products, cosmetic products in different packagings, pump sprays, canisters, barrels
Request for a quoteNASH - ZWEIGNIEDERLASSUNG DER GARDNER DENVER DEUTSCHLAND GMBH
Germany
This rugged and reliable liquid ring compressor expaned the NASH Vectra compressor range with a model that operates at up to 4 bar G (60 PSIG). The XM-150 comes in 681 and 682 compliant versions and is specifically designed for the higher pressures and performance requirements found in many process applications, including vapor recovery, flare gas recovery, biogas, corrosive gas handling (e.g. VCM and chlorine) and hydrogen compression. The NASH Vectra XM-150 liquid ring compressor provides the same quality and reliability you've come to expect from the existing Vectra series with these features: Single, conical port design; Between bearing rotor/shaft design; single pressure boundary sealing point; API-681 and API-682 category II/III compliance; increased bearing life; 316 stainless steel construction; and horizontal, self-draining inlet/discharge nozzles. The rugged construction and easy to service design of this liquid ring compressor reduces maintenance requirements and minimizes downtime for maintenance and repairs in even the most demanding applications.
Request for a quoteNASH - ZWEIGNIEDERLASSUNG DER GARDNER DENVER DEUTSCHLAND GMBH
Germany
15 - 140 CFM / 35 to 210 m³/h Designed from the ground up to meet the widespread needs of the process industry, the Vectra SX adds five models to Nash’s Vectra series in the 1 ½ to 10 HP range at 60 Hz (0.75 to 5.5 kW at 50 Hz), providing the right solution for small capacity vacuum pump requirements. Designed to use less energy and consume less operating liquid than competitive models, it is possible to save the user as much as 40% on power consumption and 50% on water usage.
Request for a quoteNASH - ZWEIGNIEDERLASSUNG DER GARDNER DENVER DEUTSCHLAND GMBH
Germany
120 - 5300 CFM / 195 to 9,000 m³/h The NASH Vectra was designed around a modular platform using the most advanced computer aided design techniques, such as 3D solid modeling and finite element analysis (FEA). The modular platform offers the advantage of two versions with numerous common parts. The Vectra GL model, available from 120 to 830 CFM (200 to 1,500 m³/hr), is ideal for general industrial applications. It comes standard with internal mechanical seals and many Nash patented innovations including gas scavenging. The Vectra XL model was designed to meet the stringent requirements of many CPI applications. Whether operating as a vacuum pump or compressor, it features a 30 PSI (2 bar) differential capability. It is available in ductile iron or 316L stainless steel with a variety of shaft sealing options. Sizes range from 120 to 5,300 CFM (200 to 9,000 m³/hr). The NASH Vectra can be operated within a wide range of operating speeds, with numerous 50 and 60 HZ direct drive speeds. This increased turndown capability makes them ideal for varying load applications when driven by VFD's.
Request for a quoteNASH - ZWEIGNIEDERLASSUNG DER GARDNER DENVER DEUTSCHLAND GMBH
Germany
1800 - 2600 CFM / 3,050 to 4,400 m³/h Found primarily in petroleum refineries and chemical plants, this rugged and reliable compressor handles highly toxic, explosive and corrosive gases in applications such as flare-gas, chlorine and Vinyl Chlorine Monomer (VCM) recovery. Together with the 14 new GARO models and other NASH liquid ring compressors, the NASH HP-9 compressor form the NASH core compressor product line, which provides compression greater than 200 psig (15 Bar abs). Low pressure compressors are available to 30 psig (3 Bar abs), and 20,000 CFM (34,000 m³/hr). As a result, NASH offers the widest pressure and capacity ranges of liquid ring compressors available worldwide.
Request for a quoteNASH - ZWEIGNIEDERLASSUNG DER GARDNER DENVER DEUTSCHLAND GMBH
Germany
100 - 1800 CFM / 170 to 3,050 m³/h The GARO line of liquid ring compressors expands the capacity and pressure ranges of the Nash line to meet the ever growing requirements of our customers. Found primarily in petroleum refineries and chemical plants, these rugged and reliable compressors handle highly toxic, explosive and corrosive gases in applications such as flare-gas, chlorine and Vinyl Chlorine Monomer (VCM) recovery. The GARO line, available in single and two-stage designs, comes in: cast iron, stainless steel, carbon steel, spheroidal cast iron, 316 stainless steel, duplex stainless steel, and Hastelloy or Titanium on select models. Together with other NASH liquid ring compressors, including the HP-9, the 14 GARO models form the NASH core compressor product line, which provides compression greater than 200 psig (15 Bar abs). Low pressure compressors are available to 30 psig (3 Bar abs), and 20,000 CFM (34,000 m³/hr). As a result, NASH offers the widest pressure and capacity ranges of liquid ring compressors available worldwide.
Request for a quoteNASH - ZWEIGNIEDERLASSUNG DER GARDNER DENVER DEUTSCHLAND GMBH
Germany
3000 - 16000 CFM / 5,100 to 27,200 m³/h The NASH 905 is a redesign and upgrade of the NASH 904. Capacities of the 904 pumps range upward from about 3,000 CFM at vacuum. These durable compressors can handle excess liquid carryover without any difficulty, even if it arrives as massive slugs. 904 compressors are found in many industries, including Paper, Chemical, and Mining. The 905 series has been designed to provide superior reliability and performance in harsh applications such as chemical processing or geothermal power generation. Constructed of 316L stainless steel, the 905 series offers excellent corrosion resistance and can be outfitted with a variety of mechanical seals. It also includes a patented gas scavenging feature.
Request for a quoteResults for
Liquids - Import exportNumber of results
34 ProductsCompany type