Industrial machinery equipment - Import export

Flottweg nozzle separators (2- and 3-phase nozzle separators) are used for the continuous separation of solids from liquids and ensure highly efficient clarification or separation. The product to be clarified or separated flows via a stationary inlet pipe into the inside of the bowl and is gently accelerated to operating speed by the distributor. Characteristics of our nozzle separators: — Energy-optimized and low-wear bowl design — High performance — Simple and fast maintenance — Designed for perfect hygiene The Flottweg nozzle separators are available in two basic designs: — Clarifier / 2-phase nozzle separator — Concentrator / 3-phase nozzle separator

The Flottweg Belt Press is in use in many mechanical separation technology areas, especially in the production of fruit juice, concentrate and vegetable juice. But other products, too, such as algae extracts, coffee grounds, herbal extracts, soy, and starch, are produced using belt presses. Flottweg Belt Presses: ►Maximum quality: You obtain not just the best possible quality, also maximum yield at lower costs. ►Minimum operating difficulty: Its clear design makes it easily accessible for cleaning, operation and maintenance. Automatic belt control provides optimum tension and guidance of the belts. ►Long-lasting design: The consistent use of stainless steel means that the belt press not only meets the requirements of strict hygienic standards, also is built tougher to last longer. ►Flottweg Service: We are at your side at any time with years of experience and comprehensive know-how.

After every successful filling of a package, it is a basic condition for precise dosing that the thread is defined and breaks off cleanly. This effect usually occurs with water-like materials - with viscous products, so called semi-solids, but often not: Many products such as creams, gels and ointments pull long threads from the tip of the dispensing needle into the respective packaging. The ViscoTec Pharma Dispensers provide a solution: After a dosing shot of the Pharma Dispenser, the product path through the chambers in the rotor-stator system is blocked, thus preventing dripping of the dosing medium. A valve at the dosing needle or at the pump is not necessary. Thanks to the reversible direction of rotation, retraction can be set after the end of dosing: The material is drawn back into the dosing needle in a defined manner.

The dispenser based on the ViscoTec endless piston principle is particularly suitable for the filling, dosing or application of viscous, abrasive, highly filled or shear-sensitive materials. There are three different versions of the volumetric dosing system: 3VHD8, 3VHD12 and 2VHD12. Important key data: - Withdrawal option (no dripping or thread pulling) - absolutely linear relationship between rotor speed and spread rate - long service life due to media-specific component selection - quick and easy disassembly/assembly - Sealless, easily dismountable rotor string - process-safe and high-precision filling/dosing - variable quantities infinitely adjustable - compact construction Hygienic features: - Design according to EHEDG guidelines - FDA-compliant design/development - hygienic and pharmaceutical design - Interior with optimised dead space - all surfaces Ra ≤ 0.8 μm - rinsing connection for automatic cleaning

Flottweg nozzle separators (2- and 3-phase nozzle separators) are used for the continuous separation of solids from liquids and ensure highly efficient clarification or separation. The product to be clarified or separated flows via a stationary inlet pipe into the inside of the bowl and is gently accelerated to operating speed by the distributor. Characteristics of our nozzle separators: — Energy-optimized and low-wear bowl design — High performance — Simple and fast maintenance — Designed for perfect hygiene The Flottweg nozzle separators are available in two basic designs: — Clarifier / 2-phase nozzle separator — Concentrator / 3-phase nozzle separator

Flottweg nozzle separators (2- and 3-phase nozzle separators) are used for the continuous separation of solids from liquids and ensure highly efficient clarification or separation. The product to be clarified or separated flows via a stationary inlet pipe into the inside of the bowl and is gently accelerated to operating speed by the distributor. Characteristics of our nozzle separators: — Energy-optimized and low-wear bowl design — High performance — Simple and fast maintenance — Designed for perfect hygiene The Flottweg nozzle separators are available in two basic designs: — Clarifier / 2-phase nozzle separator — Concentrator / 3-phase nozzle separator

The HELIO®MAT dryer station is part of the JETBOXX® system and features an independent JETBOXX® dryer with full functionality at each individual docking station. The material can be predried in removable drying containers at the dryer station. The drying container can be removed and brought to the processing machine if needed. It will be attached directly onto the feeding section there and the dried material can be processed. If the material should be kept dry on the machine, a JETBOXX® docking plate with dryer control are used in addition. HELIO®MAT is applicable for example as pre-drying station for quick material change, as dryer station for sampling batches, for batch drying for small quantities / sampling, for laboratory applications, or for cleanroom supply with hermetically sealed dry material containers. Material change without delay. No humidification. No cleaning issues.

Mobile plastic granules dryers from the JETBOXX® system are available with a volume of 30/50/75/200 litres and can be optimally adapted to your requirements with a large number of options. They can be used anywhere, where top-mounted dryers fail because of weight / or space reasons, and flexibility is required. When changing the setting of task, the components can be combined easily or used for example as top-mounted dryers. The compressed air-based dryers are maintenance-free and provide professional functions such as: plastic-specific and throughput dependent dryer settings, database for plastics, conveying control, week timer, overheating protection, dew point measurement, speed dial programs, personal programs, and many more.

The JETBOXX® mini top-mounted dryers are particularly applicable where small material flow rates with the highest drying precision are required. Due to their compact design, the plastic granulate dryers can be mounted on the feed section of the injection molding machine without any difficulty. The dryers are available with a volume of 0,5/1,0/2,5/5/6/12/18 litres and can be optimally adapted to your requirements with a large number of options from the JETBOXX® system. Compressed air conveyors of one or two components with or without dedusting function are available. Filling by hand is also possible via hinged covers. The compressed air-based dryers are maintenance-free and provide professional functions such as: plastic-specific and throughput dependent dryer settings, database for plastics, conveying control, week timer, overheating protection, dew point measurement, speed dial programs, personal programs, and many more.

HELIO®Clean 2 is a combined conveying-/ mixing-/ and dedusting device for virgin material and regrind. The dust is removed through a 2-stage dedusting system. The compact design makes it ideal for mounting on the feed zone of the processing machine or on a drying container. The separated dust content is sucked out into an external collection bin. Available in 1- or 2-component version, filling is carried out by the integrated compressed air conveying technology with Venturi suction lance(s). Quality: Dust in granules causes lowered mechanical properties of technical plastic resins, leads to problems with surface finish in case of transparent parts, to high rate of rejects basing on smudges or white/black dots in transparent injection moulding parts like for example optical lenses of PC and PMMA. Professional cleaning of resins brings the quality to the original state again and optically perfect parts can be produced.

JETBOXX® plastic granulate dryers are compressed air based dry-air dryers for mounting directly on the feed section of the processing machine. The JETBOXX® technology guarantees perfect drying results thanks to plastic-specific and throughput-dependent dryer settings. The dryers are available with a volume of 30/50/75 litres and can be optimally adapted to your requirements with a large number of options from the JETBOXX® system. The JETBOXX® control provides a database for plastics, conveying control, week timer, fully automatic decrease and resume of the drying intensity when production is interrupted (overheating protection), automatic restart with preheating program in 1- or 2 shift operation, dew point measurement, speed dial programs, personal programs, and many more. Compressed air conveyors of one or two components with or without dedusting function are available. The conveying control is already included.

HELIO®Clean 3 is a combined conveying-/ mixing-/ and dedusting device for virgin material and regrind. The dust is removed through a 3-stage dedusting system with ionisized air. The compact design makes it ideal for mounting on the feed zone of the processing machine or on a drying container. Available in 1- or 2-component version, filling is carried out by the integrated compressed air conveying technology with Venturi suction lance(s). Dedusting capacity up to 25 kg/h. Quality: Dust in granules causes lowered mechanical properties of technical plastic resins, leads to problems with surface finish in case of transparent parts, to high rate of rejects basing on smudges or white/black dots in transparent injection moulding parts like for example optical lenses of PC and PMMA. Professional cleaning of resins brings the quality to the original state again and optically perfect parts can be produced.

The MultiStick is able to tailor up to 6 different forms and capable of filling up to 6000 lipsticks per hour in 24/7 operation. Thanks to the new Plug & Play Technology with the rail mounting system for process stations, the machine can be easily upgraded without major frame rework. It also offers an optimized footprint with integrated compounding. The MultiStick assures the ultimate process flexibility in the whole filling technology.

Weckerle´s new Dry Powder Compacting Line complements the successful range of powder machines. The DPC assures dosing and pressing of various dry cosmetic powders, such as eye shadows and different kinds of face powders with an output up to 2,100 pcs/h. Through the integration of an automatic extraction system, a hygienic process is ensured. The servo-driven pressing station guarantees an easy adjustment of several parameters in correlation with your powder compound behavior to your specific requirements. Also an easy filling height adjustment is included. Each specific production set-up is available directly in the HMI. The user friendly designed machine is able to cater a wide range of formats and provides accurate pouring with perfect product surfaces. State of the art SMED designs enable product and format changes in just a few minutes.

Do you like efficiency? Find out more about our outstanding FEEDING SOLUTION – the FLEXFEEDER which is MANY STEPS AHEAD in terms of: > Range of formats, pick speed, pick rate > Operator-oriented guided setting & teaching for new products on one HMI > Easiest to operate compared to any other system > Up to 200 pcs./min with only one picker > Adaptable up-stream and down-stream to any existing and new machine types The highly efficient FlexFeeder robot can be applied for various industries, such as pharmaceutical, food or cosmetics. The robot feeding and/or packing system is configured for a wide range of components and shapes. It is perfect aligned for rigid and wavy trays but also for bulk packed components. Through the outstanding performance recognition a maximum throughput of up to 200 pcs/min with only one picker is assured. The outstanding FlexFeeder guarantees a faster, more precise and smoother product handling.

Weckerle´s FlexFill facilitates to fill a wide range of cosmetic products such as mascara, lip gloss, liquid liner, deodorant sticks, nail polish, etc. Furthermore, this machine offers the possibility to fill into a variety of packaging with different volumes and diameters. Therefore, absolute process control and highest flexibility is ensured. Output: up to 10800 pcs/h Linear filling process

The UF is Weckerle’s ultimate high speed filling machine with large output production. This machine is able to run a wide range of products with different volumes and diameters, such as chap sticks, make-up sticks, deodorant sticks/ tubes and various other products. The straightforward machine handling provides a highly efficient operation.

The MPL ensures dry powder pressing for different cosmetic powders, such as eye shadows and different kinds of face powder. This machine is able to cater a wide range of formats and packaging with high output and accuracy. The setup allows pouring up to 8 different colors into a single pan in only one dosing step.

Weckerle’s MM machine series, enables you to fill lipsticks and/or lip balms with different moulds in various shapes, diameters, and output. With these machines, Weckerle assures the ultimate perfection in the lipstick filling process. MultiMould Lipstick Filling and Processing Line MM 60: The fully servo-driven machine features 60 interchangeable moulds to customer’s specification for filling various hot poured cosmetic sticks such as lipstick, slim stick, lip balms, and make-up sticks. MM 180: The fully servo-driven MM 180 features 180 interchangeable moulds to customer´s specification for filling various hot poured cosmetic sticks such as lipstick, slim stick, lip balms, and make-up sticks. MM 360: The fully servo-driven MM 360 features 360 interchangeable moulds to customer´s specification for filling various hot poured cosmetic sticks such as lipstick, slim stick, lip balms, and make

Lipstick Filling and Processing Line The L 1800 is a sustainable and economical solution to serve all types of manufacturers of cosmetic products. The very compact L 1800 is able to produce up to 1.800 lipsticks per hour in 24/7 operation. Furthermore, the machine can be upgraded very cost-efficient for producing top filled products such as lipgloss, making it our most compact multi-functional machine available. Features: Weckerle Soft Mold Lipstick Molding Technology, Ergonomically comfortable machine with simple and intuitive handling, Small footprint enables highly efficient use of workspace, Innovative quality inspection camera

The effect achieved by the corona treatment is an increase in surface tension to values between 38 to 60 mN/m. Since the surface tension is caused by dispersive and polar interaction components the introduction of polar functional groups in particular increased the polar component of the surface tension.