Hydraulic pumps - Import export

Technical data UNI FUTURE with pressure transducer Pressure needs detection with switch-off upon reaching the required working pressure of 20 bis 850 bar Suitable for all tools with a oil flow to 700cm³ With built-in-pressure sensors for enhanced features and advanced settings Jogging for intermittent tool feed Power stepless adjustable, short time possible to 1,2 kW For Network and battery (24/230V) Powerful Li-Ionen battery 24 V 4,8 Ah The unit is designed so that the battery capacity is sufficient for one working day. Integrated charger Energy savin mode – Unit switches off 10 minutes after the last activity, or to low battery charge Shutdown at idle after the working cycle, prevents tool damage and saves energy Robust plastic housing Controls and coupling are set back behind the front edge of the housing Flow rate: automatically adjust to 1l/min Size L/B/H: 215 x 165 x 220mm (Handle height 40mm) Weight: ca. 6,9 kg SUPPLIED WITH Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Technical data UNI FUTURE 2050 SCU Also as a drive towards a cutting system Automatic detection with switch-off pressure required for achieving the required operating pressure of 20 bis 700 bar Suitable for all tools with a oil flow to 700cm³ With pressure gauge (1000 bar) and ground connector on the front side With pressure sensors for advanced features Detection tool with speed adjustment to (tool speed 10mm/sec) BG provision to fulfill Optional jogging for intermittent tool feed. Power adjustable,short time possible to 1,2 kW ch Network and battery (24/230V) Powerful Li-Ionen Battery 25,2 V 4,8 Ah The unit is designed so that the battery capacity is sufficient for one working day. Integrated charger Energy spaving mode– 10 minuets after the last activity or to low battery condition, switches off the unit Shutdown at idle after the working cycle, prevents tool damage and saves energy Robust plastic housing Controls and coupling are set back behind the front edge of the housing Flow rate: automatic adjustment to 1l/min Size L/B/H: 222 x 168 x 229mm (Handle height 40mm) Weight: ca. 6,9 kg Supplied with Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Technical data cube with pressure transducer and lock valve Pressure needs detection with switch-off upon reaching the required working pressure of 20 bis 850 bar Suitable for all tools with a oil flow to 700cm³ With built-in-pressure sensors for enhanced features and advanced settings Jogging for intermittent tool feed Power stepless adjustable, short time possible to 1,2 kW For Network and battery (24/230V) Powerful Li-Ionen battery 24 V 4,8 Ah The unit is designed so that the battery capacity is sufficient for one working day. Integrated charger Energy savin mode – Unit switches off 10 minutes after the last activity, or to low battery charge Keeps the pressure of max. 850 bar upon actuation of the stop valve Robust plastic housing Controls and coupling are set back behind the front edge of the housing Flow rate: automatically adjust to 1l/min Size L/B/H: 215 x 165 x 220mm (Handle height 40mm) Weight: ca. 6,9 kg The lock valve for pipe crimping tools prevents reduction of oil pressure in the tool. So it is possible to hold hydraulic pressure over not time limited space. Supplied with Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Technical data ED 100 To drive the nitrogen charging apparat «SL 230 SLG» and all crimping and cutting tools. Designed for continuous use Maximum pressure: 850 bar Delivery volume: up to 0,8L/min Fitting to all tools with oil demand up to 700cm³ Shiftable automatic detection of pressure requirement with switching off at the Essential working pressure from 20 to 850 bar Built in pressure sensor for improved functionality and enhanced adjustment Inching function for interrupted tool infeed Robust housing, operating elements and coupling are built in secured under body top Weight: ca.14 kg Supplied with Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Tool bag for hydraulic power unit Uni Future 2050 High strengh grey polyester-woven fabric Waterproof > 0,2 bar High scouring resistance Protect your tools from external environmental influences (Dirt/Dust) Overall space-saving storage Easy handling Low weight DIMENSIONS: 350 x 280 x 300 mm

Metal-free high pressure hose with quick coupling set and dust cup for coupling Length: 2m

Dust caps for hydraulic quick release couplings. To protect against damage and contamination of couplings and nipples.

Dust caps for hydraulic quick release couplings. To protect against damage and contamination of couplings and nipples.

Pressure gauge to check the working pressure to 1000 bar For use when used as a safety cutting system or monitoring purposes

with PUR-insulation usable from -40°C to +90°C

complete for hydraulic unit Uni Future 2050

complete for hydraulic unit Uni Future 2051

Suspension strut (gas hydraulic shock absorber) by LEBENDahmenstechnik GmbH Advantage Use in pulling and pushing direction Small design Variable preload force of the damper Used as a buffer in Amphibious vehicle Underground shuttle … Illustrated suspension strut Damping of the independent suspension of an amphibious vehicle Special feature Nitrogen gas spring as triple membrane accumulator Regulation of the spring stiffness while driving

Due to many years of experience in the field of damping technology, LEBEN is able to replace shock absorbers of other makes from various manufacturers. The required characteristics of the damping property as well as the dimensions of these industrial shock absorbers to be replaced can usually be met by a replacement shock absorber made by LEBENDämpfungstechnik GmbH.

Rotating Piston Absorbers are displacement absorbers using hydraulic flow resistance. They are used to damp rotational vibrations, e.g. absorbers for ropeway cabins (see VDIRichtlinie VDI 3833 German Association of Engineers, sheet 1). The design is customized. Due to different operating conditions, no standard design is possible. (see also VDIGuideline, VDI 3833 sheet 1)

Vibration absorbers are produced in several configurations SINGLE TUBE VIBRATION ABSORBER for pull and push absorption at random mounting positions. The length is increased to keep the diameter dimension at a minimum. TWIN TUBE VIBRATION ABSORBERS for pull and push absorption. The preferred mounting position is vertically aligned. Compared to single tube absorbers, the length is decreased, while the diameter is enlarged. The characteristic of damping for both types can be progressive or degressive. (Detailed information concerning application and calculation can be found in the VDIGuideline VDI 3833 Bl.1+2 – German Association of Engineers Guideline.)

Shock reducing elements by LEBENDämpfungstechnik GmbH known as hydrostatic, viscoelastic or elastofluid shock absorbers with an integrated springdamper operating principle. Advantage Use in pulling and pushing direction Small design Very high preload of the shock absorber Individual reset force of the piston rod depending on the application Used as a buffer in Railway couplings Water locks / sluices … Illustrated hydrostatic buffer Damping of the pretensioned rope catch (tensioned catch rope) in front of a water lock

Assembly immediately upon receipt of order - generally in stock Category Hydraulic systems, valves and components / Hydraulic systems for commercial vehicles / Hydraulic sets / Piston pump sets Product number supplier 456001

Assembly immediately upon receipt of order - generally in stock Category Hydraulic systems, valves and components / Hydraulic systems for commercial vehicles / Hydraulic sets / Piston pump sets Product number supplier 456000

External gear pumps industry Material: Aluminum Series 2, clockwise English-Italian front-flange centering standard Ø 36,45 mm, conical shaft 1:8 with BSP threaded connection Category Hydraulic systems, valves and components / Hydraulic pumps / Gear pumps / 1-time / Size 2 / English-italian standard Ø 36,45 mm conical shaft 1:8 with thread connection, clockwise Product number supplier 452127272

External gear pumps industry Material: Aluminum Series 2, clockwise English-Italian front-flange centering standard Ø 36,45 mm, conical shaft 1:8 with BSP threaded connection Category Hydraulic systems, valves and components / Hydraulic pumps / Gear pumps / 1-time / Size 2 / English-italian standard Ø 36,45 mm conical shaft 1:8 with thread connection, clockwise Product number supplier 452127272

External gear pumps industry Material: Aluminum Series 1, clockwise English-Italian front-flange centering standard Ø 25.35 mm, conical shaft 1:8 with BSP threaded connection Category Hydraulic systems, valves and components / Hydraulic pumps / Gear pumps / 1-time / Series 1 / English-italian standard Ø 23,35 mm conical shaft 1:8 with BSP-thread connection, clockwise Product number supplier 452126071

External gear pumps industry Material: Aluminum Series 1, clockwise English-Italian front-flange centering standard Ø 25.35 mm, conical shaft 1:8 with BSP threaded connection Category Hydraulic systems, valves and components / Hydraulic pumps / Gear pumps / 1-time / Series 1 / English-italian standard Ø 23,35 mm conical shaft 1:8 with BSP-thread connection, clockwise Product number supplier 452126071

AROS Hydraulikaggregate werden sowohl in Werksnorm als auch in Sonderausführung nach Ihrer Spezifikation gebaut.Ö lbehälter in Edelstahl oder Stahl mit einem Fassungsvolumen von 6 bis 2.000 Liter kommen in geschweißter Ausführung zum Einsatz. Der Ventil- und Steuerungsaufbau wird vorzugsweise in modularer Verkettungstechnik, jedoch auch in Fronttafelaufbau realisiert. Bei den Konstant- oder Verstellpumpen, auch für nichtbrennbare Flüssigkeiten, werden ausschließlich namhafte Hersteller verwendet. Die Verkabelung auf Klemmenkasten bis hin zur kompletten Elektrosteuerung ist entsprechend Ihrem Wunsch möglich.