Digital - Import export

The DCT 533P is suitable for food / beverage and pharmaceutical industry as well as, for applications where a totally flush pressure port is required. The special design prevents condensation inside the pressure transmitter and thus a failure in applications with large temperature changes. The integrated, standardised IO-Link interface increases productivity and supports the operator in service and maintenance. Properties can be read and qualified via IO-Link, which helps the user to assess the state of system or process. Features: — nom. pressure: 0 ... 100 mbar up to 0 ... 40 bar — accuracy: 0.35% (opt. 0.25%) FSO — IO-Link acc. to specification V 1.1 — Data transfer 38.4 kBaud — Smart sensor profile — hygenic version — CIP / SIP cleaning up to 150 °C — ingress protection Ip 67 / IP 69 — diaphragm with low surface roughness Optional Features: — cooling element for media temp. up to 300 °C — different process connections

The DCL 571 with RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master slave architecture with which up to 247 slaves can be questioned by a master – the data will transfer in binary form. The probe was developed for level measurement in waste water, sludge or water courses. The mechanical robustness of the flush ceramic diaphragm facilitates an easy disassembly and cleaning of the probe in case of service. The outside-diameter is only 22 mm for easy installation and back fitting in 1″ tubes or in cramped fitting conditions Features — Nominal pressure from 0 ... 1 mH2O up to 0 ... 100 mH2O — accuracy: 0.35% (opt. 0.35 %) FSO — output signal: RS485 with Modbus RTU protocol — diameter 22 mm — highly appropriated for sewage water Optional features — drinking water certificate according to DVGW and KTW

The stainless steel probe DCL 551 with RS485 in-terface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master slave architecture with which up to 247 slaves can be questioned by a master – the data are transferred in binary form. DCL 551 has been designed for hydrostatic level measurement in sewage as well as for viscous and pasty media. Basic element is a robust and high overpressure capable capacitive ceramic sensor. Features — Nominal pressure: from 0 ... 40 cmH2O up to 0 ... 200 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — output signal: RS485 with Modbus RTU protocol — diameter 39.5 mm — excellent long term stability — especially for sewage, viscous and pasty media Optional features: — diaphragm ceramics Al2O3 99,9%

The stainless steel probe DCL 531 with RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master Slave architecture with which up to 247 Slaves can be questioned by a master – the data are transferred in binary form. Basic element is a high quality stainless steel sensor with high requirements for exact measurement with excellent long term stability. Features — nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O — accuracy: 0.25 % FSO — output signal: RS485 with Modbus RTU protocol — diameter diameter 26.5 mm — small thermal effect small thermal effect — high accuracy excellent accuracy — reset function Optional Features — drinking water certificate according to DVGW and KTW — different kinds of cables — different kinds of seal materials

Compact digital positioner for mounting on linear and quarter turn actuators. Minimum air consumption in the regulated state. The configuration software "DeviceConfig" enables easy parameterization and diagnostics. This positioner can be configured in different versions with different accessories.

The Type 2040 an visual and electronic position indicator for mounting on pneumatic valves with linear or rotary actuator is characterized by a compact design, the possibility to identify the valve position via switch contacts. The various configurations and diagnostic function can be managed via the standard Schubert & Salzer PC Software "DeciveConfig".

The digital pressure gauge DM 01 is a precision device fulfilling highest demands. It was conceived especially for the process monitoring and calibration. The advantage: With the digital display DM 01, different pressure transmitters can be used for various measurement ranges. Outstanding measuring qualities, an intuitive operation, as well as an innovative, modular sensor concept characterise the DM 01. The battery-powered digital pressure gauge can be used e.g. for controlling pressure courses or calibrating pressure transmitters. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 400 bar — accuracy: 0.05 % FSO BFSL (class 0.05) — modular sensor concept — graphics-capable display — background illumination — communication interface USB 2.0 — stainless steel housing d = 100 mm — zero point calibration — data logger Optional Features: — accredited calibration certificate — IS-version zone 0/1

The battery-powered BAROLI 02 enables a local displaying of values, satisfying the highest demands for accuracy and long-term stability. The pressure gauge may be applied compatible with the stainless steel used; it shows an excellent robustness and a high overpressure protection. The BAROLI 02 display housing is rotatable, thus ensuring an easy reading even under unfavorable mounting conditions. Additional functions: changing the unit, displaying min / max values, calibrating of offset and the span, configuring the automatic switching-off. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 600 bar — accuracy: 0.125 % FSO — stainless steel diaphragm — 2-line LC display, 4.5-digit 7-segment display, 6-digit 14-segment additional Display — mechanical connections: inch, NPT threads Optional Features: — min- / max-function with reset function — offset and end point calibration — setting the pressure unit

The battery-powered digital pressure gauge BAROLI 05 has been designed for measuring the pressure (absolute or gauge) of fluids, oils and gases. The display housing is rotatable, thus ensuring an easy reading even under unfavorable mounting conditions. Additional functions as changing unit, displaying min / max values, calibrating the offset and of span, as well as configuring the automatic switching-off complete the profile. Features: — nominal pressure: 0 ... 400 mbar up to 0 ... 600 bar — accuracy: 0.25 % FSO BFSL (class 0.2) — rotatable housing — 2-line LC display, 4.5-digit 7-segment display, 6-digit 14-segment additional display — different mechanical connections: inch, NPT threads — ceramic diaphragm Optional Features: — min / max function with reset function — offset and end point calibration — setting the pressure unit — switch-off automatic configuration

The BAROLI 05P enables a local displaying of values in applications, where high requirements on hygienic process connections and easy cleaning or sterilisability are requested. The filling medium is food compatible oil with FDA approval. The display housing is rotatable, thus ensuring an easy reading even under unfavorable mounting conditions. Additional functions as changing unit, displaying min / max values, calibrating of offset and span, as well as configuring the automatic switching-off complete the profile. Features: — nominal pressure: 0 ... 60 bar up to 0 ... 400 bar — accuracy: 0.25 % FSO BFSL (class 0.2) — flush welded stainless steel diaphragm — rotatable housing — 2-line LC display, 4.5-digit 7-segment display, 6-digit 14-segment additional display — suited for viscous and pasty media Optional Features: — min / max function with reset function — offset and end point calibration

The digital pressure gauge DL01 is a precision device fulfilling highest demands. It was conceived especially for leak testing or pipeline monitoring. The advantage of the DL01 is that it consists of two devices - the digital display and the pressure transmitter -which can be combined without any tools. Outstanding measuring qualities, an intuitive operation, as well as an integrated data logger characterize the DL01. In addition, the graphic display provides the handling and the clear presentation of the measuring procedure. Features: — nominal pressure: 0 …100 mbar up to 0 ... 400 bar — modular sensor concept — data logger — graphics-capable display — stainless steel housing d = 100 mm — communication interface USB 2.0 Optional Features: — data logger interval 1s ... 99 days or fixed time — default values for time / test duration — zero point calibration

The compact low-cost digital pressure gauge DM 10 is battery-powered and has an adjustable housing; it is thus extremely suitable for mobile pressure monitoring. The 4.5-digit LC-display indicates the battery status, the mea-surement value as well as the unit, this enables a fast and precise reading. It is possible to switch between the most common units (bar, psi, Pa, MPa). Additional functions as auto-zero, min / max values and an automatic switching-off complete the DM 10 profile. Features: — nominal pressure: 0 ... 1.6 bar up to 0 ... 250 bar — accuracy: 0.5 % FSO BFSL (class 0.5) — ceramic diaphragm — adjustable housing — LC display, 4.5-digit 7-segment display — standard battery CR 2450 operating period > 1.800h Optional Features: — min / max function with reset function — auto-zero — setting the pressure unit — automatic switch-off cofiguration

The battery-powered BAROLI 02P enables a local displaying of values in applications, where high requirements on hygienic process connections and easy cleaning or sterilisability are requested. The filling medium is food compatible oil with FDA approval. The display housing is rotatable, thus ensuring an easy reading even under unfavorable mounting conditions. Additional functions: switching the unit, displaying min / max values, calibrating the offset and the end point, configuring the automatic switching-off. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 40 bar — accuracy: 0.125 % FSO BFSL (class 0.1) — 2-line LC display, 4.5-digit 7-segment display, 6-digit 14-segment add. display — hygienic process connections, EHEDG — flush welded stainless steel diaphragm Optional: — min/max function with reset function — offset and end point calibration — setting the pressure unit — configuration of switch-off automatic

TOPTICAs DigiLock 110 is the versatile solution for laser control, stabilization, characterization & analysis. Its digital nature makes it easy to use, flexible and intelligent. The FPGA based hardware allows for high bandwidth and flexibility, and with its clever software one has the overview, but can go into every tiny detail if need be.

The ND 280 digital readout for one axisis designed for simple measuring and positioning tasks, such as infeed for a circular saw, the stroke of press travel, or the position of an additional rotary table on a machine tool. Design The ND 200 series features a sturdy aluminum die-cast housing. The splashproof full-travel keyboard is built for the workshop. A large graphic TFT monitor displays the measured values, the status and the soft-key row. Functions The standard ND 280 readout provides the basic functions for simple measuring and positioning tasks. The ND 287 evaluation unit (see catalog titled Evaluation Electronics for Metrology Applications) offers expanded functions such as metrological acquisition and statistical evaluation of measured values. With its switching inputs and outputs, it also permit operation in simple automated environments.