Digital - Import export

The DCT 533P is suitable for food / beverage and pharmaceutical industry as well as, for applications where a totally flush pressure port is required. The special design prevents condensation inside the pressure transmitter and thus a failure in applications with large temperature changes. The integrated, standardised IO-Link interface increases productivity and supports the operator in service and maintenance. Properties can be read and qualified via IO-Link, which helps the user to assess the state of system or process. Features: — nom. pressure: 0 ... 100 mbar up to 0 ... 40 bar — accuracy: 0.35% (opt. 0.25%) FSO — IO-Link acc. to specification V 1.1 — Data transfer 38.4 kBaud — Smart sensor profile — hygenic version — CIP / SIP cleaning up to 150 °C — ingress protection Ip 67 / IP 69 — diaphragm with low surface roughness Optional Features: — cooling element for media temp. up to 300 °C — different process connections

The DCL 571 with RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master slave architecture with which up to 247 slaves can be questioned by a master – the data will transfer in binary form. The probe was developed for level measurement in waste water, sludge or water courses. The mechanical robustness of the flush ceramic diaphragm facilitates an easy disassembly and cleaning of the probe in case of service. The outside-diameter is only 22 mm for easy installation and back fitting in 1″ tubes or in cramped fitting conditions Features — Nominal pressure from 0 ... 1 mH2O up to 0 ... 100 mH2O — accuracy: 0.35% (opt. 0.35 %) FSO — output signal: RS485 with Modbus RTU protocol — diameter 22 mm — highly appropriated for sewage water Optional features — drinking water certificate according to DVGW and KTW

The stainless steel probe DCL 551 with RS485 in-terface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master slave architecture with which up to 247 slaves can be questioned by a master – the data are transferred in binary form. DCL 551 has been designed for hydrostatic level measurement in sewage as well as for viscous and pasty media. Basic element is a robust and high overpressure capable capacitive ceramic sensor. Features — Nominal pressure: from 0 ... 40 cmH2O up to 0 ... 200 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — output signal: RS485 with Modbus RTU protocol — diameter 39.5 mm — excellent long term stability — especially for sewage, viscous and pasty media Optional features: — diaphragm ceramics Al2O3 99,9%

The stainless steel probe DCL 531 with RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master Slave architecture with which up to 247 Slaves can be questioned by a master – the data are transferred in binary form. Basic element is a high quality stainless steel sensor with high requirements for exact measurement with excellent long term stability. Features — nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O — accuracy: 0.25 % FSO — output signal: RS485 with Modbus RTU protocol — diameter diameter 26.5 mm — small thermal effect small thermal effect — high accuracy excellent accuracy — reset function Optional Features — drinking water certificate according to DVGW and KTW — different kinds of cables — different kinds of seal materials

With the properties of the new DT300P digital power source, TIG welding can be significantly simplified: There are numerous options in a compact 30 kg unit. With a multitude of pulse options, the device can be ideally set for different tasks: A controlled heat supply ensures optically clean and even seam structures during low-pulse welding (up to 20Hz) - especially with different material thicknesses. The high arc stability in high-pulse welding (from 20 to 500 Hz), on the other hand, is demonstrated in the lower current range, especially in thin sheet metal applications: welding can be carried out without any problems from a material thickness of 0.3 mm. The robust 80 kHz IGBT inverter stands for reliability and extreme arc stability - even with low currents. The digital control panel, which is designed for rough industrial use, offers many advantages for the user.

Digitization basically means the transformation from analog to digital. More broadly, we speak of the digital transformation of companies. The pandemic has forced digital transformation to accelerate in many places. Video conferencing is daily business and working models such as remote or home office are absolutely usual. The digital transformation not only creates new products or services, but also creates major challenges for companies. After all, companies are not only going through technical processes such as the conversion of classic files into digital documents. Digitization also stands for holistic change as well as innovative and agile rethinking. Topics such as intelligent networking, IT security and high-performance data infrastructure are coming to the fore.  

Compact digital positioner for mounting on linear and quarter turn actuators. Minimum air consumption in the regulated state. The configuration software "DeviceConfig" enables easy parameterization and diagnostics. This positioner can be configured in different versions with different accessories.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

The Advanced Communications Platform Artist is a highly modular concept driving modern intercom demands. It is designed as a powerful matrix platform for intercom and the distribution of analog audio, digital audio, and Ethernet data signals. The system consists of a fiber-based network backbone providing a decentralized infrastructure for live audio and intercom applications. Artist is a digital matrix intercom system providing up to 1,024 x 1,024 non-blocking ports per system. The system is based on a dual optical fiber ring to form a single large, full summing, nonblocking distributed matrix. The system still “feels” like a single unit: it is completely non-blocking and has no limitations in the number of cross-points within or between the different nodes of the system.

RockNet 300 is a versatile digital audio network solution for live sound applications providing up to 160 channels and 96 kHz / 48 bit. RockNet is a real-time, low latency audio distribution network tailored to tour and installed sound applications. RockNet provides a universal solution to almost any imaginable audio distribution challenge and behaves very much like a traditional analog split system. It conveys up to 160 24 bit/48 kHz audio channels counter- rotating on a single CAT5 cable. RockNet products are designed for heavy-duty road use. Their ruggedized steel enclosures resemble the look and feel of a modular stage box. All devices feature locking IEC connectors for the redundant power supplies. All other connectors are entirely gold-plated, and the circuit design is streamlined for ultra low noise and minimum distortion to meet the highest demands in audio quality. RockNet is a genuine audio network platform designed purposely for live sound applications. It is a...

Performer Digital Partyline offers a wide range of components for digital partyline applications.

Riedel Artist is a true network infrastructure based on highly modular matrix mainframes. The individual Artist matrix mainframes can be equipped exactly as needed. But it is not only the mainframes themselves being modular and thus expandable, it‘s also the system‘s distributed architecture itself. Simply select the desired frame size and add the client cards you need. As your demands grow, you can easily expand your system by adding new client cards or additional frames to your system. And if you need to exchange a smaller frame for a bigger one you don’t need to buy new controller & client cards. Since all Artist frames feature the same type of cards, you can just simply use the cards you were using before. This scalability and expandability makes Artist a secure long-term investment.

DryLin® measuring system With display with clamp Fix rail or carriage Guide: DryLin® W DryLin® W - Digital measuring system DryLin® measuring system Ready-to-fit measuring device for external signal output Resolution 0,1 mm Accuracy +/- 0,025 Small sensor with integrated unit drylin® WKMEX measuring system with external output DryLin® measuring system With display with clamp Fix rail or carriage Guide: DryLin® W DryLin® W - Digital measuring system DryLin® measuring system Ready-to-fit measuring device for external signal output Resolution 0,1 mm Accuracy +/- 0,025 Small sensor with integrated unit drylin® WKMEX measuring system with external output

Design: CNS 18/10. Continuously adjustable digital temperature control from 30 - 150 °C.

For flush fitting. Design: CNS 18/10. With loosely attached thermostat, with built-in casing. Continuously adjustable digital temperature control from 30-150°C. Thickness of plate 2 mm, setback 15 mm all around.

The weight transmitter CSD-892 processes weight values from silo and vessel scales quickly and reliably with analogue load cells. Space-saving installation on DIN top hat rails. Configurable display for greater ease of use Time-saving configuration Connectivity for an easy data transfer Basic dosing possible without additional programming effort

KIRSCH Kunststofftechnik is specialised in digital printing, mainly for transparent plastics. We are offering competent support relating your ideas. Your provided data will be studiously processed for digital printing and regarding series, colour samples will be created and archived for colour-tuning afterwards. When digital printing there is no printing form needed compared to offset printing, so that individual solutions for imprint can be realised easier. For instance personalised imprint or company´s logo on your products. Digital printing is fitted for both series and single production. Our printing dimensions of 3000 x 2500 mm allow your ideas a wide spectrum.

Model 9180 supports force, pressure and torque sensors operating on the strain gauge principle, as well as the connection of position and angle sensors in potentiometer or DC/DC configuration. It also allows the measurement of process signals ± 1 V/ 5 V/ 10 V or 0 ...1 mA, 0(4) ... 20 mA. The current measured value is indicated on the 14 mm high LED main display, while a second display located directly below provides a reading of the peak value. The display is particularly suitable for highly accurate measurements due to the high accuracy of 0.1%. It is also possible to monitor up to 4 limit values and provide the results via relay or transistor outputs. Thus the process value display can be used for classification, process and control tasks. The current measured value is frozen on the display by activating an external HOLD signal. The TARE function is useful for balancing out previous loads for example.

The Type 2040 an visual and electronic position indicator for mounting on pneumatic valves with linear or rotary actuator is characterized by a compact design, the possibility to identify the valve position via switch contacts. The various configurations and diagnostic function can be managed via the standard Schubert & Salzer PC Software "DeciveConfig".

The range of functions has been limited deliberately to ensure operation is simple and self-explanatory. With its unique, large and clear digit height of 20 mm, the digital display can be installed easily in process control panels and control cabinets. Thanks to the large choice of measurement signals that can be indicated, the display is ideal for use in a huge range of industry-based applications. As a simple and compact digital display, it can also be used as a multi-channel solution in laboratory or test systems, where several different measurements may need to be taken and displayed simultaneously. Specific characteristics: — Less expensive digital display — For force, pressure or torque measurements using gauge sensors — Two limit alarms optionally available — Extremely easy-to-read display with 20 mm digit height — Display range -1999 to + 9999 — TARE function — Scaling possible using teach-in procedure or by entering sensor data directly

SIGNICOLOR is a pre-coated aluminum sheet that combines aesthetics and functionality. The high-quality surface of SIGNICOLOR is ideal for screen and digital printing, laminating and lacquering for aluminum signs. Due to its smooth, high-gloss finish, no further treatment is needed after delivery. This sheet is ideal for a broad range of applications, including advertising signs, pylons, informational signs, logos and stairway advertising. Used for aluminum signs both indoor and outdoor, SIGNICOLOR undergoes strict quality controls. It’s easy to handle, cost-effective, stable and durable.

In the fast-paced realm of business, innovation is the key to staying ahead. Our Research and Development (R&D) services are meticulously designed to propel your business into the future by seamlessly integrating Artificial Intelligence (AI), Internet of Things (IoT), and cutting-edge data analytics. Discover how our bespoke solutions can be the catalyst for a sustainable competitive advantage through digital transformation. In cooperation with our medium-sized international partner company, which employs the most brilliant minds, including graduates from Stanford and Princeton, we solve the most demanding mathematical challenges at the interfaces of physics, mathematics, mechanical engineering, IT, electronics, optics and artificial intelligence (AI). What makes us special are the interdisciplinary development teams, including IT specialists, engineers, mathematicians and physicists, who perform the most demanding contract development. Remuneration is purely performance-related.

Our service to print your products using high-quality digital heat transfers. ✔ Small quantities possible ✔ 100% digital printing with CMYK and white ✔ Photorealistic 1200 dpi ✔ Great price ✔ Fast shipping Products: tubes (cosmetic, industrial), airless dispensers, flying discs, spirits bottles, wine bottles, promotional products and more. Our printing service is for everyone who doesn't own printing equipment or prefers the ease of this service. With machines to print on mandel carried products, flat surfaces as well as cylindrical products, we can offer this service for a wide range of items. Furthermore, our range of heat trasfer technologies opens us up to print not only on differend shapes, but also different materials. From PP to ABS, glass, ceramics, wood, paper and many more. Reach out to us with your product or idea and we will come back to you with an honest answer.

Built-in counter-digital oval wheels Special features Other media, such as B. Frost protection and Windscreen cleaner, on request

The 9163 process value indicator covers a wide range of applications in which process values need to be measured, displayed, analyzed and transferred to higher-level control systems. Typical applications include measuring geometric values in production, for instance differential measurements, or testing material properties in the laboratory. The measured values can be transferred via PROFIBUS, RS232 interface or analog output. The multi-channel version can be used with up to four sensors. These sensors can be combined using mathematical functions, so that even complex measurement tasks can be performed with just the one instrument. Visual alarms on the display make it easier and more convenient to assess when values lie off-limits. Up to four configurable outputs are available as relay or logic outputs. The excellent measurement accuracy of 0.1% also makes this instrument suitable for high-precision applications.

The incremental digital displays are used in combination with our high-precision displacement sensors 8738. The digital technology of these measuring systems satisfies high demands for precision and long service life, as is required more and more nowadays — in measuring laboratories — in production — in testing laboratories — in workshops and many other areas. Typical uses: —Automatic assembly machines —Semiconductor industry —Keyboard tests —Robot controllers —Testing of shafts and planes —Measurement of differential displacement With its phenomenal resolution of 0.1 µm and the high response frequency of 20 MHz, the 9140 is a powerful display unit with a compact design. The comparator function integrated as standard allows for direct evaluation of measurements almost in real-time; these can be processed further by a higher-level controller. A rather more comprehensive acquisition method is also integrated into the system.

Digitally printed airless dispensers for your cosmetics business. ✔ Starting at 200 pcs. ✔ 15 to 50ml ✔ Protects your product ✔ Easy pumping ✔ Photo-realistic prints ✔ Fastest shipping Airless dispensers are a perfect packaging for your cosmetic product. As no air can enter the inside, your cream, gel, or serum will stay if perfect condition. To make your product stand out we offer digital printing services for it. Benefit from our range of airless dispensers for the fastest possible turnaround or send us the one you want us to print. For the printing we use digital heat transfers that are printed without UV or VOCs and can print details as tiny as 1-point small text. This way we can offer a high-resolution print at any quantity you need. From start-ups and special editions to white and private label up to a standard product. Personalized or serialized prints with safety features are also available.

Digitally printed cosmetic tubes for your cosmetics business. ✔ Starting at 200 pcs. ✔ 6 to 200ml ✔ PE or COEX bodies ✔ Flip-top or screw caps ✔ Photo-realistic prints ✔ Fastest shipping Cosmetics tube are a perfect packaging for your cosmetic product. Therefore, we offer digital printing services for them. Benefit from our in-stock tubes for the fastest possible turnaround or send us the one you want us to print. For the printing we use digital heat transfers that are printed without UV or VOCs and can print details as tiny as 1-point small text. This way we can offer a high-resolution print at any quantity you need. From start-ups and special editions to white and private label up to a standard product. Personalized or serialized prints with safety features are also available.

Precision: (at nominal temperature = 25 °C) NiCr-Ni: ±1% ±1 digit (from -20 to +550 °C or 920 to 1,150 °C) NiCr-Ni: ±1.5% ±1 digit (from 550 to 920 °C) Pt100, Pt1000: ±0.5 °C ±1 digit or ±1 °C ±1 digit Offset adjustment: (only with Pt100 and Pt1000) The sensor”s zero offset (e.g., caused by a long cable) can be adjusted with the aid of the offset trimmer on the rear of the device.