Bellows - Import export

Compact - minimal compression: With its new designed geometry microFIN feather elements interlock with the bellow elements. This enables the whole construction to achieve a compression of 2,4 mm per lamella. In comparison to regular bellows which have a relatively high compression rate, the whole machine stroke can be greatly enlarged. Anti-Scratch: With its unique coating at the bottom of each fin (lamella), scratching is prevented and the lifetime of the cover is increased significant (up to 70%). Additionally it increases the tightness against coolants and chips. (available for lamellas up to 1500 mm width) Exchange: Each lamella is removable from the bellow - corpus without disassembly of the whole cover systems. This is achieved by a plug connection between corpus lamella and protection lamella. Damaged lamellas can be removed easily and cost-effective. Fabric: Due to its modular construction, an additional fabric can be added to the cover system.

Individual textile bellows with and without protective lamellas in almost any desired shape and extent offer a cost-effective and flexible machine or guideway protection. A typical standard application for these products is the cover of linear guides or flat guides. Various synchronous mechanisms and damping variants are available for highly dynamic applications.

The sliding gate manual valve type for high temperature type 8053 in reinforced version is suitable for a wide range of process applications up to 530°C. Media such as steam, liquids, gases, etc. can thus be shut off safely and controlled excellently, even in the high temperature range.

• short design – with radial clamping hub • high torsional stiffness - flexible • Torque range: 2 - 12 Nm • Shaft diameter: 3 - 24 mm • Temperature range -40 to +200°C

• steel hub - welded design - temperatures up to 350°C • 4-corrugation bellows - short design - high torsional stiffness • Torque range: 1,5 - 15 Nm • Shaft diameter: 3 - 20 mm • stainless steel

• simple installation with radial EASY-clamping hub on both sides • steel hub - welded design - temperatures up to 350°C • 2-, 4- or 6-corrugation bellows - short design - high torsional stiffness • Torque range: 40 - 1.300 Nm • Shaft diameter: 12 - 90 mm » KG-VA = stainless steel optional

• with keyway connection on both sides • with integrated grooved ball bearing for high bearing reaction • cost-efficient execution • Torque range: 2 - 9.000 Nm • Shaft diameter: D1= 6 - 140 mm / D2= 6 - 110 mm

• conical hub on both sides • straight bellow - long design • Torque range: 25 - 2.500 Nm • Shaft diameter: 10 - 102 mm • low storing forces – high torsional stiffness

• low-cost version with set-screw • high torsional stiffness - flexible • Torque range: 0,4 - 8 Nm • Shaft diameter: 3 - 24 mm • Temperature range -20 to +90°C

• simple installation with radial EASY-clamping hub on both sides • 4-corrugation bellows - short design - high torsional stiffness • Torque range: 20 - 900 Nm • Shaft diameter: 10 - 75 mm

• simple installation with radial EASY-clamping hub on both sides • straight bellow - long design • low restoring forces – high torsional stiffness • Torque range: 25 - 1.500 Nm • Shaft diameter: 8 - 85 mm

• simple installation - split-hub design • wear and maintenance free • variable length stainless steel version up to 350°C • Torque range: 10 - 1.200 Nm • Shaft diameter: 7 - 85 mm

• simple installation - now also with splitted hub design on both sides • stainless design - variable length • Torque range: 10 - 900 Nm • Shaft diameter: 6 - 75 mm

• simple installation - splitted hub design on both sides • steel hub - welded design - temperatures up to 350°C • customized length with 2-, 4- or 6-corrugation bellows • Torque range: 20 - 1800 Nm • Shaft diameter: 8 - 85 mm

• conical hub on both sides • 6-corrugation bellows • Torque range: 10 - 4.000 Nm • Shaft diameter: 6 - 102 mm • cost-effective standard series

• several hub variants with a backlash free nose groove principle • blind assembly (plug in) possible - backlash free • sturdy whole metal version for temperatures up to 200°C • Torque range: 10 - 600 Nm • Shaft diameter: 6 - 70 mm

• Torque range: 4.000 - 70.000 Nm • 3-parted construction- easy to fit - variable in use • flange hub or conical ring hub • Shaft diameter: 60 - 220 mm • backlash free – exact torque transfer • high torsional stiffness - low moments of inertia • high tolerance of shaft displacements

• for direct mounting in a hollow shaft • 4-corrugation bellows - short design • Torque range: 2 - 600 Nm • Shaft diameter: D1: 3 - 68 mm / D2: 8 - 48 mm • internal axial buffer

• for standardized interface connection DIN - EN - ISO 9409 - 1 • two-part connection flange • compact design • Torque range: 40 - 1800 Nm • shaft diameter: 12 - 90 mm • simple installation with radial EASY-clamping hub at output side

• with radial clamping hub both sides • simple installation • compensations of sfaft misalignements - low restoring forces • Torque range: 0,5 - 3.000 Nm • Shaft diameter: D1= 5 - 90 mm / D2= 5 - 100 mm

• High-speed version for the highest operating speeds • Rotationally symmetrical clamping hub for optimum balancing quality

• easy to install clamping ring hub • bellowside with conical clamping hub for small shaft diameters • compensation of misalignments - low restoring forces • Torque range: 2 - 2000 Nm • Shaft diameter: D1= 6 - 70 mm / D2= 5 - 100 mm

• simple installation, with EASY-Clamping hub on both sides • 6-corrugation bellows - cost-effective standard series • Torque range: 20 - 1.800 Nm • Shaft diameter: 8 - 85 mm

• with conical clamping hub on both sides • compensations of shaft misalignments - low restoring forces • high balance quality - for small shaft diameters • Torque range: 2 to 9000 Nm • Shaft diameter: D1= 6 - 130 mm / D2= 5 - 120 mm

• steel hub - welded design - temperatures up to 350°C • 2-, 4-, or 6-corrugation bellows - short design - high torsional stiffness • Torque range: 30 - 1.000 Nm • Shaft diameter: 10 - 90 mm • stainless steel

• standard version with radial clamping hub • high torsional stiffness - flexible • Torque range: 0,4 - 12 Nm • Shaft diameter: 3 - 24 mm • Temperature range -40 to +200°C

• simple installation with optional radial EASY-clamping hub on both sides • steel hub - welded design - temperatures up to 300°C • 2-, 4- or 6-corrugation bellows - short design - high torsional stiffness • Torque range: 5 - 20Nm • Shaft diameter: 6 - 20 mm » KG-VA = stainless steel optional

• variable lengths from 55 to 260 mm • without additional intermediate storage • backlash-free, precise torque transmission • special symmetrical clamping hub with high balancing quality and for high operating speeds

• variable length up to 3 m • Low- Cost- Version with reduced operating parameters • backlash free, exact torque transfer • very easy to fit with splitted hub design • Torque range: 40 - 500 Nm • Shaft diameter: 14 - 70 mm • temperature range: -40°C up to +90°C