Al industrie - Import export

Particular Challenge: For the assessment of rotating parts, numerous parameters have to be taken into consideration: Concentricity, radial run-out and axial run-out (i.e. wobble); furthermore thickness, diameter, planarity and the absence of surface defects had to be examined. The solution developed by QuellTech consists in a configuration of three Q6 Laser Laser Scanners.Each of the lateral surfaces is assigned to its own scanner. In order to enable the thickness precisely to be determined, both laser lines are mutually oriented in opposite direction. The third scanner inspects the outer circumference of the wheel, this way measuring diameter and radial run-out. All of these scanners are subject to encoder signals supplied by the rotary axis and synchronously triggered, so possible defects on the wheel can precisely be localized. The measurement takes place at a resolution of ca. 30 µm, and a cloud comprising several millions of points are obtained.

Transmax Dual with Smooth Drive TechnologyTM is a fully synthetic, smooth-running transmission oil that was specially developed for dual clutch transmissions from various car manufacturers such as Ford, Volvo, Chrysler, Dodge and Mitsubishi . Also recommended for use in the DQ 250 (DSG) dual clutch transmission according to VW part number G 052 182 for VW, Audi, Seat and Skoda. Transmax Dual offers original quality as it is provided for in the factory filling by the manufacturers listed. Specifications Audi / VW TL 52529 (G 052 529) Castrol Recommendations Recommended for use in: Ford WSS-M2C-936-A (Dual Clutch), Volvo, Chrysler (Europe), Mitsubishi, Peugeot using Getrag DCT, VW G 052 182; PSA Transmission Oil 9734 52; Dia Queen SSTF-1 VW, Seat, Skoda 6-speed Dual Clutch Transmission (DSG)

The Flottweg Z8E: The Giant Decanter With the new Z8E decanter centrifuge, Flottweg is extending its product range and setting new standards. Right from the start of development of the Z8E, the target was set of concentrating on the specific requirements of an extremely wide range of industries. The modular design of this decanter centrifuge means it is possible to adjust optimally to all kinds of separating tasks. Irrespective of whether two-phase or three-phase separation is involved, Flottweg always has the right machine configuration available with the Z8E decanter centrifuge. Typical Applications of The Flottweg Z8E - Mining and the processing industry - Chemicals and biotechnology - Foodstuffs and beverage industry - Vegetable oils, animal fat and renewable fuels - Wastewater and oil sludges

BlueTronic II 10W-40 (09/01/2022) Engine oil with Aral synthesis technology Description Low-friction engine oil with Aral synthesis technology. Aral BlueTronic II SAE 10W-40 can be used in gasoline and diesel engines (including turbocharged engines) used in cars or light commercial vehicles. Specifications ACEA A3/B4 API SP Meets - Fiat 9.55535-D2 MB Approval 229.3 VW 5 01 01 / 505 00

Low-friction engine oil with Aral synthesis technology. Aral BlueTronic II SAE 10W-40 can be used in gasoline and diesel engines (including turbocharged engines) used in cars or light commercial vehicles. Specifications ACEA A3/B4 API SP Meets - Fiat 9.55535-D2 MB Approval 229.3 VW 5 01 01 / 505 00

Aral HighTronic 5W-40 is a high-performance, low-friction engine oil using Aral synthetic technology. It can be used in many cars with petrol or diesel engines (please note manufacturer specifications). The balanced formulation also meets the high wear protection requirements according to VW 505 01 (pump-nozzle specification). The modern Low Ash technology protects against harmful ash deposits in the diesel particulate filter and thus supports their effectiveness and service life. Specifications ACEA C3 API SN/CF Meets Fiat 9.55535-S2 Meets Ford WSS-M2C917-A GMdexos2™ * MB approval 229.31/ 229.51 Porsche A40 Renault RN 0700 / RN 0710 VW 505 00/ 505 01

Aral MegaTurboral LA 10W-40 is based on the strict requirements of the latest generation of Euro 4.5 and 6 engines with exhaust aftertreatment systems, for which a lubricant with a reduced content of sulfate ash, phosphorus and sulfur (Low SAPS) is prescribed, to ensure safe operation. The formulation enables a maximum reduction in exhaust emissions to comply with Euro 4.5 and 6 limits. Application Aral MegaTurboral LA 10W-40 was developed with special consideration of the requirement profiles for exhaust gas aftertreatment systems, especially when using diesel particle filters in commercial vehicles. Advantages Low SAPS technology optimizes the efficiency of the exhaust gas aftertreatment and thus ensures safe compliance with the legally prescribed Euro 4.5 and 6 limit values. Synthesis technology enables oil change intervals to be extended while taking into account the manufacturer's instructions and reduces maintenance costs and the resulting downtime.

Castrol Axle EPX 90 is a high-pressure gear oil of API class GL-5 for highly loaded hypoid gears and final drives (AP axles). Castrol Axle EPX 90 protects against seizing and wear even under severe operating conditions . The gearboxes remain clean in the long term and are permanently protected against corrosion. Gearboxes lubricated with Castrol Axle EPX 90 offer a high level of functional reliability. Specifications API GL-5 MB release 235.0 ZF - TE-ML 16C, 17B, 19B, 21A

Castrol Transmax Manual EP 80W-90 is a mineral oil-based manual transmission oil of viscosity class SAE 80W-90 for use in transmissions where the API GL-4 requirement is prescribed. Advantages -High temperature stability protects against deposits and oil thickening -High wear protection and good load-carrying capacity leads to extended service life of the transmission components Specifications API GL-4 MAN 341 Type Z2 ZF TE-ML 02B, 17A

Castrol Transmax Manual EP 80W-90 is a mineral oil-based manual transmission oil of viscosity class SAE 80W-90 for use in transmissions where the API GL-4 requirement is prescribed. Advantages -High temperature stability protects against deposits and oil thickening -High wear protection and good load-carrying capacity leads to extended service life of the transmission components Specifications API GL-4 MAN 341 Type Z2 ZF TE-ML 02B, 17A

Castrol Transmax Manual EP 80W-90 is a mineral oil-based manual transmission oil of viscosity class SAE 80W-90 for use in transmissions where the API GL-4 requirement is prescribed. Advantages -High temperature stability protects against deposits and oil thickening -High wear protection and good load-carrying capacity leads to extended service life of the transmission components Specifications API GL-4 MAN 341 Type Z2 ZF TE-ML 02B, 17A

Castrol Transmax Manual Transaxle 75W-90 is a modern, fully synthetic high-performance manual transmission lubricant. Advantages excellent wear protection and shiftability for optimal use in transaxle transmissions - extended transmission service life minimized switching forces under all climatic conditions special protection during cold starts due to low pumping capacity reduced temperature level and excellent transmission cleanliness with extended service life Specifications API GL-4+ VW 501 50 SAE Class according to J306 before 1998

Castrol Transmax Manual Transaxle 75W-90 is a modern, fully synthetic high-performance manual transmission lubricant. Advantages excellent wear protection and shiftability for optimal use in transaxle transmissions - extended transmission service life minimized switching forces under all climatic conditions special protection during cold starts due to low pumping capacity reduced temperature level and excellent transmission cleanliness with extended service life Specifications API GL-4+ VW 501 50 SAE Class according to J306 before 1998

Castrol Transmax Manual Transaxle 75W-90 is a modern, fully synthetic high-performance manual transmission lubricant. Advantages excellent wear protection and shiftability for optimal use in transaxle transmissions - extended transmission service life minimized switching forces under all climatic conditions special protection during cold starts due to low pumping capacity reduced temperature level and excellent transmission cleanliness with extended service life Specifications API GL-4+ VW 501 50 SAE Class according to J306 before 1998

Aral gear oil SNS-AT 75W-90 is a fully synthetic manual transmission oil for commercial vehicles and is particularly suitable for use in Mercedes-Benz of the Actros, Axor and Atego series. Advantages Excellent viscosity - temperature behavior in a wide temperature range Very good wear protection, even under severe operating conditions Excellently good synchronous behavior, especially in MB commercial vehicle transmissions Particularly resistant to aging Specifications API GL-4 MB Approval 235.11

Lithium saponified EP grease with added molybdenum sulfide (MoS 2) Description Aral multi-purpose grease F is a lithium saponified EP grease with added molybdenum disulfite (MoS 2). The addition of MoS 2 results in friction-improving and emergency running properties. Aral multi-purpose grease F has good flexing resistance and very good pressure absorption, aging and corrosion protection properties. Application Aral multi-purpose grease F can be used in highly stressed pin joints, journal bearings, on fifth wheel plates on commercial vehicles, in water or dirt-polluted environments such as in the steel or mining sector, on open sprockets in transmissions or construction machinery.Specifications DIN - 51502 KPF2K-30

can no longer be sold, has expired for 6 years ; Dispose of according to Castrol Specifications/Approvals: High-performance HLP hydraulic oils in accordance with DIN 51524-2 with very good oxidation and wear protection, excellent air and water separation properties and low tendency to foam.

We know the special requirements of the wastewater industry. Flottweg therefore decided to create a new decanter series solely manufactured for sludge separation, called the Flottweg C Series.

Reliability isn't just a keyword for Flottweg – it expresses the company's philosophy. We want our customers to get results with Flottweg that can't be beat. That requires reliable machines, reliable service, and staff whose passion for perfection shows throughout the manufacturing process. The newly developed Flottweg Z2E brings us a huge step towards that goal. This decanter centrifuge is flexible, maintenance-friendly, and powerful. With its easy-to-open cover, Flottweg makes access to the main components quick and easy, with no need for lifting equipment. Together with another feature – the super deep pond – the Flottweg Z2E highlights the know-how that has gone into this decanter. Top flexibility and quality characterize the Flottweg Z2E, which has been Engineered For Your Success.

Lubrication of highly stressed chains, joints or slideways at higher temperatures For conveying systems running beneath radiated heat, in baking and drying lines in the foodstuffs industry Dry lubrication at operating temperatures above 200°C The synthetic oil content evaporates odorlessly without leaving residues, while the solid lubricant content are left behind to carry out dry lubrication Advantages and benefits Highly suitable as a high-temperature lubricant Highly effective due to homogeneous distribution of the finest graphite throughout the oil Versatile application as a liquid lubricant under high temperature conditions Resistant to water, chemicals, fuels, lubricants, and hydraulic oils NSF H1 registered For best results, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610 or OKS 2611 universal cleaner. With a brush, drip oiler or by immersion or using a suitable automatic lubrication system, apply a sufficient quantity

In 2015 the product name was changed. The old product name was Castrol Optimol Paste TA. High temperature assembly paste Description Castrol Molub-Alloy Paste TA (previous product name Castrol Optimol Paste TA) is a paste for screw connections up to +1100 °C. It is used as an assembly paste and prevents sticking, welding and scaling. Molub-Alloy Paste TA ensures good separation and sealing in high-temperature and wet areas as well as in aggressive media. Application Molub-Alloy Paste TA is used as an assembly aid for components at risk of corrosion, temperature and environmental stress, such as screws, bushings, valves, flange and pipe screw connections, form-fitting components, seals, stuffing boxes and packings as well as for metal pairings of light metal against steel. Molub-Alloy Paste TA is used as a base and thin film lubrication for sliding surfaces subject to high thermal loads.

Product properties and areas of application: PINGO - diesel winter additive is a flow improver that significantly increases the ignitability of diesel fuel at low temperatures and prevents paraffin release. PINGO – diesel winter additive, when used in the correct dosage, provides protection against diesel molding down to -26°C

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

In the textile industry, our know-how in weighing, conveying, mixing and dosing liquids and solids finds further areas of application. Areas of application include the provision of impregnates or other refinements of fibres or surfaces. IFA Technology considers your individual requirements and builds customised plants and systems for the textile industry. We supply all types of plants and systems - from standard systems to customer-specific special plants. Our innovative plants and systems for the textile industry support new developments and treatment options for fibres. Application of plants for the textile industry: Storage, mixing and dosing of liquids, for instance impregnations and additives

IFA Technology considers your individual requirements and builds customised plants and systems for the pharmaceutical industry. Pharmaceutical plants and systems from IFA Technology meet the following requirements as standard: Conformity with the regulations of the US Food and Drug Administration (FDA-compliant) Steel construction made of the material 1.4301 (304) Components in contact with the product, such as containers made of the material 1.4404 (316L) or 1.4435 (316L defined delta ferrite content) Tanks and pipes cooled, heated and/or insulated ("chloride-free") Pipe dimensions according to DIN 11866 Aseptic pipe connections as clamp connections according to DIN 32676 Easy assembly and disassembly

IFA Technology supplies customised plants and systems for the food and luxury food industry up to complete turnkey solutions. Reproducibility and accuracy are the hallmarks of our plants and systems in the food industry and the luxury food industry. Another focus is on hygiene and diligence: Plants from IFA Technology are made of high quality stainless steel and use food grade materials and FDA approved (Food and Drug Administration) components. The plant components and their functions are adapted to the necessary requirements of the end customers and fulfil the requirements of the specific certifications.

IFA Technology considers your individual requirements and builds customised plants and systems for the paint industry and the varnish industry. Our plants and systems for dosing liquids and solids in the paint and varnish industry offer high dosing accuracy and perfect reproducibility. We meet the high demands of our customers through the use of high-quality materials and precise workmanship. Application of plants and systems for the paint industry and the varnish industry: Storage, mixing, dosing and application of paints and varnishes Special dosing valves and dosing pumps for paints and varnishes

IFA Technology is represented with numerous reference plants and systems in the automotive industry. We have the necessary flexibility and many years of experience to meet the multitude of requirements and special features of the components fitted in automobiles. IFA Technology offers you effective solutions for various applications. Special control concepts make it possible to comply with the high quality requirements and to implement corresponding test procedures as verification.

Castrol Manual EP SAE 80W is a versatile mineral oil-based high-pressure transmission oil of API class GL-4 for manual and axle transmissions. Advantages high pressure absorption capacity pronounced synchronous properties lasting protection against corrosion good foam resistance neutral sealing behavior optimal wear protection Specifications API GL-4 MB approval 235.1 ZF TE-ML 17A