Results for
ALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
225 gr. spin split glass fibre mat as well as 450 gr. emulsion bound glass fibre mat are offered.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
The mould construction fleece is particularly well tensile and conformable. It is also ideally suitable for complicated parts and moulds. Since this fleece is produced of 100 % polyester fibres, it can be processed with epoxy and polyester resin without any problem. The resin consumption is approx. 1.5 – 2 kg/m² depending on the application. It is ideal for producing free forms.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
Silicone tubes are used for the vacuum channels.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
Steel wires are required for the vacuum channels.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
Copper pipes are used as heating and cooling coils (very soft and, therefore, easy to bend).
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
Aluminium perforated sheets are used in order to reinforce the casting resin moulds.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
Release agent H1 (art. no. 9519000) is used to release patterns and moulds. Release agent H1 is applied in a thin coat with a brush or a soft sponge. After the solvent has evaporated, a release film is formed.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
ALWA release wax (art. no. 9516000) is used to release patterns and moulds. ALWA release wax is applied in a thin coat with a brush or a soft sponge. After the solvent has evaporated, a polishable release film is formed.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
ALWA release spray (art. no. 9515000) is used to release patterns and moulds. After the solvent has evaporated, a strong release film is formed. ALWA release spray may not be polished.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
ALWA release lacquer (art. no. 9510000) is used to release patterns and moulds. ALWA release lacquer is applied in a thin coat with a brush or a sponge. A thin coat of ALWA release lacquer can also be sprayed on with a conventional spray gun. We recommend to spray on approx. 2 to 3 layers. After approx. 20 min. a strong release film is formed. The drying process can be accelerated by hot air.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
Master patterns must be treated with ALWA surface tension remover (art. no. 9500000), so that the ALWA release lacquer does not roll off. ALWA surface tension remover is applied in a thin coat with a brush or a sponge. After approx. 10 min. the solvent is evaporated and ALWA release lacquer can be applied.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
ALWA acryl sealer is used to seal porous surfaces, such as wood, gypsum and rigid foams (not suitable for polystyrene foam). The primer dries in the air and forms a strong film. Apply a thin layer of ALWA acryl sealer evenly with a brush. If 3 % hardener powder is added, the curing process can be reduced to approx. 30 min.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
ALWA plasticine is used to repair master patterns, round off sharp edges, seal casting boxes and build a parting plane.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
ALWA PU foam consists of component A (art. no. 9700005) and component B (art. no. 9701006) and is used, for instance, to produce displacers. The mixing ratio between component A and component B is 1 : 1.2 and the density is approx. 30 kg/m³.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
ALWA repair filler (art. no. 5100001) is used in order to repair casting resin moulds. The filler is mixed with 1 – 3 % hardener powder.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
The solvent combination contains methyl methacrylate (MMA) and is used for diluting and cleaning.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
ALWA MOULD SLV is a universal two-component fast casting PU resin for mould making. It is used for the production of milling devices, negatives, product holders, foundry moulds, mould plates, copy moulds, core boxes, pattern plates, casting moulds, prototype parts, supporting moulds and synthetic cast. It consists of a beige-brown low viscosity resin component A (polyol mixture) and a red-brown, low viscosity hardener (component B) based on isocyanate (Methylendi(phenylisocyanat)e = MDI). Two types are available with different pot life: *ALWA MOULD SLV 3 ~ 3 min. pot life *ALWA MOULD SLV 9 ~ 9 min. pot life
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
ALWA EPF 10 is a temperature-resistant, steel-filled gelcoat based on epoxy resin. It is used to produce temperature and abrasion resistant surfaces for vacuum, PU foam, thermionic moulds and heating plates, among others.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
ALWA BARRIER COAT is a laminate resin, which is applied to protect the gelcoat for instance with glass fleece (e.g., ALWA MOULD COAT and ALWA UP GELCOAT).
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
ALWA UP GELCOAT is an aluminium filled polyester surface resin with a temperature resistance of 110 °C. Pot life is approx. 20 – 30 min. at room temperature, when using 1 – 2 % hardener (art. no. 3150001). The top layer can be polished to high gloss.
Request for a quoteSPIROL
Germany
Moulded-In Inserts are placed over core pins by an operator or a pick-and-place robot prior to the closure of the mould cavity during the plastic injection process. Moulded-In Inserts offer exceptional torque and pull-out resistance due to unrestricted plastic flow around the Insert body, and are often the Insert of choice for thermosets and engineered plastics with a high percentage of filler. The minor thread diameter tolerance is controlled to ensure positive positioning and perpendicularity of the Insert on the core pin during the moulding process. Series 63 is symmetrical eliminating orientation and Series 65 is the same body style in a blind ended version. SPIROL's Moulded-In Inserts are made from 2024 aluminium, a light-weight, lead-free grade. SPIROL’s Series 63 and Series 65 Moulded-In Aluminium Inserts are available in thread sizes ranging from M4 (8-32) up to M8 (5/16-18).
Request for a quoteA.H. LEHMANN BLECHWARENFABRIK GMBH
Germany
With smooth, rolled border: robust design blue-plate 0.70 mm blue-plate with "Proficoat 100"or "Provicoat 300" coated or aluminium 1.2 mm They are qualified for: Fruit Tart- andChese Cake Tins Cake Tin "Classic" Pizza Tins Do you have any special requirements? We can produce virtually any size for you. Simply give us call for further information.
Request for a quoteA.H. LEHMANN BLECHWARENFABRIK GMBH
Germany
Standard-Sizes Diameter 160 - 300 mm in different height. Cake Rings: aluminium, stainless steel, stainless steel adjustable Cake Ringsoctagonal, oval and heard shaped, Florentine Rings "Cobble stone" Glady we supply also special sizes.
Request for a quoteA.H. LEHMANN BLECHWARENFABRIK GMBH
Germany
All tart rings and cutters are made exclusively of stainless steel 1.4301. Small Tart Rings & Cutters: round, hexagon, rhombus, oval, acute-oval shaped
Request for a quoteA.H. LEHMANN BLECHWARENFABRIK GMBH
Germany
Material: sheet steel with silicon coating Proficoat 100 Tins: deep-drawn Sets: with adjacented frame Scallop-edged Cake Tins: "Dom-Cake" "Strong" Scallop-edged Cake Tin Set half round Other special individual tin sizes and frame versions can also be produced for larger order quantities, and provided in case the relevant tooling is available.
Request for a quoteA.H. LEHMANN BLECHWARENFABRIK GMBH
Germany
Madeira Cake Mould Set deep-drawn, Set 5-strap special for madeira cake Easter Egg Mould Set 3 egg moulds suitable for all pastes Plaited Loaf Mould für Hefezopf und Rührkuchen Heart Mould Set 3-strap with convexed bottom Bell Mould Set 3-strap Marguerite Mould decorative flower shaped mould for sponge- and angel cake Stollen Mould oval mould with corrugated border
Request for a quoteA.H. LEHMANN BLECHWARENFABRIK GMBH
Germany
Moulds: Trays for Muffins Trays with raised Moulds for "Mohrenkopf" Trays for small Gugelhopf Moulds with and without tube Trays for Madeleines Trays for Torteletts Trays with hemisphere Moulds Trays for "Twinkies" Trays for "Florentiner" Trays for Little Tarts Trays for Little Ribbed Plaited Loafs Trays for Tartlets
Request for a quoteResults for
Moulds - Import exportNumber of results
113 ProductsCountries
Company type
Category