Motor slides - Import export

The highest accuracy class “Ultra-Precision plus” impresses with an accuracy of 0.0005 mm, thus 0.5 µm. Due to the fact that the control unit of the Föhrenbach slides is compatible with the interfaces of almost all measuring systems, this extraordinary repeatability does not depend on a particular system or a specific provider. Föhrenbach profiled guide slides with integrated linear motor are available in the series PFL (with bellows covers) and PCL (with sheet metal covers). For both series three sizes are available. We developed three resp. two linear motors of different force.

Type MR - roller bearing mounted slide /Typ MS - dovetail slides Positioning accuracy: 0,001 - 0,1 mm according to the spindle used and the feedback system Drive: Stepping or direct-current motors

The profiled guide slide PFS is available in 5 series with sizes from 100 mm up to 425 mm width and strokes up to 2000 mm. To protect them against dirt accumulations, the slides are covered with bellow covers. Other covers on request. The slides are available in aluminium (nature anodized), or casted iron GGK-25. Optional steel C-45. The ball thread spindle drives are available in the qualities T5 and T7 with spindle pitches from 5 to 50 mm. PFS (basic equipment) ball screw spindle acc. to standard type allocation screwed up bellows cover coated on both sides integrated inductive limit switches (PNP break contact) incl. plug-connector in the endplate

The V shape of the shaft support is the result of purposeful internal development work at Föhrenbach. The most important advantage comes from having the greatest possible distance between the shafts and above all in the lay-out of the four ball-bearing housings whose loadbearing rows of balls are located underneath the shaft. The unitized, modular type like design realized with these devices enables to cover a wide range of application specific solutions. Manufactured in standard widths from 75 to 425 mm and in lenghts of up to 4000 mm, the products are designed to provide solutions that allow to cover almost all handling and mounting tasks that need to be met. An experience of long standing assures for competent solutions.

This compact motor valve is used in a wide range of process engineering control tasks. It is particularly characterised by its very short design. Most media such as steam, fluids, gases, etc. can be excellently controlled with it. This inexpensive version represents a real alternative to pneumatic actuators. Position electronics Analog stroke feedback Limit switch Fail safe feature . . .

The compact sliding gate motor valve Type 8230 in reinforced design with on/off and control operation is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be excellently controlled. Using supercapacitor technology, the valve returns to its defined basic position when the power supply fails. This competitively priced version with its metal body is a true alternative to pneumatic actuators. Metal bellows Position electronics Analog stroke feedback Limit switch Fail safe feature . . .

The sliding gate motor valve type 8038 in reinforced design with highresolution fast actuatoris suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be handled precisely. The interaction of highprecision control electronics with the precise stepper motor results in a positioning accuracy of ± 0.2% even with a valve stroke of only 6 mm. By means of supercapacitor technology, in the event of a power supply failure, the valve returns to its defined basic position. Metal bellows Position electronics Analog stroke feedback Limit switch Fail safe feature

The sliding gate motor valve type 8038 with its highresolution fast actuatoris suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be handled precisely. The interaction of highprecision control electronics with the precise stepper motor results in a positioning accuracy of ± 0.2% even with a valve stroke of only 6 mm. By means of supercapacitor technology, in the event of a power supply failure, the valve returns to its defined basic position. Metal bellows Position electronics Analog stroke feedback Limit switch Fail safe feature

The sliding gate motor valve type 8036 in reinforced design is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can perfectly be handled. Metal bellows Position electronics Analog stroke feedback Limit switch Fail safe feature Control actuators or 3point actuators Voltage 230 VAC, 110/120 V AC, 24 VAC, 24 VDC

The sliding gate motor valve type 8036 is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. are easy to handle. Metal bellows Position electronics Analog stroke feedback Limit switch Fail safe feature . . . Control actuators or 3point actuators Voltage 230 VAC, 110/120 V AC, 24 VAC, 24 VDC

The sliding gate motor valve type 8030 in reinforced design is suitable for a wide range of process applicationsis suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can pefectly be controlled with this valve. Metal bellows Position electronics Analog stroke feedback Limit switch Control actuators or 3point actuators Thrust 0.9 kN; 2 kN; 4.5 kN Voltage 230 VAC, 24 VAC, 400 V, 24 VDC

The sliding gate motor valve type 8030 is suitable for a wide range of process applicationsis suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can pefectly be controlled with this valve. Metal bellows Position electronics Analog stroke feedback Limit switch . . . Control actuators or 3point actuators Thrust 0.9 kN; 2 kN; 4.5 kN Voltage 230 VAC, 24 VAC, 400 V, 24 VDC

The reinforced version of the type 8037 sliding gate motor valve is suitable for use in potentially explosive atmospheres in accordance with Directive 94/9EG. Media such as steam, liquids, gases etc. can be excellently controlled with this motor valve, even in hazardous areas. Metal bellows Position electronics Analog stroke feedback Limit switch . . . Ex zones 1, 2, 21 and 22 Protection class I 2G Ex de (ia) IIC T6/T5 or T4 (gas version) Protection class II 2D Ex tD (iaD) A21 IP 66 T80C (dust version)

The sliding gate motor valve type 8037 is suitable for the intended use in potentially explosive atmospheres according to Directive 94/9EG. Media such as steam, liquids, gases etc. can excellently be controlled with this motor valve, even in hazardous areas. Metal bellows Position electronics Analog stroke feedback Limit switch . . .Ex zones 1, 2, 21 and 22 Protection class I 2G Ex de (ia) IIC T6/T5 or T4 (gas version) Protection class II 2D Ex tD (iaD) A21 IP 66 T80C (dust version)

The reinforced version of the type 8035 sliding gate motor valve features a failsafe mechanical spring return. It is ideal where mechanical failsafe options are contained within the specification, e.g. steam and district heating systems. Metal bellows Position electronics Analog stroke feedback Limit switch Fail safe feature Control actuators or 3point actuators Thrust 1.2 kN; 3 kN Voltage 230 V AC, 24 V AC, 110/120 V AC

The sliding gate motor valve type 8035 features a failsafe mechanical spring return. It is ideal where mechanical failsafe options are contained within the specification, e.g. steam and district heating systems. Metal bellows Position electronics Analog stroke feedback Limit switch Fail safe feature . . . Control actuators or 3point actuators Thrust 1.2 kN; 3 kN Voltage 230 V AC, 24 V AC, 110/120 V AC

Until a vehicle gets road-permission, a number of measurement taske have to be fulfilled along the development chain. During vehicle testing in extreme conditions – in prototyping and pilot series e.g. – MicroControl systems offer the necessary performance and often are an efficient alternative to expensive measurement technology. A variety of different measurement spots in a car can be realized as well as modular test facilities for motors using the 19″ slide-in units.

Gronemeyer lane bridging increases the accessibility of the various machines in a filling and packaging line. The gripper technology permits space-saving bridging of roads or pedestrian walks. Even large spans can be realised. Technical data: —Conveyor performance: up to 60,000 units/h —Crossing width: up to 6 m —Crossing height: up to 3 m —Product weight: up to 40 kg —Product width: 20 - 450 mm —Solid steel construction in painted or stainless-steel version —Manual width adjustment —Automatic tensioning station for the cleated chain —Central lubrication system for the cleated chain Optional equipment: —Moving deflecting pulleys in the curves to reduce wear on chains and slide rails —Motorized width adjustment —Complete machine cover made of Makrolon or steel grid with maintenance doors —Independent electrical control system with congestion monitoring —Loading and unloading belts