Metal separators - Import export

CMC TEXPAN oers several solutions for the removal of metal (ferrous and non-ferrous) contaminants, based on dierent principles of operation, hence suitable for various applications. magnetic drum The machine consists of a rotating drum made of stainless steel

- detects and separates any type of metal, loose or encapsulated - flexible integration into existing conveying systems independent of direction, quick and cost-effective -easy to operate - high-precision metal detection, extremely reliable - uncompromising safety, thanks to mesuSafetyPack

metal separator was developed for the examination of plastic granulates, ground material and powders for metallic foreign bodies. It is used in the injection molding and extrusion areas for slow-flowing material columns. Both the detector and the ejection unit have been specially developed for this area of use. This results in top performance data for precision, operating reliability and ease of cleaning. Failsafe storage of all system parameters Digital signal processing for best detection Process- and condition monitoring Standardised system for a wide area of use Robust construction for maximum lifetime Highest precision in long-term operation Fast ejector for minimized material loss Dismantle without tools All components are easily accessible

METAL SEPARATOR FOR SUCTION AND PRESSURE LINES, COMPLYING TO STRICTEST HYGIENE REQUIREMENTS Detects and separates all metals encapsulated or as loose parts. Extremely precise metal detection – impressively reliable. Immune against outside interference. The suitable unit for all bulk materials (granulates/powders).

METAL SEPARATOR FOR EXAMINATION OF BULK MATERIALS IN FREE FALL. Detects and separates all metals encapsulated or as loose parts. Extremely precise metal detection – impressively reliable. Durable and solid – a profitable investment. ATEX conforming versions available. Compact, easily integrated.

METAL SEPARATOR FOR THE INSPECTION OF GRANULES AND FLAKES IN FREE FALL Detects and separates all metals as entrapments or loose parts Outstanding Price / performance ratio Ideal s tandard solution for regrind quality assurance and machine protection Compact and easy to integrate

Metal separator for the examination of free falling bulk materials, fulfilling even most stringent hygiene requirements. Detects all metals encapsulated or as loose parts Extremely precise metal detection – impressively reliable Immune against outside interference Easy to clean – fulfils the highest hygienic demands Compact, easily integrated

Metal separator for installation in liquid conveying lines to inspect fluid as well as pasty products like baby food. The hygienic 3-way separating valve without dead space is suitable for CIP and optional pigging cleaning procedures. Versions for aggressive products, aseptic filling or high temperatures are available on request.

RESEPARATION SYSTEM INCLUDING CONVEYING, DOSING AND SEPARATOR UNIT • Metal separator QUICKTRON 03 R for reliable detection results • Adjustable vibratory dosing conveyor for regulating throughput • Hopper loader with suction lance for independent operation • Standardized system to fit industrial barrels or big-bags for material storage

METAL SEPARATOR FOR THE PHARMACEUTICAL INDUSTRY FOR THE INSPECTION OF TABLETS AND CAPSULES. Detects and separates all metals encapsulated or as loose parts. Meets the highest h ygiene requirements. Fast decontamination of all product touching parts without tools. Fits every tablet press and deduster installation. High throughput owing to round equipment design DN50.

METAL SEPARATOR FOR THE COMBINATION WITH VACUUM FILLERS TO EXAMINE LIQUID / PASTY FOOD PRODUCTS. Detects and separates all metals as inclusions or as loose parts. Can be connected to all commercial vacuum fillers. Time-saving cleaning in few steps without tools. High pressure cleaning resistant.

Metal separator for the inspection of film flakes in free fall. Fully automatic detection and safe separa tion without interrupting production. Detection of all metal particles encapsulate3d or as loose parts. Control electronics with clearly arranged Buttons for easy implementing and operation. Dual flat ejector an big aperture sizes safely avoid blockades, even with very light weight products.

A motor actuator with the performance of a pneumatic actuator • Very high resolution (dead band ± 0.2%) • High positioning speed (up to 0.75 s / mm) • Actuating forces up to 5 kN and stroke dependent limit switches • Smooth start and slow down • Robust aluminum housing and metal gears • Separate terminal and easy adaptation • Multiple options for adjustment and diagnostics • Fail safe feature available • Ingress protection IP67

METAL DETECTOR FOR THE INSTALLATION IN PNEUMATIC CONVEYING LINES Detects and separates all metals encapsulated or as loose parts. Extremely precise metal detection – impressively reliable. Immune against external interference. Special version for abrasive granules or hazardous areas available

Lubrication of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements, for example with screwed, mating or bayonet connections made of high-alloy steel or non-ferrous metals Surface separation of temperature-stressed threaded connections, for example at combustion engines and turbines Corrosion protection at screws, pins, bolts, flanges, spindles and fits For stainless-steel connections Advantages and benefits Economic product solution for users who previously used a wide variety of pastes Resistant to hot and cold water and also to most acids and lyes Excellent corrosion protection Contains Moₓ-Active for increased performance Metal-free Also available as spray version OKS 2501 NSF H2 registered To achieve optimal adhesion remove soiling as well as other lubricants from the thread and sliding surfaces. Use a brush, spatula or similar to apply sufficient OKS 250

plunger Ø 40 mm, stroke 18 mm extending hydraulically contact by spring force separate locking port metallic wiper edge pipe thread G1/4 max. 500 bar, as per data sheet B1.911

Design: Frame structure made of anodized special light metal-profiles, side walls and separating walls made of melamin resin laminated panels, completely surrounded by U-profile.Rear- and front side open. Tray supports made of chromium plated tubular material. Mounted on 4 corrosion protected, ball bearing castors with distance holding bumpers, 2 of them lockable. With acrylic glass doors (completely faced with melamine panels).

Lubrication of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements, for example with screwed, mating or bayonet connections made of high-alloy steel or non-ferrous metals Surface separation of temperature-stressed threaded connections, for example at combustion engines and turbines Corrosion protection at screws, pins, bolts, flanges, spindles and fits For stainless-steel connections Advantages and benefits Economic product solution for users who previously used a wide variety of pastes Resistant to hot and cold water and also to most acids and lyes Excellent corrosion protection Contains Moₓ-Active for increased performance Metal-free Also available as spray version OKS 2501

The output shaft of the HSH swivel motors has radial and axial hydrostatic bearings. Here, radially and axially arranged bearing pockets are supplied with pressurized oil via a separate pressure connection. As a result, the output shaft is centered radially and axially between liquid cushions and all metallic contact surfaces are permanently separated from each other by a thin liquid film. This eliminates wear caused by metallic friction in any operating state, even at zero speed compared to hydrodynamic plain bearings. In conjunction with highly dynamic control valves and angle of rotation sensors, these actuators are preferably used in controlled systems in which disturbance variables such as friction and the stick-slip effect must be reduced to a minimum. Furthermore, due to the lack of internal seals, they are ideal for test series with large numbers of load cycles where an interruption, e.g. due to the replacement of internal seals, is not permitted.

The output shaft of the HSH swivel motors has radial and axial hydrostatic bearings. Here, radially and axially arranged bearing pockets are supplied with pressurized oil via a separate pressure connection. As a result, the output shaft is centered radially and axially between liquid cushions and all metallic contact surfaces are permanently separated from each other by a thin liquid film. This eliminates wear caused by metallic friction in any operating state, even at zero speed compared to hydrodynamic plain bearings. In conjunction with highly dynamic control valves and angle of rotation sensors, these actuators are preferably used in controlled systems in which disturbance variables such as friction and the stick-slip effect must be reduced to a minimum. Furthermore, due to the lack of internal seals, they are ideal for test series with large numbers of load cycles where an interruption, e.g. due to the replacement of internal seals, is not permitted.

The output shaft of the HSH swivel motors has radial and axial hydrostatic bearings. Here, radially and axially arranged bearing pockets are supplied with pressurized oil via a separate pressure connection. As a result, the output shaft is centered radially and axially between liquid cushions and all metallic contact surfaces are permanently separated from each other by a thin liquid film. This eliminates wear caused by metallic friction in any operating state, even at zero speed compared to hydrodynamic plain bearings. In conjunction with highly dynamic control valves and angle of rotation sensors, these actuators are preferably used in controlled systems in which disturbance variables such as friction and the stick-slip effect must be reduced to a minimum. Furthermore, due to the lack of internal seals, they are ideal for test series with large numbers of load cycles where an interruption, e.g. due to the replacement of internal seals, is not permitted.

The output shaft of the HSH swivel motors has radial and axial hydrostatic bearings. Here, radially and axially arranged bearing pockets are supplied with pressurized oil via a separate pressure connection. As a result, the output shaft is centered radially and axially between liquid cushions and all metallic contact surfaces are permanently separated from each other by a thin liquid film. This eliminates wear caused by metallic friction in any operating state, even at zero speed compared to hydrodynamic plain bearings. In conjunction with highly dynamic control valves and angle of rotation sensors, these actuators are preferably used in controlled systems in which disturbance variables such as friction and the stick-slip effect must be reduced to a minimum. Furthermore, due to the lack of internal seals, they are ideal for test series with large numbers of load cycles where an interruption, e.g. due to the replacement of internal seals, is not permitted.

The output shaft of the HSH swivel motors has radial and axial hydrostatic bearings. Here, radially and axially arranged bearing pockets are supplied with pressurized oil via a separate pressure connection. As a result, the output shaft is centered radially and axially between liquid cushions and all metallic contact surfaces are permanently separated from each other by a thin liquid film. This eliminates wear caused by metallic friction in any operating state, even at zero speed compared to hydrodynamic plain bearings. In conjunction with highly dynamic control valves and angle of rotation sensors, these actuators are preferably used in controlled systems in which disturbance variables such as friction and the stick-slip effect must be reduced to a minimum. Furthermore, due to the lack of internal seals, they are ideal for test series with large numbers of load cycles where an interruption, e.g. due to the replacement of internal seals, is not permitted.

The output shaft of the HSH swivel motors has radial and axial hydrostatic bearings. Here, radially and axially arranged bearing pockets are supplied with pressurized oil via a separate pressure connection. As a result, the output shaft is centered radially and axially between liquid cushions and all metallic contact surfaces are permanently separated from each other by a thin liquid film. This eliminates wear caused by metallic friction in any operating state, even at zero speed compared to hydrodynamic plain bearings. In conjunction with highly dynamic control valves and angle of rotation sensors, these actuators are preferably used in controlled systems in which disturbance variables such as friction and the stick-slip effect must be reduced to a minimum. Furthermore, due to the lack of internal seals, they are ideal for test series with large numbers of load cycles where an interruption, e.g. due to the replacement of internal seals, is not permitted.

The output shaft of the HSH swivel motors has radial and axial hydrostatic bearings. Here, radially and axially arranged bearing pockets are supplied with pressurized oil via a separate pressure connection. As a result, the output shaft is centered radially and axially between liquid cushions and all metallic contact surfaces are permanently separated from each other by a thin liquid film. This eliminates wear caused by metallic friction in any operating state, even at zero speed compared to hydrodynamic plain bearings. In conjunction with highly dynamic control valves and angle of rotation sensors, these actuators are preferably used in controlled systems in which disturbance variables such as friction and the stick-slip effect must be reduced to a minimum. Furthermore, due to the lack of internal seals, they are ideal for test series with large numbers of load cycles where an interruption, e.g. due to the replacement of internal seals, is not permitted.

Robust, double-walled storage tank made of polyethylene, UV resistant, for outdoor use. max. filling capacity 5000 l; wall thickness approx. 9 mm (inside); anti-leakage warranty 10 years. (incl. pump and accessories) Equipment/accessories: - Self-priming vane pump Panther 72, 230 V. - Diesel filter in metal housing, with water separator - Mechanical counter K33 - Lockable dispensing cabinet with double lock - Wireless level sensor, connected to the monitoring system (leakage indicator) in the interstitial space - Filling hose 1 length 6 m. with automat. A60 nozzle - Lockable filler cap - 16 Service hatch on the outer wall enables tank cleaning to be carried out - Tank vent on the filling lid - Lighting of the dispenser - Electronic overfill protection Dimensions approx. W 2.38 m x H 2.03 m x L 2.95 m Weight (incl. pump equipment) approx. 380 kg Optional: Filling line with overfill protection and tank truck connection Art.

Recovery of acids and acidic rinse waters Additionally to the pickling bath treatment by microfiltration and ultrafiltration, the recovery of acid becomes more and more important. Additionally to sulphuric and hydrochloric acid, also mixed acids (HF / HNO3) can be recovered. The first step of the acid recovery is mostly a sludge separation by microfiltration. Downstream, diffusion dialysis, electrodialysis or nanofiltration is used for metal separation. For the treatment of rinse waters, OSMO Membrane Systems GmbH offers reverse osmosis or electrodialysis plants.

Metal separators from motan can be installed at various locations in a production and for multiple applications. The metal separators prevent damage to your processing machine, tooling and end-products

For stationary hackers, we offer flexible and rigid discharging systems. With both systems we assume the material directly in the hacker and convey it to the desired discharge point. The transport takes place without any pressure. Due to our compact design you do not need ground indentations. Depending on the intended use, our rigid or flexible spirals will be fitted in. These systems could be combined with modules like magnetic separators or interim outlets.