Measurements - Import export

The key to the successful optimisation of compressed-air systems is data. The METPOINT® range of measurement equipment with sensor technology and monitoring provides the data base for the evaluation and assurance of the compressed-air quality and for the identification of hidden cost drivers. Our measurement equipment can also be employed for the extension of plants and for the early elimination of malfunctions. With our sensor technology, you can capture residual oil content, residual humidity, volume flow and pressure – constantly, faultlessly and with exemplary precision. Our Monitoring and Data Logging makes all the relevant data accessible to you and your employees at a glance, ensuring the safety of your processes and the quality of your products. In this way you can take your energy management and quality control requirements to the next level of success.

Low-noise coaxial measuring cables are used wherever the smallest voltages or charges have to be reliably measured, e.g. in pH measurement technology or nuclear research. The method was developed by bda connectivity and ensures reproducible results. Depending on the requirements, these cables can be supplemented with supply or power supply wires as well as additional shields.

Low-noise coaxial measuring cables are used wherever the smallest voltages or charges have to be reliably measured, e.g. in pH measurement technology or nuclear research. The method was developed by bda connectivity and ensures reproducible results. Depending on the requirements, these cables can be supplemented with supply or power supply wires as well as additional shields.

Low-noise coaxial measuring cables are used wherever the smallest voltages or charges have to be reliably measured, e.g. in pH measurement technology or nuclear research. The method was developed by bda connectivity and ensures reproducible results. Depending on the requirements, these cables can be supplemented with supply or power supply wires as well as additional shields.

Low-noise coaxial measuring cables are used wherever the smallest voltages or charges have to be reliably measured, e.g. in pH measurement technology or nuclear research. The method was developed by bda connectivity and ensures reproducible results. Depending on the requirements, these cables can be supplemented with supply or power supply wires as well as additional shields.

In these training courses, we teach the basics of the various measurement techniques, the selection and use of suitable measuring instruments as well as the evaluation of measurement data. The following topics are taught in concrete terms: Fundamentals and concepts of measurement technology; measurands and units; Traceability; Technologies; Signal conversion and digitalization; Selection and use of suitable measuring instruments. In addition to the general overview training, we also offer specific training courses on measurement technology for the following measurands: Temperature; Pressure; Flow (volume and mass flow); Force and elongation; Distance and velocity; Oscillation. By arrangement, you can design the training according to your wishes! We are happy to respond to your individual questions and concerns. Since we regularly expand our training portfolio, please contact us if the metric you are looking for is not listed.

Low load hardness tester from 1 g to 2 kg Vickers or Knoop diamond indentor manual, semi- or fully-automatic

Digital built-in instrument for torque display 96 x 48 mm (B x H) optional: - Relais output - RS 232 interface - Analog output for active torquesensors The instruments PU5 are very versatile. They come standard with a 24-bit resolution, a measurement rate of 50 readings / s, a MIN / MAX memory, a 30 point linearization and an optical switch point indicator. Optionally, the instruments can be equipped with 4 free scalable setpoints, an analog output and a serial interface. They are 5 digits and is available in size 96x48. The sensor is supplied externally by a separate component.

stable iron cast stand with coarse dovetail drive and motorized autofocus axis video system with high resolution camera, integrated incident illumination X/Y stage and downholder pneumatic ultra high-precision jaw chuck self developed imaging software with customer specific application program

Single or multiple specimen can be scanned in special holders (accessory) with low magnification. Various indentation patterns can be graphically defined within the stiched image after the scan by mouse. The testing results can be shown as color chart in the graphic.

We offer the service for HGL hardware and software in Germany, Austria, and Switzerland. Together, we can work out your needs and create an attractive service package. From billing for individual hours to complete packages that include regular upgrades of hardware and software, a lot is possible. We would be happy to provide you with an individually tailored service package.

Do you own a measuring device from HGL Dynamics and want to use it to obtain reliable measured values in the future? In this case, calibration is essential. We will advise you on the selection of the right calibration method for your amplifier. In addition, we also offer a factory calibration of your HGL measuring devices according to your specifications. All calibration references we use are traceable to national and international standards. We will be happy to prepare a suitable offer for this.

We design this training according to your wishes: For newcomers, we offer basic seminars on dynamic data acquisition. It doesn't matter whether you already have a measuring system or want to procure one first. We explain the basics of the most common sensors used in dynamic measurement technology, explain the general functionality of dynamic measuring systems and show, using the example of HGL hardware and software, how a dynamic measurement task can be prepared, carried out and evaluated. If you already have measurement technology from HGL, we offer you further courses to further deepen and optimize the handling of hardware and software. Here we focus entirely on your needs. We can provide an in-depth overview of the various hardware or software components or concentrate on individual aspects and deepen them.

— dustproof closed compact device — is suitable for all free-flowing, free-flowing bulk goods — compact design saves space More Options: — explosion-proof design Power range 2000 - 4000 dm³/h 3000 - 100000 dm³/h 10000 - 160000 dm³/h

Quality engineering With the most modern measuring equipment, release parts are checked and the measurements accompanying the production are carried out. Tactile measuring devices such as calipers, micrometers and dial gauges, measuring projectors and digital measuring technology are also used. All measuring equipment is subject to the annual measuring equipment monitoring - standard for us as a 9001-certified company. Our equipment is also available for you in case of contract measurement. Extract from the measuring equipment list: • Keyence IM 6125 backlight projector • Keyence VHX measuring microscope • Mitutoyo PV 5000 measuring projector • Outside micrometer 0-25mm with electr. digital display • Mitutoyo digimatic caliper ...

• from high quality plastics • for all common spirits • for 0,7 - 1,0l bottles • not anise-resistant • Note: measure pourers only function flawlessly with unsweetened spirits

CERTO Highlights: - High degree of protection - Compact design - Ball-bearing guide High degree of protection - Protection up to IP67 Compact design - Station width of 13 mm Ball-bearing guide - Ball-bearing guide with low friction - High-precision measuring loop - Rugged design Length gauges from HEIDENHAIN provide high accuracy over the entire measuring range, are mechanically robust, and can be used in a great variety of applications. They can be deployed in a wide range of applications: They are well-suited for production metrology, multipoint inspection stations, measuring equipment monitoring, and for use as position measuring devices.

METRO highlights: - High accuracy - High repeatability - Various gauging force variants - Long measuring ranges of up to 100 mm High accuracy - System accuracy of ±0.2 µm High repeatability - Repeatability is typically < 0.03 µm for a measuring range of 12 mm ZERODUR scale - Scale expansion is close to 0 ppm/K at between 0 °C and 50 °C Actuation by cable-type lifter - Defined velocity of the plunger - No counting errors - Precision mechanics - Ball-bearing guide with low friction - High-precision measuring loop Length gauges from HEIDENHAIN provide high accuracy over the entire measuring range, are mechanically robust, and can be used in a great variety of applications. They can be deployed in a wide range of applications: They are well-suited for production metrology, multipoint inspection stations, measuring equipment monitoring, and for use as position measuring devices.

ACANTO Highlights: - Absolute measuring method - Protection up to IP67 - Online diagnostics - Serial data transmission with CRC Absolute measuring method - Position value is available immediately after switch-on - No counting errors - No reference runs necessary, because the measured value is always available Compact design - Station width of 15 mm EnDat 2.2 interface - Additional data on the status of the length gauge is available (diagnostics, warnings, alarms) - Serial data transmission with CRC Length gauges from HEIDENHAIN provide high accuracy over the entire measuring range, are mechanically robust, and can be used in a great variety of applications. They can be deployed in a wide range of applications: They are well-suited for production metrology, multipoint inspection stations, measuring equipment monitoring, and for use as position measuring devices.

HEIDENHAIN angle encoders with integral bearing are characterized in particular by very high system accuracy. The integral bearing in the encoders eliminates any effect on measuring accuracy from the bearing of the machine components. The integrated stator coupling in the RCN/RON/ECN series encoders guarantees lowest possible error from the effect of tolerances in the shaft coupling. All angle encoders with integral bearings feature shaft seals that ensure resistance to contamination (IP64 protection). These encoders enjoy an entire spectrum of possible applications in machine tools, measuring machines, telescopes, printing machines and many other areas. Absolute measuring method Hollow shaft diameter (up to 50 mm) Integrated stator coupling Simple installation Typical field of application: Rotational axes with reduced accuracy requirements

HEIDENHAIN angle encoders with integral bearing are characterized in particular by very high system accuracy. The integral bearing in the encoders eliminates any effect on measuring accuracy from the bearing of the machine components. The integrated stator coupling in the RCN/RON/ECN series encoders guarantees lowest possible error from the effect of tolerances in the shaft coupling. All angle encoders with integral bearings feature shaft seals that ensure resistance to contamination (IP64 protection). These encoders enjoy an entire spectrum of possible applications in machine tools, measuring machines, telescopes, printing machines and many other areas. Incremental measuring method Large hollow shaft diameter (up to 60 mm) Integrated stator coupling Compact size for limited installation space System accuracy includes the deviation caused by the shaft connection Outstanding dynamic response Simple installation Typical field of application: Rotary tables Swivel heads

The angle encoders without integral bearing (modular angle encoders) are intended for integration in machine elements or apparatuses. They are suited for the following requirements: — Large hollow shaft diameter (up to 10 m with a scale tape) — High shaft speeds up to 20000 rpm — No additional starting torque from shaft seals Angle encoders with graduation on glass disk Field of application: High-resolution rotary axes with high reproducibility — Very high number of signal periods — Small mounting space — Small interpolation error and low signal noise — Segment solutions

The angle encoders without integral bearing (modular angle encoders) are intended for integration in machine elements or apparatuses. They are suited for the following requirements: — Large hollow shaft diameter (up to 10 m with a scale tape) — High shaft speeds up to 20000 rpm — No additional starting torque from shaft seals — Segment solutions Field of application: High-resolution rotary axes with high reproducibility — Very high number of signal periods — Small mounting space — Small interpolation error and low signal noise

The MR-21 measuring wheel has a quality counter that accurately records distances in the running direction and in the opposite direction. The run rubber is ground at exactly 318.5 mm diameter with a convenient zero-setting lever next to the counter.The MR-21has a maximum accuracy of 0.02 percentand is certified with a test label. The frame of the measuring wheel is welded by robot to ensure consistent quality over time, and the device also includes an auxiliary arm and an integrated brake. In addition, the quality indicator is "made in Germany" and is conveniently located over the running wheel for easy reading. The folding guide rod is aluminum and the device is equipped with a spoke wheel.

Pressure sensor for analogue filling level measurement Especially suitable for STRATE sewage pumping stations for municipal applications Supply voltage 24 V DC Output of an analogue measuring signal 4 – 20 mA Pressure ranges depending on tank height 0 – 200 or 0 – 400 mbar Safe at several times over-pressure Explosion protection according to ATEX

We would be happy to check the dimensional accuracy of your components in-house. LT Ultra-Precision Technology has a large number of high-precision measuring devices in precisely air-conditioned measuring laboratories for testing its own products, on which we also carry out contract measurements.The following measurement technology is available:High-precision coordinate measuring technology.Interferometric shape measurement technology for plane surfaces, spheres and aspheres.Roughness measurement technology via white light interferometer (WLI) or atomic force microscope (AFM).Reflections- and Transmissionsmessung.Ellipsometrie.Polarimetrie

Redundant twin measuring system where there is a requirement for increased operational safety for sewage pumping stations (e.g. main pumping station) in building service engineering and for municipal applications. Product features The twin measuring system MWAS-BN uses two mutually independent measuring systems which work in different ways. The analogue sensor AS for integration in the pump control unit is combined with the pneumatic-mechanical contact sensor system MB. If one of the two measuring systems fails, emergency control is automatically triggered by the other measuring system.

Magnetic-inductive flow measurement allows the precise measurement of electrically conductive liquids such as sewage. Standard measuring values are the current flow and the accumulated pumping capacity (e.g. daily volume). The measuring signals are available either as 4 – 20 mA or impulse signals and can be transmitted to the data recorder for state recording and diagnosis or to the AWAcontrol control technology for pump control. Magnetic-inductive flow meters are reliable and economic compact units or installation in the pressure line and are available in two basic versions: Sensors for pipe installation with integrated measuring transducer and on-site display as a compact unit Sensors for pipe installation with separate measuring transducer. With this version, the measuring transducer can be located separately on the wall in the service building or as a fitted housing directly in the AWAcontrol control cabinet.