Measurement cables - Import export

Low-noise coaxial measuring cables are used wherever the smallest voltages or charges have to be reliably measured, e.g. in pH measurement technology or nuclear research. The method was developed by bda connectivity and ensures reproducible results. Depending on the requirements, these cables can be supplemented with supply or power supply wires as well as additional shields.

Low-noise coaxial measuring cables are used wherever the smallest voltages or charges have to be reliably measured, e.g. in pH measurement technology or nuclear research. The method was developed by bda connectivity and ensures reproducible results. Depending on the requirements, these cables can be supplemented with supply or power supply wires as well as additional shields.

Low-noise coaxial measuring cables are used wherever the smallest voltages or charges have to be reliably measured, e.g. in pH measurement technology or nuclear research. The method was developed by bda connectivity and ensures reproducible results. Depending on the requirements, these cables can be supplemented with supply or power supply wires as well as additional shields.

Low-noise coaxial measuring cables are used wherever the smallest voltages or charges have to be reliably measured, e.g. in pH measurement technology or nuclear research. The method was developed by bda connectivity and ensures reproducible results. Depending on the requirements, these cables can be supplemented with supply or power supply wires as well as additional shields.

Low-noise coaxial measuring cables are used wherever the smallest voltages or charges have to be reliably measured, e.g. in pH measurement technology or nuclear research. The method was developed by bda connectivity and ensures reproducible results. Depending on the requirements, these cables can be supplemented with supply or power supply wires as well as additional shields.

The only way to avoid material loss is to avoid measuring tolerances. Our MESSBOI 10 product range convinces by it's simple handling of smaller cable diameters.

The only way to avoid material loss is to avoid measuring tolerances. Our MESSBOI 10 product range convinces by it's simple handling of smaller cable diameters.

The only way to avoid material loss is to avoid measuring tolerances. Our MESSBOI 10 product range convinces by it's simple handling of smaller cable diameters.

The only way to avoid material loss is to avoid measuring tolerances. Our MESSBOI 10 product range convinces by it's simple handling of smaller cable diameters.

MESSBOI 30 is a variable solution as it can be used stationary as well as mobile. Simply loosen the screws and remove the measuring unit from its base.

Software ProCable - CAQ-System customized for cable producer requirements With the CAQ-system ProCable test plans can be developped, orders administrated and the recieved test results can be archived with corresponding additional information into the data bases. ProCable generates a list of results from the measurements according to the applied test plans. Afterwards the test results are deposited structured and accurately. ProCable adapt achieve test results with the test plans. Possible exceeding of tolerance limits will be told on the user at once. The user can be repeating the measurement or will be forced to comment the exceptional circumstances.

Software details: ▪ Interface for connecting external CAQ-systems (e.g. CIQ by AESA) ▪ Import, interpretation and evaluation of external test plans ▪ Result evaluation (traffic light system) with export function to external CAQ systems possible ▪ Customized measuring programs for the current cable types are available on clearly recognizable buttons ▪ Clear and simple quick-test perfectly suitable for production ▪ Optimized for the touch screen operation of the VisioCablePro® X5 measuring devices ▪ Easily adaptable for various applications ▪ User-specific button symbols (cable pictures) simplify the operation System requirements: ▪ Windows VISTA, Windows 7, Windows 8.x, Windows 10, (.NetFramework 4.5) ▪ RAM: 2 GB ▪ Hard drive space: 5 GB

Often, special requirements cannot be standardized. For this reason, we configure our sensors to your individual requirements. Modifications of the offset distance or measuring range, cable and connector variants and modifications to the housing and optical system are often required.

Application examples are often found where the standard versions of the sensors and the controller are performing at their limits. For these special tasks, the measurement systems can be modified according to the customer’s individual requirements. Changes requested include, for example, modified designs, target calibration, mounting options, individual cable lengths, modified measuring ranges or sensors with integrated controller.

The CoMeT system is used to measure the screening effectiveness (transfer impedance, screening attenuation and coupling attenuation) of coaxial and symmetrical cables, connectors, bushings, distribution components, etc. The original CoMeT (Coupling Measuring Tube) has grown into a complete system. In principle, a cable measuring station consists of the following basic components: In addition to differently dimensioned round tube systems for cables and connectors, there are also so-called “triaxial cells” that provide a larger measuring chamber volume for parts that do not fit into one of the tubes due to their geometry (sockets, distributors, etc.).

We offer you standardised complete systems for the measurement of volume & mass flows. The EP LMF®-LaminarMasterFlow® is a complete system for high-precision flow measurement of gases and air. The LMF® system consists of a flow processor, a Laminar Flow Element (LFE) as measuring section, a cable set and a sensor package. The flow measurement is performed by means of Laminar Flow Elements (LFE), which are available in different sizes and cover a measuring range from 0.01 to 700 m³/h. (optionally up to 4000 m³/h).

Stainless-steel stick-in sensor, thermocouple. Compact and robust design. Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly in protection tube. Sensor elements: type K o type J thermocouple. Available in various immersion depths. Straight cable outlet. Available in various cable lengths. Increased measuring range up to 800°C. Approval: BV, DNV-GL, LR

Stainless-steel stick-in sensor, Pt100, thermocouple. Compact and robust design. Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly via compression fitting. Pt100 measuring element or type K or type J thermocouple; two thermocouples per sensor or two Pt100 measuring elements available as an option. Available in various immersion depths. 90° cable outlet. Increased measuring range up to 800 °C. Available in various cable lengths. Approvals: DNV-GL, LR

The linear movement of a flexible steel cable up to 2m long is converted into a rotary movement by a measuring drum. A return spring prevents the steel cable from sagging. The measuring drum is connected to a pulse generator, which generates two pulses every 0.1 mm offset by 90°. The measuring drum winds the steel cable in a single layer so that the resolution is independent of the position. The rope entry is protected against dirt by brushes.

Please note that this product is an accessory. In the "Products" section you will find the corresponding encoders that you can order for your selected article. The linear movement of a 2000 mm long, flexible high strength steel measuring cable is converted into a rotational movement by a measuring drum. The measuring drum, which has a circumference of 102.4 mm, is coupled to the shaft of the encoder. A change of displacement in the measuring cable then corresponds to a change in angle on the shaft of the angle encoder. The restoring force of a spiral spring holds the measuring cable tight and prevents errors due to slackness. The cable is wound with adjacent turns in a reproducible manner on the drum due to the movement of the drum on a spindle.

Please note that this product is an accessory. In the "Products" section you will find the corresponding encoders that you can order for your selected article. The linear movement of a flexible steel cable, which can have a length of up to 3 m, is converted into an rotary movement with the aid of a measuring drum. The measuring drum is connected to the shaft of an encoder. In this way a change in displacement of the measuring cable causes the shaft of the encoder to rotate by a directly proportional amount which can be recorded. The restoring force of the spring drive holds the measuring cable tight at all times and prevents any sagging which would otherwise induce an error. The cable is wound up precisely and reproducibly wrap for wrap in the helical groove of the drum. The nozzle, through which the cable enters the drum, is protected with a brush and a bellow to prevent water or dust entering the drum.

The linear movement of a flexible steel cable, which can have a length of up to 2 m, is converted into an angular movement with the aid of a measuring drum. The measuring drum is coupled via a gear to a conductive plastic potentiometer. The restoring force of the spring drive holds the measuring cable tight at all times and prevents any sagging which would otherwise induce an error. The measuring drum moves axially on a spindle ensuring that the cable is wound up precisely and reproducibly wrap for wrap in the helical groove of the drum. The cable entry contains a brush to remove dust.

Please note that this product is an accessory. In the "Products" section you will find the corresponding encoders that you can order for your selected article.The linear movement of a flexible steel cable, which can have a length of up to 5 m, is converted into an rotary movement with the aid of a measuring drum. The measuring drum is connected to the shaft of an encoder. In this way a change in displacement of the measuring cable causes the shaft of the encoder to rotate by a directly proportional amount which can be recorded. The restoring force of the spring drive holds the measuring cable tight at all times and prevents any sagging which would otherwise induce an error. The cable is wound up precisely and reproducibly wrap for wrap in the helical groove of the drum. The nozzle, through which the cable enters the drum, is protected with a brush and a bellow to prevent water or dust entering the drum. Two roller units at the cable entry allow for up to 20° <) deflection of the cable.

Please note that this product is an accessory. In the "Products" section you will find the corresponding encoders that you can order for your selected article. The linear movement of a flexible steel cable, which can have a length of up to 40 m, is converted into an rotary movement with the aid of a measuring drum. The measuring drum is connected to the shaft of an encoder. In this way a change in displacement of the measuring cable causes the shaft of the encoder to rotate by a directly proportional amount which can be recorded. The restoring force of the spring drive holds the measuring cable tight at all times and prevents any sagging which would otherwise induce an error. The measuring drum moves axially on a spindle ensuring that the cable is wound up precisely and reproducibly wrap for wrap in the helical groove of the drum. The nozzle, through which the cable enters the drum, is protected with a brush and a bellow to prevent water or dust entering the drum.

Please note that this product is an accessory. In the "Products" section you will find the corresponding encoders that you can order for your selected article. The linear movement of a flexible steel cable, which can have a length of up to 30 m, is converted into an rotary movement with the aid of a measuring drum. The measuring drum is connected to the shaft of an encoder. In this way a change in displacement of the measuring cable causes the shaft of the encoder to rotate by a directly proportional amount which can be recorded. The restoring force of the spring drive holds the measuring cable tight at all times and prevents any sagging which would otherwise induce an error. The measuring drum moves axially on a spindle ensuring that the cable is wound up precisely and reproducibly wrap for wrap in the helical groove of the drum. The nozzle, through which the cable enters the drum, is protected with a brush and a bellow to prevent water or dust entering the drum.

Please note that this product is an accessory. In the "Products" section you will find the corresponding encoders that you can order for your selected article. The linear movement of a flexible steel cable, which can have a length of up to 60 m, is converted into an rotary movement with the aid of a measuring drum. The measuring drum is connected to the shaft of an encoder. In this way a change in displacement of the measuring cable causes the shaft of the encoder to rotate by a directly proportional amount which can be recorded. The restoring force of the spring drive holds the measuring cable tight at all times and prevents any sagging which would otherwise induce an error. The measuring drum moves axially on a spindle ensuring that the cable is wound up precisely and reproducibly wrap for wrap in the helical groove of the drum. The nozzle, through which the cable enters the drum, is protected with a brush and a bellow to prevent water or dust entering the drum.

Robust industrial cable, 2-wire twisted with screen, black polyurethane sheath, cable diameter 6.3 mm, bending radius 63 mm, temperature range -50 to +121 °C, length 3 meter. Terminations a) Military connector type MIL-C-5015 moulded, 2-pin, b) open cable end

Robust industrial cable, 2-wire twisted with screen, black polyurethane sheath, cable diameter 6.3 mm, bending radius 63 mm, temperature range -50 to +121 °C, length 3 metre. Terminations a) Military connector type MIL-C-5015 moulded, 90° angled, 2-pin, b) Open cable end

KHM 104 BAHO Smallest unit of measure: +/- 0,5 % Temperature compensation: automatic or by way of external sensor from -50 to + 95° C by way of internal sensor from 0 to 60° C Permissible surrounding temperature: 0 to 60° C Permissible surrounding humidity: 0 to 80% (non-condensing) Electricity supply: 9 V block battery (type: JEC 6F"") included in scope of supplies battery EOL indicator: automatic, “BAT” when battery is empty KHM 104 BAHO (BUILDING MATERIALS / WOOD) as in the PROFESSIONAL carrying case S91 digital moisture measuring unit with automatic temperature compensation (ATC), battery, measuring cable, temperature hand sensor, hollow hammer electrode with steel pins, ready to operate with measuring tables for wood and building materials, 100 mm brush probe, conductive paste and red building material plug.