Works services - Import export

For small diameter supply pipes where working is only possible with a winch cable One system for pipe replacement, single pipe bursting and pipe string relining Pipe renewal out of a keyhole possible Application up to 60 m section length at almost constant pulling force Compact modular system for application out of small pits (L x W: 1,20 x 1,00 m) or out of a keyhole (650mm diameter) Fast set up, easy transportation Simple jobsite compatible construction Driven by a hydraulic unit or alternatively via a mini excavator hydraulics Application of winch cables of different diameters by simply exchanging the cable Operation outside the construction pit using a rigboom a and a support frame high working quality, long service life low investment and low operation costs

Removal of loose oxide and electrode-erosion residues, dust deposits or creepage currents which cause soiling in moving contact areas such as motor-vehicle ignition distributors, relay contacts, resistance or potentiometer slideways, in static contact areas such as motor-vehicle spark plugs, plug-in connections, sliding and screw connections, in or on electrical and electronic equipment or devices of all kinds Advantages and benefits Highly effective due to outstanding cleaning properties Broad range of uses for all maintenance and customer service work in electrical sector Fast evaporation after striking surface

For small diameter supply pipes where working is only possible with a winch cable One system for pipe replacement, single pipe bursting and pipe string relining Pipe renewal out of a keyhole possible Application up to 60 m section length at almost constant pulling force Compact modular system for application out of small pits (L x W: 1,20 x 1,00 m) or out of a keyhole (650mm diameter) Fast set up, easy transportation Simple jobsite compatible construction Driven by a hydraulic unit or alternatively via a mini excavator hydraulics Application of winch cables of different diameters by simply exchanging the cable Operation outside the construction pit using a rigboom a and a support frame high working quality, long service life low investment and low operation costs

Perfect integration in your service counter, unhindered access to your merchandise. New possibilities result from integrating the scale in the work area of your service counter. You no longer have to reach around the scale in order to get to the products behind it. A clear view of the scale, by customers and sales staff, creates transparency and trust. ScalePad is almost entirely integrated in the work ledge of the service counter thereby creating valuable free space. The load platter is available in stainless steel or plastic. The plastic version is suitable for modest cutting of product. A juice groove in the food-grade plastic load platter ensures hygiene. For easy cleaning of the ScalePad simply "lift up" the scale.

Geppert Ruhrtechnik offers you a modern working environment with extensive additional services, individual training and further education opportunities as well as health offers. Whether you are a pupil, student, graduate or experienced professional: with us you can contribute your knowledge and skills in a targeted manner. We look forward to committed and passionate people who want to work together towards our goals.

Our patented desuperheater TECtemp HT V venturi cooler is suitable for applications at temperatures up to 750 °C for small pipeline nominal diameters due to non-moving parts in the steam flow. The three-part design makes it possible to bring the control unit with drive out of the high temperature range. The functional principle is based on the proven TECtemp desuperheater. The compact control unit can be removed easily and can be serviced individually for servicing work. This desuperheater is used as a compact solution for small pipelines with a high number of nozzles and small pressure loss requirements.

Our patented desuperheater TECtemp HT L lance cooler is suitable for applications at temperatures up to 750 °C due to non-moving parts in the steam flow. The three-part design makes it possible to bring the control unit with drive out of the high temperature area. The reduced weight of the steam lance has a positive effect on the support load of the steam line. The functional principle is based on the proved TECtemp desuperheater. The compact control unit can be removed easily and can be serviced individually for servicing work.

BEST POSSIBLE ERGONOMICS & EFFICIENCY OF MAINTENANCE: FOR OPERATORS No platform required for machine loading and operating area Pivotable main control panel with good visibility into the work area FOR MAINTENANCE & SERVICE Sliding doors on the back provide generous central maintenance access to the machine, doors in the setup room can be opened wide Central and easily accessible media supply, hydraulic unit and maintenance access for A and W axis through movable housing segment

The HS flex family was developed with the goal of "maximum productivity". Ergonomic aspects were completely redesigned, however, to allow for fast and fatigue-free working for operators and service personnel in every possible working situation. The HS flex handling system can be adapted to six different HERMLE machining centers. With a transport weight of up to 450 kg incl. plate and a storage volume of up to 50 plate positions, the HS flex covers a wide range of applications.

GEDA industrial elevators guarantee the smooth, efficient and safe transportation of people and materials precisely where they are required. Even in the toughest of conditions, GEDA products score highly with customers due to their unique quality and modern car design. The versatile deployment sites of GEDA industrial elevators cover cement works, asphalt mixing plants, chemical plants through cooling towers and silos to offshore plants and explosion-protected areas. Industrial elevators create huge time and cost savings due to efficient workflows in maintenance and service work. The GEDA Standard elevator range covers load capacities from 400 to 3,200 kg. The modular design also provides the customer with the choice of different car dimensions and hoisting speeds of up to 60 m/min. Whatever demands an elevator must meet every GEDA industrial elevator, whether a transport platform or personnel and material hoist or pure material hoist, can be perfectly adapted to on-site conditions.

The Gclimber eco minimizes your efforts for the time consuming ascends and descends that come with service works. The advantages are obvious, the lightweight allinone mobile drive unit is easy to transport can be installed/deinstalled in a second to the basic unit comes with included Ebox

The explosive developing progress concerning technical equipment of buildings and arrangements, has contributed in last decades a lot to the reduction of the environmental impact, with at the same time rising comfort of utilisation. In parallel in addition the rising claims which refer to their servicing, care and maintenance arise steadily. A factor which is dependent particularly in the undeveloped outskirt area on economic solutions in the height access technology. While the rational care of the facade stood already of here as a function of practical height access technologys, today are required on wide level height access technologys which can also enclose assembly works and services with the accordingly higher charges and big work platform lengths with. Hence, transportable arrangements from goracon were conceived for individual application situations, under inclusion of an easy and quick change of location.

Ever-tighter safety regulations and extensive assembly times of a suitable working platform increase the complexity of service work on conical process vessels. For such requirements we have designed an intelligent solution: the customer-specific, modular working platforms for conical process vessels, such as reactors, orbital arm and screw dryers and conical mixers are secure, fast and easy to install. The platforms consist of a stable aluminum construction, are TÜV certified, CE-compliant and can be reused for many years. Their modular design enables installation via manway or other vessel nozzles. The individual modules have a low net weight and are easy to handle: The platform is securely fastened with just a few screws. Special rubber pads protect the vessel’s wall surface. Upon request, we provide working platforms with rescue hatches and any type of flaps – tailor-made to meet customer requirements. Additional features such as ladders are also provided.

The system RS 6000 is a high-performing recycling system that cleans large oil volumes in several process stages. This system was constructed for many years of reliable work without service. By several process steps such as heating and settling, large amounts of water and dirt are removed. Additionally, the usage of settling technology and a pre-filter increases the service life of the main filter. The RS 6000 can be operated manually, semi- automatic, and fully automatic. It is the ideal recycling system for central treatment of, for example, cutting oil or cooling lubricants. 400 V asynchronous-motor Robust, stable gear pump Free choice of settling- and heating times and the number of filter passes Either manual, semi-automatic, or fully automatic operation Displays for operation- and process status Flow regulation for high viscosity oils Element lifter for fast filter exchange

The portable, mobile ultra fine filter system M 121 was especially created for small units and those difficult to access. With the help of this robust design oil changes and the risk of spontaneous breakdowns can significantly be reduced. By using our cost-effective 61 filter elements, high oil purity and the elimination of water in oil is guaranteed, despite low investment costs. As the M 121 is portable, and driven by a 230 V- asynchronous motor, it is the optimal tool for flexible service work. 230 V asynchronous motor, contactless Stable gear pump Manometer for flow- and element control 24/7 – unattended operation Variable pressure regulation Transfer-circuit Flow regulation for high viscosity oils Including 1.5 meter flow-/return hose Easy operation: „plug & clean“

The small dimensions of the hydraulic force transducers of the model series TesT 1001 / 1011 / 1021 as well as the flat building method permit versatile applications. The small transducers were conceived for occasional control measurements, e.g. for adjusting or service work. The indicating instruments of model versions 1001 and 1011 have a diameter of 63 mm. The indicating instrument of model version 1021 can have a diameter of 63 mm or 100 mm. All model versions possess a drag indicator to display peak values.

The EMA 84 is a portable, battery-powered digital pressure gauge providing highly accurate measurements of positive and negative differential pressures. Because it is durable and easy-to-use, the EMA 84 lends itself well to maintenance work and customer service applications for heating, air-conditioning and ventilation units, where it can be used for monitoring filters, measuring fireplace drafts, etc. Its precision and reproducibility also make the EMA 84 is highly suitable for use in laboratory applications.

ATN completed the transition from a pure engineering company to a plant construction company back in 1996. ATN has been offering comprehensive solutions for water treatment for 25 years. Our services encompass design, engineering, delivery, assembly and startup of turnkey planst as well as future service and maintenance work. Thanks to cooperation and strategic alliances with our partners, we can concentrate on our core competence and deliver comprehensive solutions from a single source. ATNplantsare produced by carefully selected longterm partners. When selecting our partner companies, we make the highest quality a priority. We are clearly committed to Germany as a production location, and to German manufacturing values.

Customer service and system maintenance – fast and future- oriented. Our goal is to create low- maintenance systems that guarantee maximum precision and maximum work capacities. Of course we also adapt our systems to satisfy our customers’ individual needs and to meet special requirements. We develop solutions to perfectly integrate our soldering systems into any given production process. At any time, STRECKFUSS SYSTEMS provides customers with spare parts, wearing parts, and alteration parts. We are a service team of experienced electrical engineers, mechanical engineers and system manufacturers. Beside the firm maintenance dates, our team is always available for short- notice duties. STRECKFUSS SYSTEMS guarantees an excellent customer service and takes on the responsibility for all system maintenance work with regard to both the new STRECKFUSS soldering systems and older models. Our customer service – an overview: commissioning briefing user training system inspection system maintenance system repair works on- call service system modification waste management